The dissipation,distribution and fate of a branched 14C-nonylphenol isomer in lake water/sediment systems

A single tertiary isomer which is believed to be one of the major branched isomers of the isomeric nonylphenol was synthesized for use in investigations on its metabolism and estrogenicity in aquatic organisms. The physico-chemical properties of the isomer were determined to enable the prediction of its behaviour in aquatic environments. From laboratory investigations on its dissipation and distribution in lake water, which are reported in this paper, it was found that it had a half-life of dissipation of 38.1 days and 20.1 days in an open lake water and in an open lake water/ sediment system, respectively, and to be rapidly partitioned in to sediment giving a high concentration factor of 1.76 after 28 days with an initial dose concentration of 2.52 ppm. The main dissipation route was found to occur through volatilization and co-distillation. The isomer was, however, found to be resistant to biodegradation in both the lake water and sediment, showing only a slight 9% loss (after 56 days) and 4.2% loss (after 28 days), of the 14C-residues in lake water and lake water/sediment systems, respectively, by microbial activity. Transformation to other more polar metabolites possibly by hydroxylation was also found to be minimal in both lake water and sediment samples after 14 days by HPLC analysis. After 7 days, only 2.25 and 7.4% transformation to a more polar metabolite was detected in lake water and sediment samples, respectively.     

Laboratory degradation studies of bentazone, dichlorprop, MCPA, and propiconazole in Norwegian soils

Laboratory degradation studies were performed in Norwegian soils using two commercial formulations (Tilt and Triagran-P) containing either propiconazole alone or a combination of bentazone, dichlorprop, and MCPA. These soils included a fine sandy loam from Hole and a loam from Kroer, both of which are representative of Norwegian agricultural soils. The third soil was a highly decomposed organic material from the Froland forest. A fourth soil from the Skuterud watershed was used only for propiconazole degradation. After 84 d, less than 0.1% of the initial MCPA concentration remained in all three selected soils. For dichlorprop, the same results were found for the fine sandy loam and the organic-rich soil, but in the loam, 26% of the initial concentration remained. After 84 d, less than 0.1% of the initial concentration of bentazone remained in the organic-rich soil, but in the loam and the fine sandy loam 52 and 69% remained, respectively. Propiconazole was shown to be different from the other pesticides by its persistence. Amounts of initial concentration remaining varied from 40, 70, and 82% in the reference soils after 84 d for the organic-rich soil, fine sandy loam, and loam, respectively. The organic-rich soil showed the highest capacity to decompose all four pesticides. The results from the agricultural soils and the Skuterud watershed showed that the persistence of propiconazole was high. Pesticide degradation was approximated to first-order kinetics. Slow rates of degradation, where more than 50% of the pesticide remained in the soil after the 84-d duration of the experiment, did not fit well with first-order kinetics.     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Effects of Social Structure and Prey Dynamics on Extinction Risk in Gray Wolves

Extinction models based on diffusion theory generally fail to incorporate two important aspects of population biology—social structure and prey dynamics. We include these aspects in an individual-based extinction model for small, isolated populations of the gray wolf (Canis lupus). Our model predicts mean times to extinction significantly longer than those predicted by more general (diffusion) models. According to our model, an isolated population of 50 wolves has a 95% chance of surviving just 9 years and only a 30% chance of surviving beyond 100 years. Reflecting the influence of social structure, a wolf population initially comprising 50 individuals is expected to persist only a few years longer, on average (71 years), than is a population initially comprising just a single reproductive pair (62 years). In contrast, substantially greater average prey abundance leads to dramatically longer expected persistence times. Autocorrelated prey dynamics result in a more complex distribution of extinction times than predicted by many extinction models. We contend that demographic stochasticity may pose the greatest threat to small, isolated wolf populations, although environmental stochasticity and genetic effects may compound this threat. Our work highlights the importance of considering social structure and resource dynamics in the development of population viability analyses.     

Oxidative dealkylation of five phenylurea herbicides by the fungus CunninghamellaechinulataThaxter

Microorganisms isolated from soil degrade phenylurea herbicides via two major pathways: (i) direct hydrolysis by an amidase leading to N,O-dimethylhydroxylamine, CO₂ and aniline¹ and (ii) N-dealkylation, which has been described as the first step in urea herbicide degradation by a variety of organisms including mammals, plants and microbial systems (for a review see reference 2).Until now no attempts have been made to investigate the mechanism of N-demethylation of substituted ureas in soil microorganisms, due to the instability of the N-hydroxymethyl intermediates. This reaction mechanism has only been described in detail in green plants^3–5. As among soil fungi Phycomycetes are known to demethylate phenylurea herbicides^6,7 this study has been made to identify intermediate hydroxymethyl compounds from urea herbicides, when incubated with the fungus $\text{Cunninghamella echinulata Thaxter}$.     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

CAN SCRAP SAVE US FROM DEPLETION?

Old scrap constitutes varied proportions of consumption of different metals. The authors construct a model in which the share of scrap in total supply is explained by three factors, the growth rate in overall demand for the metal; the share of metal contained in scrapped products actually recovered; and the durability of metal containing products. The model is used to study the impact on the share of scrap in total supply from changes in each of the factors. The strongest impact appears to follow from changes in the growth rate of overall demand. Inserting empirical data for copper into their model, the authors suggest, for instance, that in the long run old scrap could satisfy 100 per cent of copper demand, provided that this demand contracted by 1 per cent per year. La ferraille constitue des proportions variées d'utilisation de différents métaux. Les auteurs de cet article ont construit un modèle dans lequel la part de ferraille dans 'approvisionnement total est expliquée par le jeu de trois facteurs: le taux de croissance de la demande globale pour le métal, la part de métal contenue dans des débris de métaux effectivement récupérés et la durabilité des métaux renfermant des produits. Le modèle est utilisé pour étudier les incidences des changements dans chacun des facteurs sur la part de ferraille dans 'offre totale. L'incidence la plus importante semble provenir de modifications dans le taux de croissance de la demande globale. En introduisant des données empiriques pour le cuivre dans leur modèle, les auteurs suggèrent par exemple, qu' à longue échéance, la ferraille pourrait répondre à la demande totale en cuivre pourvu que cette demande se réduise d'un pour cent par année. El uso de chatarra representa una proporción variable del consumo de los diferentes metales. En este artículo los autores presentan un modelo en el que la proción de la chatarra en la oferta de un metal depende de tres factores: la tasa de crecimiento de la demanda global del metal, la proción del metal contenido en la chatarra recuperada, y la durabilidad o vida económica de los productos que contienen el metal en cuestión. El modelo se utiliza para estudiar el impacto sobre la proporción de chatarra en la oferta total causado por las variaciónes de cada uno de estos factores. El mayor impacto parece ocurrir debido al cambio en la tasa de crecimiento de la demands global. Al utilizar el modelo con datos para el cobre, los autores sugieren, por ejemplo, que en el largo plazo la chatarra de cobre podría satisfacer el cien por ciento de la demanda de este metal siempre que dicha demanda se contraigo en uno por ciento por año.     

Aerobic dechlorination of cis- and trans-dichloroethenes by some indigenous bacteria isolated from contaminated sites in Africa

IntroductionChlorinatedethenesareamongthemostcommoncontaminantsobservedingroundwatersystems (Bouwer,1994;McCarty,1994) .Thesecompoundsvaryinnumberofchlorinesubstituents,fromthemostchlorinated,terachloroethene (PCE ) ,tothemonochlorinatedvinylchloride (VC …