The Characteristics of Tropospheric Ozone Seasonality Observed from Ozone Soundings at Pohang, Korea

This paper presents the first analysis of vertical ozone sounding measurements over Pohang, Korea. The main focus is to analyze the seasonal variation of vertical ozone profiles and determine the mechanisms controlling ozone seasonality. The maxima ozone at the surface and in the free troposphere are observed in May and June, respectively. In comparison with the ozone seasonality at Oki (near sea level) and Happo (altitude of 1840 m) in Japan, which are located at the same latitude as of Pohang, we have found that the time of the ozone maximum at the Japanese sites is always a month earlier than at Pohang. Analysis of the wind flow at the surface shows that the wind shifts from westerly to southerly in May over Japan, but in June over Pohang. However, this wind shift above boundary layer occurs a month later. This wind shift results in significantly smaller amounts of ozone because the southerly wind brings clean wet tropical air. It has been suggested that the spring ozone maximum in the lower troposphere is due to polluted air transported from China. However, an enhanced ozone amount over the free troposphere in June appears to have a different origin. A tongue-like structure in the time-height cross-section of ozone concentrations, which starts from the stratosphere and extends to the middle troposphere, suggests that the ozone enhancement occurs due to a gradual migration of ozone from the stratosphere. The high frequency of dry air with elevated ozone concentrations in the upper troposphere in June suggests that the air is transported from the stratosphere. HYSPLIT trajectory analysis supports the hypothesis that enhanced ozone in the free troposphere is not likely due to transport from sources of anthropogenic activity.     

Short-term Distributions of Reduced Sulfur Compounds in the Ambient Air Surrounding a Large Landfill Facility

In order to explore the environmental behavior of reduced sulfur compounds (RSC) as malodorous components emitted from diverse source processes, the distribution characteristics of four sulfur (S) compounds - hydrogen sulfide (H₂S), methyl mercaptan (CH₃SH), dimethyl sulfide (DMS: (CH₃)₂S), and dimethyl disulfide (DMDS: (CH₃)₂S₂) – were investigated in a municipal landfill area. In the course of this study, their ambient concentration levels were measured during two time periods from 13 individual spots selected as a function of distance from the center of the landfill site. The results generally indicated the absolute dominance of H₂S over the other S compounds investigated (up to 5 km radius) such that their mean values were found as 1415 (H₂S), 148 (DMS), 20.6 (CH₃SH), and 14.4 ppt (DMDS). When our data were compared in terms of either varying distance from the source or relationship with meteorological conditions, the H₂S data sets were most evident to reflect the potential effects of strong source processes in the landfill environment, relative to other S gases (or to volatile organic compounds measured concurrently). The results of this study further indicated the relatively good correspondence between the measured H₂S concentration level and humans' intuitive sensory of odor and nuisance.     

Development of a method for bacteria and virus recovery from heating, ventilation, and air conditioning (HVAC) filters

The aim of the work presented here is to study the effectiveness of building air handling units (AHUs) in serving as high volume sampling devices for airborne bacteria and viruses. An HVAC test facility constructed according to ASHRAE Standard 52.2-1999 was used for the controlled loading of HVAC filter media with aerosolized bacteria and virus. Nonpathogenic Bacillus subtilis var. niger was chosen as a surrogate for Bacillus anthracis. Three animal viruses; transmissible gastroenteritis virus (TGEV), avian pneumovirus (APV), and fowlpox virus were chosen as surrogates for three human viruses; SARS coronavirus, respiratory syncytial virus, and smallpox virus; respectively. These bacteria and viruses were nebulized in separate tests and injected into the test duct of the test facility upstream of a MERV 14 filter. SKC Biosamplers upstream and downstream of the test filter served as reference samplers. The collection efficiency of the filter media was calculated to be 96.5 +/- 1.5% for B. subtilis, however no collection efficiency was measured for the viruses as no live virus was ever recovered from the downstream samplers. Filter samples were cut from the test filter and eluted by hand-shaking. An extraction efficiency of 105 +/- 19% was calculated for B. subtilis. The viruses were extracted at much lower efficiencies (0.7-20%). Our results indicate that the airborne concentration of spore-forming bacteria in building AHUs may be determined by analyzing the material collected on HVAC filter media, however culture-based analytical techniques are impractical for virus recovery. Molecular-based identification techniques such as PCR could be used.     

