Pyrolysis kinetics and residue characteristics of petrochemical industrial sludge

This study investigated the pyrolysis characteristics of sludge from wastewater treatment plants in the petrochemical industry and focused on the pyrolysis kinetics, elemental composition of residue, and volatile organic compounds (VOCs) of exhaust gas. As pyrolysis temperature increased to 773 K, the increasing rate of crude oil production tended to a stable condition. The result indicated that the optimal temperature of crude oil and water mixed production was 773 K. When pyrolysis temperature increased from 673 to 973 K, carbon, oxygen, nitrogen, and hydrogen concentrations of residue decreased and the sulfur concentration of residue increased. The concentrations of benzene, toluene,ethylbenzene, and styrene increased by the increasing pyrolysis temperature. We found that the reaction order of sludge pyrolysis was 2.5 and the activation energy of the reaction was 11.06 kJ/mol. We believe that our pyrolysis system is transitional between devolatilization and combustion.     

Maximum nitrogen removal in the step-feed activated sludge process.

This paper presents a mathematical framework that can be used to determine the flow distributions for a step-feed activated sludge process that result in maximum nitrogen removal. The model indicates that nitrogen removal efficiency in a step-feed activated sludge process is highly dependent on the ultimate biochemical oxygen demand (BOD(L))-to-total Kjeldahl nitrogen (TKN) ratio of the wastewater. For typical domestic wastewater, which has a relatively high BOD(L)-to-TKN ratio, the step-feed process will outperform the Modified Ludzack-Ettinger process for nitrogen removal, when the flow to each step is optimally distributed. Using plant-specific water quality data and operating conditions from a 1-year period, nitrogen removal performance for four step-feed activated sludge plants operated by the Sanitation Districts of Los Angeles County (California) was calculated using the developed model. The calculated nitrogen removal efficiencies match well with the actual plant performance data. These results validate the model as a useful tool for predicting nitrogen removal in a step-feed activated sludge process. Other analyses revealed that improvements in nitrogen removal at existing facilities are achievable by adjusting the split of primary effluent flow to each anoxic zone several times during the day. The timing of the adjustments and the optimal flow splits can be determined from data on diurnal fluctuations in BOD(L) and TKN concentrations. An example is provided to illustrate the application of such an operating strategy and the potential enhancement of nitrogen removal.     

Quantification of the dissolved organic matter effect on the sorption of hydrophobic organic pollutant: application of an overall mechanistic sorption model

This study presents an overall sorption model to estimate the sorption equilibrium coefficients of hydrophobic organic pollutants for heterogeneous aquatic systems. This proposed model combines a series of sorption equilibrium relationships including the adsorption of dissolved organic matters on particulates, the binding between organic pollutants and dissolved organic matters, and the sorption of organic pollutants on particulates with or without the presence of dissolved organic matters. By using this model, variations among the sorption equilibrium coefficients with the concentrations of dissolved organic matters are obtained. Also discussed herein are case studies involving pollutants having a wide spectrum of K(ow)s, different types of dissolved organic matters, different pH values and ionic strengths. In most of the case studies, the sorption equilibrium coefficients initially increase with the-concentrations of dissolved organic matters and, then, decrease after reaching a maximum value. This study also addresses the relative errors of partition coefficients attributed to the negligence of the effect caused by the dissolved organic matter, the so-called third-phase effect.     

Degradation of carbofuran in water by solar photocatalysis in presence of photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 x 10(-6) M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

华东区域PM2.5变化背景下浙江省人口经济暴露水平评估

利用1998~2012年卫星反演的细颗粒物(PM_(2.5))全球高精度产品数据集,精细化地给出了华东地区PM_(2.5)时空分布与变化特征,并分析了此背景下浙江省PM_(2.5)的人口经济暴露水平.结果表明1998~2012年期间,浙江省区域平均PM_(2.5)浓度整体变化呈现出先增加、后下降的特征,拐点出现在2007~2009年前后,与华东区域大背景的变化趋势一致.1998~2000年华东南部与山东东部的年平均PM_(2.5)浓度基本保持在50μg·m~(-3)以下,其余地区大多在50~75μg·m~(-3)左右,华东地区和浙江省PM_(2.5)浓度超过35μg·m~(-3)的地区分别占到51.8%和21.1%.1998~2009年PM_(2.5)浓度上升趋势非常明显,华东地区的平均变化趋势为2.58μg·(m~3·a)~(-1),浙江省的上升趋势较华东区域慢,为1.43μg·(m~3·a)~(-1).2007~2009年PM_(2.5)浓度达到最大,华东和浙江省超过35μg·m~(-3)的地区分别占到82.1%和65.9%.此后PM_(2.5)浓度呈现出下降的变化趋势,华东地区和浙江省的平均变化趋势分别为-1.75μg·(m~3·a)~(-1)和-1.58μg·(m~3·a)~(-1),PM_(2.5)浓度超过35μg·m~(-3)的地区比例均有所下降,说明政府颁布的一系列节能减排方针政策可能对华东地区的空气质量改善起到了一定的成效.2010年浙江地区PM_(2.5)暴露水平超过35μg·m~(-3)的人口比例和GDP比例分别为74.0%和70.8%,其中38.1%的人口生活的环境和38.9%的GDP产生的环境PM_(2.5)浓度年平均值在50μg·m~(-3)以上.     

