Assessment of biomass and lipid productivity and biodiesel quality of an indigenous microalga Chlorella sorokiniana MIC-G5

Generation of biodiesel from microalgae has been extensively investigated; however, its quality is often not suitable for use as fuel. Our investigation involved the evaluation of biodiesel quality using a native isolate Chlorella sorokiniana MIC-G5, as specified by American Society for Testing and Materials (ASTM), after transesterification of lipids with methanol, in the presence of sodium methoxide. Total quantity of lipids extracted from dry biomass, of approximately 410–450 mg g^?1 was characterized using FTIR and ¹H NMR. After transesterification, the total saturated and unsaturated fatty acid methyl esters (FAMEs) were 43% and 57%, respectively. The major FAMEs present in the biodiesel were methyl palmitate (C16:0), methyl oleate (C18:1), and methyl linoleate (C18:2), and the ¹H NMR spectra matched with criteria prescribed for high-quality biodiesel. The biodiesel exhibited a density of 0.873 g cm^–3, viscosity of 3.418 mm² s^?1, cetane number (CN) of 57.85, high heating value (HHV) of 40.25, iodine value of 71.823 g I₂ 100 g^?1, degree of unsaturation (DU) of 58%, and a cold filter plugging point (CFPP) of –5.22°C. Critical fuel parameters, including oxidation stability, CN, HHV, iodine value, flash point, cloud point, pour point, density, and viscosity were in accordance with the methyl ester composition and structural configuration. Hence, C. sorokiniana can be a promising feedstock for biodiesel generation.     

Microbial population dynamics under fertigation by distillery effluent in sugarcane-ratoon cropping system

Distillery effluents, a major by-product of distilleries are a major environmental hazard as they are rich in organic matter, micro- and macroelements. Management of this enormous amount of nutrient-rich effluent and its effective utilization is a major challenge. These effluents can be used as a source of nutrient by C₄ crops like sugarcane and subsequent ratoon crops under fertigation system. Impact of fertigation in sugarcane-ratoon cropping system on soil microbial biomass is important as the microbial population plays an important role in the nutrient and biogeochemical recycling. Keeping this in mind, a field experiment was carried out in the sandy loam soil of semi-arid to humid sub-tropical climate of Gajraula (28.85°N, 78.23°E) region, India with different doses of diluted and undiluted effluent for fertigation of sugarcane crop in presence and absence of 50 % recommended dose of fertilizers with suitable replicates. Two post-sown irrigations with four times diluted effluent gave the maximum yield in case of sugarcane crop. Taking into consideration the yield and the culturable microbial population sizes, it can be concluded that one to two post-sown irrigations with diluted effluent can be used to enhance soil fertility in terms of microbial population and to enhance sugarcane and ratoon crop productivity. This package is economically viable and can also take care of distillery waste management and reduction in consumption of chemical fertilizers by 50 %, a key for sustainable agricultural development.     

Growth and metal removal potential of a Phormidium bigranulatum-dominated mat following long-term exposure to elevated levels of copper

The present study explores the tolerance and metal removal response of a well-developed 2-week-old Phormidium mat after long-term exposure to Cu²⁺-enriched medium. Cu²⁺ enrichment inhibited increase in mat biomass in a concentration-dependent manner. Mat area and the number of entrapped air bubbles decreased as Cu²⁺ concentration increased in the medium. Decrease in number of air bubbles obviously reflects the adverse effect of Cu²⁺ on photosynthetic performance of the mat. Metal enrichment did not substantially alter the amount of pigments, such as chlorophyll a, chlorophyll b, carotenoids, and phycocyanin, in the mat. Enhancement of Cu²⁺ concentration in the medium led to changes in species composition of the test mat; however, Phormidium bigranulatum always remained the dominant organism. Relative share of green algae and some cyanobacterial taxa, namely, Lyngbya sp. and Oscillatoria tenuis, in the mat were increased by Cu²⁺ enrichment. The mat successfully removed 80 to 94 % Cu²⁺ from the growth medium containing 10 to 100 μM Cu²⁺. Extracellular polysaccharides, whose share increased in the mat community after metal addition, seem to have contributed substantially to metal binding by the mat biomass.     

