Effect of chelating agents in phytoremediation of heavy metals

Chelate‐assisted metal uptake by plants has only recently been discovered in the remediation industry. The simultaneous accumulation of lead, arsenic, copper, and cadmium in plants after application of chelating agents to soil is a promising technology enhancement for phytoremediation. One of the most powerful and commonly used chelating agents is ethylene diamine tetra acetic acid (EDTA), which forms complexes with many of the metal contaminants within the natural environment. This study was conducted to determine the efficiency of an emergent wetland plant species Typha sp. and floating wetland macrophytes such as Pistia sp., Azolla sp., Lemna sp., Salvinia sp., and Eichhornia sp. in phytoremediation of various heavy metals with addition of a chelating agent such as EDTA. EDTA addition to the treatment systems increased the uptake of heavy metals by plants, which was much pronounced with lead and copper. However, the pattern of uptake by plants was similar as that of heavy metals without EDTA amendments. © 2012 Wiley Periodicals, Inc.     

Impact of Ni(II), Zn(II) and Cd(II) on biogassification of potato waste

A study was conducted on anaerobic digestion of potato waste and cattle manure mixture, inoculated with 12% inoculum and diluted to 1:1 substrate water ratio at 37 +/- 1 degrees C. Initially pH of substrate was found to be 4.5 to 5.0. Lime and sodium bicarbonate solutions were employed to adjust the pH to 7.5. Biogas production continued up to 10 and 7 days, when lime and sodium bicarbonate solutions were used to adjust the pH, respectively. Biogassification potential was studied in response to different ratio of waste and cattle manure. Biogas production rate was higher when potato waste and cattle manure were used in 50:50 ratio. Effect of two different concentrations (2.5 and 5.0 ppm) of three heavy metals viz. (Ni (II), Zn (II) and Cd (II)) on anaerobic digestion of substrate (potato waste--cattle manure, 50:50) was studied. At 2.5 ppm, all the three heavy metals increased biogas production rate over the control value. The percentage increase in biogas production over the control was highest by Cd, followed by Ni and Zn. In all the treatments, methane content of biogas increased with increase in time after feeding. Various physico-chemical parameters viz. total solids, total volatile solids, total organic carbon and chemical oxygen demand considerably declined after 7 days of digestion and decline was greater in presence of heavy metals as compared to control. The physico-chemical parameters revealed maximum decrease in the presence of 2.5-ppm concentrations of heavy metals with the substrate. Among all the three heavy metals employed in the study, Cd++ at 2.5 ppm was found to produce maximum biogas production rate. The use of three heavy metals to enhance biogas production from potato and other horticultural waste is discussed.     

Application of enzyme-linked immunosorbent assay analysis for determination of monensin in environmental samples

There is growing concern that antibiotic use in livestock production is contributing to contamination of soil and aquatic environments. Monensin, a polyether ionophore antibiotic, accounts for approximately 13% of total subtherapeutic livestock antibiotic usage in the USA and has been widely detected in aquatic environments. Due to insufficient ultraviolet absorbance, liquid chromatography analysis of monensin in environmental samples is limited to equipment with mass spectrometry (e.g., liquid chomatography-mass spectrometry [LC-MS]). However, LC-MS equipment is costly, and extensive sample preparation and clean-up is often required. Rapid, low-cost analytical techniques are needed to monitor for monensin residues in the environment. In this study, a commercially available enzyme-linked immunosorbent assay (ELISA) for detecting monensin in animal feed extracts was evaluated for determination of monensin in water, soil, and manure. The monensin ELISA was highly sensitive, with limits of detection and quantification at 1.5 and 3.0 microg L(-1), respectively. Recovery of monensin in spiked water samples was approximately 100%. Cross-reactivity was not observed with similar polyether ionophores, tetracyclines, macrolides, or sulfonamides. Concentrations of monensin using ELISA were greater than concentrations measured with LC-MS. This is attributed to cross-reactivity of the monensin ELISA toward structurally similar monensin compounds, such as factors (slight naturally produced structural variants) and metabolites. Results from this study showed that ELISA can be a reliable, rapid, and low-cost alternative to LC-MS analysis of environmental samples.     

