Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Synchronization of amniotic fluid cells for high resolution cytogenetics

A high resolution technique was applied to amniotic fluid cells by synchronization. After inoculation, the cells were incubated for 30 h in the presence of either thymidine or 5-bromodeoxyuridine (BrdU). After removal of the blocking agent and addition of a low concentration of thymidine, the cells were incubated for another 6 1/2–7 h, then harvested in prometaphase without colcemid. This technique gives a mitotic index of 3·7 per cent after thymidine synchronization and of 3·2 per cent after BrdU synchronization, and more than half of the mitoses were in the earlier phases with the chromosomes showing more than 550 bands per haploid set. GBG, GTG, and RHG prometaphases are presented. Precise high-resolution banding of chromosomes of amniotic fluid cells can increase diagnostic accuracy.     

Ozonation of o-cresol in aqueous solutions using a rotating packed-bed reactor.

Experimental results indicated that ozone transfer in the rotating packed contactor was noticeably greater than in a traditional packed-bed contactor under similar operational conditions. Ozonation in the rotating packed contactor has been shown to be feasible for achieving nearly complete decomposition of o-cresol within 1 hour. The decomposition of o-cresol by ozonation in the rotating packed contactor increased with increasing rotor speed and decreasing the gas-liquid flowrate ratio. However, the reduction of total organic carbon during the ozonation of o-cresol was not influenced by variation of rotor speed and gas-liquid flowrate ratio. The species distribution of o-cresol under various solution conditions plays a significant role in determining the decomposition behavior. In most experiments conducted in this study, the decomposition of o-cresol by ozonation was more favorable under alkaline conditions.     

The co-movements between geothermal energy usage and CO2 emissions through high and low frequency cycles

Environmental Science and Pollution Research - Geothermal energy is considered environmentally friendly than fossil fuel sources, and geothermal power plants are expected to have a low carbon...     

成团泛菌(Pantoea agglomerans)对镉胁迫下蒌蒿耐受性的影响

为探讨功能微生物对镉(Cd)胁迫下蒌蒿耐受性的影响,以成团泛菌(Pantoea agglomerans)J2为对象,通过盆栽试验,研究不同Cd处理水平下J2菌对蒌蒿生长、生理、Cd富集转运与根际微生态的影响。结果表明:J2菌可显著促进蒌蒿株高、地上部干重、地下部干重、总生物量及根冠比的增加。在J2菌的作用下,蒌蒿叶绿素a、叶绿素b和总叶绿素含量以及超氧化物歧化酶(SOD)、过氧化物酶(POD)和过氧化氢酶(CAT)活性均显著增加,丙二醛(MDA)含量明显减少。J2菌可显著促进蒌蒿对Cd的富集转运,蒌蒿地上部、地下部与总Cd含量均显著增加,地上部生物富集系数(BCF)明显大于地下部,转运系数(TF)相比于对照增加了7.5%~37.4%。J2菌可显著增加蒌蒿根际土壤细菌、放线菌数量及微生物总量,明显减少真菌数量。研究表明成团泛菌J2对蒌蒿生长、生理、Cd富集转运与根际微生态可产生积极影响,在一定程度上可提高蒌蒿植株对Cd的耐受性。     

Assessing contamination of smoked sprats (Sprattus sprattus) with polycyclic aromatic hydrocarbons (PAHs) and changes in its level during storage in various types of packaging

The analysis of material used in this study demonstrated that the amount of polycyclic aromatic hydrocarbons (PAHs) in smoked sprats varies from the level below the lowest detection limit in muscles up to 9.99 µg kg^?1 of benzo[a]pyrene (BaP) in fish skin. Such a high level of PAHs in skin was reported only in one of six batches of sprats, while mean BaP level was at 1.69 µg kg^?1. Regardless such a high BaP level in skin, its concentration in muscles did not exceed the maximum acceptable level. The study objective was to assess to what extent packaging materials adsorb PAH compounds from food. Changes in the PAH levels were monitored in fish during their storage in packages made of various materials. The storage time was from 0 to 168 hours. The obtained results varied considerably, therefore their scatter did not allow to confirm unequivocally the preliminary hypothesis about the reduction of PAHs due to their migration to packaging material. However, analysis of the packaging used in this study demonstrated a significant increase in the level of total 16 PAHs. When high-density polyethylene (HDPE) packaging was analysed, a six-fold increase in the total 16 PAHs was observed comparing to the blank sample.     

Rheological and sensory properties of hydrophilic skin protection gels based on polyacrylates

Introduction. With the current increases in occupational skin diseases, literature data attesting the decreasing efficiency of barrier creams with respect to the manufacturer’s declarations and legal regulations granting skin protection gels for employees, research is required to analyse and evaluate the recipes used for hydrophilic skin protection gels based on polyacrylates. Methods. This study investigated the rheological properties, pH and sensory perception of hydrophilic barrier gels based on polyacrylates. Results. The acrylic acid derivatives used were good thickeners, and helped to form transparent gels of adequate durability. They could be used to create hydrophilic films on the surface of the skin to protect it against hydrophobic substances. A correlation was shown between the results of the rheological properties and the barrier properties of the gels. This confirms the possibility of monitoring the quality of the gels at the stage of recipe development. Conclusions. Polyacrylates are viable for use in industry to produce hydrophilic barrier creams suitable for skin protection.     

A diagnostic comparison of measured and model-predicted speciated VOC concentrations

This study compares speciated model-predicted concentrations (i.e., mixing ratios) of volatile organic compounds (VOCs) with measurements from the Photochemical Assessment Monitoring Stations (PAMS) network at sites within the northeastern US during June–August of 2006. Measurements of total non-methane organic compounds (NMOC), ozone (O₃), oxides of nitrogen (NO_x) and reactive nitrogen species (NO_y) are used for supporting analysis. The measured VOC species were grouped into the surrogate classes used by the Carbon Bond IV (CB4) chemical mechanism. It was found that the model typically over-predicted all the CB4 VOC species, except isoprene, which might be linked to overestimated emissions. Even with over-predictions in the CB4 VOC species, model performance for daily maximum O₃ was typically within ±15%. Analysis at an urban site in NY, where both NMOC and NO_x data were available, suggested that the reasonable ozone performance may be possibly due to compensating overestimated NO_x concentrations, thus modulating the NMOC/NO_x ratio to be in similar ranges as that of observations.