In vivo and in vitro control activity of plant essential oils against three strains of Aspergillus niger

Environmental Science and Pollution Research - Contamination of environment and food from the prevalent spores and mycotoxins of Aspergillus niger has led to several diseases in humans and other...     

Computer Simulation of a Municipal Solid Waste Combustor

A mathematical model has been developed to study the thermal and chemical processes occurring In a municipal solid waste mass combustor. Treating the solids feed as a mixture of pseudo-components, the model determines the Interrelationships between the solids feed rate, grate travel rate and length, amounts and distributions of primary and secondary air, extent of solids burn out, and the bed and flame temperatures. The model Incorporates the kinetics of pyrolysis of solids and simulates heat and mass transfer within the bed.

The temperature and mass flow profiles generated show that much of the grate Is taken up by the heatup and burnout zones. The heatup zone can be reduced by distributing the primary air to maintain minimal air flow In that region, thereby permitting rapid heatup. Increasing the solids feed rate and adjusting the air flow distributions can reduce the length of the burnout zone. The computer program, available on both PCs and mainframe, can be used for different MSW Incinerator dimensions and feed parameters to Investigate the effects of the control variables and optimize the desired output characteristics, e.g., maximize solids throughput.     

Sewage fluxes and seasonal dynamics of physicochemical characteristics of the Bhagirathi-Hooghly River from the lower stretch of River Ganges,India

ABSTRACT

To understand the temporal variations of the physicochemical characteristics of the Bhagirathi-Hooghly River (BHR), three locations representing three districts of West Bengal were selected. The material fluxes from 34 drains during pre-monsoon season was quantified. The analysis of variance (ANOVA) revealed that no significant spatial variations were observed for the physicochemical parameters, whereas seasonal variations were significant. The mean discharge was found to be highest (247.2?×?10³?m³?d^?1) in the midstream drains. Highest mean concentrations of dissolved oxygen (DO) (7.35?mg?L^?1) and nitrate (0.81?mg?L ^?1) were observed during the post-monsoon season followed by the monsoon and pre-monsoon. According to the BIS, WHO and the European standard of water quality (pH, 6.5–8.5; Nitrate, 0–2.5?mg?L^?1;DO, ≥5?mg?L^?1), the results of the respective parameters revealed the BHR system is maintained at high to good water quality, meaning that the BHR system is slightly altered from its pristine environment. The mean concentrations of biological and chemical oxygen demands were found to be high during the monsoon season, revealing that a large quantity of refractory organic matter is transported to the eastern Bay of Bengal from the Ganges.     

Class-2 hazmat transportation consequence assessment on surrounding population

The transportation of hazardous materials by road is an utmost necessity of the world for the societal benefits, but at the same time the activity is inherently dangerous. Incidents involving hazardous material (hazmat) cargo particularly the class-2 materials can lead to severe consequences in terms of fatalities, injuries, evacuation, property damage and environmental degradation. The rationale behind considering class-2 hazmats is that they pose the greatest danger to the people and property along the transport route because of their storage condition on the transport vessel. They are stored either in pressurized vessels or in cryogenic containers. Any external impact due to collision may cause catastrophic failure of transport vessels, known as BLEVE (Boiling Liquid Expanding Vapour Explosion) with devastating consequences. Further, any continuous release from containment may cause what is known as ‘Unconfined Vapour Cloud Explosion’ (UVCE). Historically frequency of BLEVE occurrence is of the order of 1 × 10⁻⁶ per year or less, but other release scenarios e.g. a large vapour or liquid leaks are more probable and could also have devastating effects on the surrounding population. As such, the paper discussed various event scenarios and the consequences taking examples of a class-2.1 material (1,3 butadiene) and another class-2.3 (ammonia) hazmat. Comparative analysis suggests that per ton basis a rupture of ammonia tanker gives rise to larger impact areas and poses larger lethality risks compared to 1,3 butadiene as far as toxic effects are concerned. Besides, from fireball fatality on similar basis propylene causes higher consequence distance than LPG followed by ethylene oxide and 1,3 butadiene. The impact zone study results may be utilized as inputs for identifying the potential vulnerable area on a GIS enabled map, along a designated State highway route passing through an important industrial corridor in western India.