A stochastic approach for the operation of a wind and pumped storage plant under a deregulated environment

To improve the competiveness in the energy market, it is necessary that the wind power plants provide guaranteed power generation, although, it is not possible to forecast power availability from wind power plant accurately. This paper presents a stochastic model and solution technique for the combined operation of wind and pumped storage power plants to improve the power availability and increasing the profit considering uncertainties of wind power generation. In this model, uncertainties in wind data have been forecasted for grid connected day-ahead market using Weibull distribution model. The imbalances in the forecasted wind data and the market demand have been reduced by operating the pumped storage power plant. In this stochastic mixed integer problem, pumped storage plant can take the supply either from the grid or from the wind power plant for the pumping operation to store the energy in order to utilize this energy during peak hours for increasing the overall revenue. The reliability of the pumped storage is improved by replacing the conventional unit with the adjustable speed type pumped storage unit. In order to prove the optimality of the solution, two case studies were considered. In case study–I, scheduling is provided by operating the conventional pumped storage unit, whereas in case study–II, adjustable speed pumped storage unit has been used. It has been found that the adjustable speed pumped storage unit has further reduced the imbalance between generated power and demand. The complete approach has been formulated and implemented using AMPL software.     

Artificially roughened solar air heater: A comparative study

Artificially roughened solar air heater has been topic in research for the last 30 years. Prediction of heat transfer and fluid flow processes of an artificially roughened solar air heater can be obtained by three approaches: theoretical, experimental, and computational fluid dynamics (CFD). This article provides a comprehensive review of the published literature on the investigations of artificially roughened solar air heater. In the present article, an attempt has been made to present holistic view of various roughness geometries used for creating artificial roughness in solar air heater for heat transfer enhancement. This extensive review reveals that quite a lot of work has been reported on design of artificially roughened solar air heater by experimental approach but only a few studies have been done by theoretical and CFD approaches. Finally this article presents a comparative study of thermo-hydraulic performance of 21 different types of artificial roughness geometries attached on the absorber plate of solar air heater in terms of thermo-hydraulic performance parameter. Heat transfer and friction factor correlations developed by various investigators for different types of artificially roughened solar air heaters have also been reported in this article.     

Biodiesel production from a free fatty acid containing Karanja oil by a single-step heterogeneously catalyzed process

Karanja oil, containing 6.2% free fatty acids (FFAs), was considered for biodiesel production using a single-step solid-phase acid catalyzed process. Different types of zeolites and Amberlyst15 catalysts were tested and biodiesel was produced. Under similar conditions, the highest biodiesel yield was achieved using an Amberlyst15 catalyst, which contained 3–5% of moisture. The effects of operating parameters of the reaction such as reaction temperature, catalyst amount, and methanol-to-oil ratio were studied. An increase of methanol:oil ratio revealed a non-monotonic increase in biodiesel yields. Similar non-monotonic behavior was observed when Jatropha oil was used. Leaching and catalyst reusability were also considered. No significant effects of leaching were observed and catalyst reusability appeared to be affected by methanol interactions. The presence of a co-solvent, Tetrahydrofuran (THF), increased the biodiesel yield. Furthermore, an optimum amount of THF (THF:methanol volume ratio of 1:2) gave rise to the highest biodiesel yield. A biodiesel yield of 93% was achieved at 120 °C using a single-step process with Amberlyst15 as a catalyst, THF as a co-solvent, and a methanol:oil ratio of 30:1.     

Management of Fly Ash Through Vermicomposting: A Rational Approach

Fly ash is a by‐product of coal combustion in thermal power plants. Its generation poses several environmental problems, the most important ones being its capacity for causing pollution and the need for large storage areas to keep it out of the environment. Fly ash management remains a major concern in the 21st century; however, despite these challenges, the material has great potential for beneficial use in agriculture due to its efficacy in modifying and improving soil health and improving crop performance. Vermicomposting is an excellent technique for reducing the toxic heavy metals in fly ash through the introduction of earthworms. The activities of several earthworm species minimize the solubility of heavy metals and increase the bioavailability of major nutrient elements such as phosphorous (P) and nitrogen (N). This article provides a comprehensive review of the scope and benefits of vermiremediating fly ash, demonstrating the abilities of different species of earthworms to accumulate heavy metals and increase the availability of plant nutrients. On the basis of a literature survey, the authors have concluded that adopting vermicomposting technology promises increased, effective fly ash utilization for agricultural benefits.     

Tourism and wetland conservation: application of travel cost and willingness to pay an entry fee at Ghodaghodi Lake Complex,Nepal

This study investigated the need and applicability of wetland tourism for resource conservation, using the case of Ghodaghodi Lake Complex, a Ramsar Site in western Nepal. The travel cost method (TCM) was used to determine the recreation potential of the lake complex, while the contingent valuation method (CVM) was used to calculate willingness of visitors to pay an entry fee as a payment vehicle for conservation. The per capita travel cost was found to be NPR 540 (US $7.71), while the mean willingness to pay an entry fee was NPR 34 (US $0.48) per visitor per entry. In addition, factors affecting wetland visitation rates and maximum willingness to pay were identified. Policy implications include the establishment of an entry fee system to offset conservation budgetary constraints, government investment in social benefits equating to at least per capita travel cost identified, and public‐private partnerships, with community participation in tourism promotion and wetland conservation.