从低能耗脱盐到资源回收的电容去离子技术在环境领域的研究进展

电容去离子（CDI）技术因具有高效、节能、环保、经济等优异性能,自20世纪60年代发明至今,一直得到研究者的广泛关注。在查阅资料的基础上,从理论研究、工程应用、材料研究3个方面介绍了CDI技术的发展历程,并分析了其理论原理、电化学反应过程、能耗与经济性,并从运行条件和电极优化2个方面对效率的优化提升进行了深入探讨,介绍了CDI技术装置国内外产业化应用情况,提出了CDI技术不仅在脱盐及污水处理领域具有较大发展空间,在环境废物资源化回收方面同样具有广阔的应用前景。     

Particulates and Metallic Elements Monitoring at Two Sampling Sites (Harbor,Airport) in Taiwan

This study characterized the dry deposition flux and dry deposition velocity (Vd) of metallic elements attached on particulate matter. Specifically, large particles (>10 μm), coarse particles (10 μm～2.5 μm), and fine particles (<2.5 μm) were studied at the Gong Ming Junior High School (Taichung Airport) and Taichung Harbor sampling sites in central Taiwan. Ambient air samples were collected to determine total suspended particulate matter (TSP), dry deposition plate (DDP), Vd, coarse particulate matter (PM_2.5–10) and fine particulate matter (PM_2.5), and metallic elements concentrations at the Airport and Taichung Harbor sites between June 17, 2013, and November 14, 2013. The results revealed that the average TSP, DDP, Vd, PM_2.5–10, and PM_2.5 particulate at the Airport were 54.55 (μg/m³), 902.25 (μg/m²-min), 17.11 (m/sec), 0.003 (μg/m³), and 0.010 (μg/m³), respectively; while these values at Taichung Harbor were 63.66 (μg/m³), 539.69 (μg/m²-min), 9.94 (m/sec), 0.003 (μg/m³), and 0.014 (μg/m³), respectively. In addition, the results showed that the average Cu and Pb concentrations were higher than Cr, Ni, and Cd for both the airport and harbor sampling sites. Furthermore, Cr, N, Cu, Cd, and Pb had the highest average concentrations versus those reported for other study areas, with one exception: The results obtained in Kacanik, Kosovo, during 2005. The average metallic elements concentrations order was Cu > Pb > Cr > Ni > Cd.     

Agricultural pesticide residues in farm ditches of the Lower Fraser Valley, British Columbia, Canada

Transient and permanent farm ditches flowing to the Lower Fraser River tributary fish streams of British Columbia, Canada, were sampled at several locations in 2003-2004 to determine the occurrence and concentration of residues of selected pesticides, their transformation products, and soluble/extractable Cu++ ions. Of the 43 compounds analyzed, 28 and 22 pesticides were detected in transient farm ditch water and sediments, respectively. About 34% fewer pesticides, however, were found in both matrices of permanent farm ditches. Average concentrations (microg L(-1)) of those most frequently detected in permanent farm ditch water were atrazine (0.20), alpha -chlordane (0.06), desethylatrazine (0.13), diazinon (0.55), dieldrin (0.28), endosulfan sulfate (0.16), glyphosate (6), metalaxyl (0.27); and soluble Cu++ ions (25). Those most often found in ditch sediments (microg kg(-1)) were aminomethylphosphonic acid (AMPA) (2,300), 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) (250), endosulfan sulfate (500), glyphosate (1,225); and extractable Cu++ ions (58,000). The risk potential of these pesticide residues to non-target aquatic organisms inhabiting Fraser River tributary fish streams contiguous to permanent farm ditches is evaluated and discussed.     

典型碳酸盐岩区耕地土壤剖面重金属形态迁移转化特征及生态风险评价

碳酸盐岩土壤母质区是我国耕地土壤重金属高含量的主要分布区,且耕地重金属迁移转化受到自然过程与人为活动的交互影响.以广西碳酸盐岩母质水田9条土壤剖面为研究对象,在分析测试土壤Cd、As、Zn、Cr、Cu、Hg、Ni和Pb含量、pH、Corg含量等土壤性质指标以及Cd、As、Zn和Cr赋存形态基础上,重点探讨了研究区耕地土...