Antibiotic Transport via Runoff and Soil Loss

Research has verified the occurrence of veterinary antibiotics in manure, agricultural fields, and surface water bodies, yet little research has evaluated antibiotic runoff from agricultural fields. The objective of this study was to evaluate the potential for agricultural runoff to contribute antibiotics to surface water bodies in a worst-case scenario. Our hypothesis was that there would be significant differences in antibiotic concentrations, partitioning of losses between runoff and sediment, and pseudo-partitioning coefficients (ratio of sediment concentration to runoff concentration) among antibiotics. An antibiotic solution including tetracycline (TC), chlortetracycline (CTC), sulfathiazole (STZ), sulfamethazine (SMZ), erythromycin (ERY), tylosin (TYL), and monensin (MNS) was sprayed on the soil surface 1 h before rainfall simulation (average intensity = 60 mm h(-1) for 1 h). Runoff samples were collected continuously and analyzed for aqueous and sediment antibiotic concentrations. MNS had the highest concentration in runoff, resulting in the highest absolute loss, although the amount of loss associated with sediment transport was <10%. ERY had the highest concentrations in sediment and had a relative loss associated with sediment >50%. TYL also had >50% relative loss associated with sediment, and its pseudo-partitioning coefficient (P-PC) was very high. The tetracyclines (TC and CTC) had very low aqueous concentrations and had the lowest absolute losses. If agricultural runoff is proven to result in development of resistance genes or toxicity to aquatic organisms, then erosion control practices could be used to reduce TC, ERY, and TYL losses leaving agricultural fields. Other methods will be needed to reduce transport of other antibiotics.     

Multi-Criteria Assessment of Tensions in Resource Use at Continental Scale: A Proof of Concept with Australian Rangelands

The purpose of this study was to help to inform policy development for the Australian rangelands, and provide a proof of concept for application of a multi-criteria analysis approach to assessment of competing resource use at continental scale. The study aimed to identify and locate key natural resource and agricultural production assets in the rangelands, define a number of measures of potentially threatening processes, and use a multi-criteria approach to identify areas where threatening processes, agricultural production problems, or valuable natural resources coincided. The analysis used 35 readily available, continental spatial data layers at 5-km pixel resolution ranked from 1 (low) to 5 (high) under three themed groupings: natural resource base, production base, and threatening processes. These measures were aggregated into composite indicators to define attributes such as environmental sensitivity and total grazing pressure. The composites were then compared in a two-way analysis to explore particular interactions between threatening processes such as pastoralism and mining, and the condition of production and natural resource assets. These interactions were defined as “tensions” for purposes of this analysis. Example “tensions” included the association of high grazing intensity with areas of high environmental sensitivity, indicating a risk of land degradation under adverse climatic conditions. A summary of patterns of tension was obtained by extracting area proportions of high-tension classes for selected Natural Heritage Trust Regions, which are a basis for Australian Government funding of improved environmental management. The study provides a basis for further examination of trade-offs in the use of natural assets, opportunities for improved productivity and sustainability, and social and economic implications.     

Preparation of a highly sensitive enzyme electrode using gold nanoparticles for measurement of pesticides at the ppt level

A highly sensitive enzyme electrode was prepared based on gold nanoparticles for measurement of pesticides. Gold nanoparticles of 25-30 nm were synthesized on a glassy carbon electrode by double-pulse technique while the coverage was controlled by applied potential and time. The gold nanoparticles were modified to form a self-assembled monolayer, followed by covalent binding of tyrosinase. The TYR-AuNP-GC electrode was compared with bare GC, AuNP-GC, and modified AuNP-GC and TYR-Au (plate type) electrodes in terms of cyclic voltammetry. The voltammograms well represent the sensitivity of enzymatic oxidation of catechol, substrates for the enzyme activity. The prepared electrode integrated into a continuous flow system and was tested to detect pesticides, such as 2,4-D, atrazine, and ziram. Under the optimized conditions of the flow system, the electrode performed reasonably according to the inhibition mechanism in the concentration range of 0.001-0.5 ng mL(-1). The enhanced performance was attributed to the favored microenvironment for the enzyme activity provided by SAM on gold nanoparticles.     

Assessment of Wastewater Reuse Effects on Nutrient Loads from Paddy Field Using Field-Scale Water Quality Model

CREAMS-PADDY, a modified version of the field-scale CREAMS model, simulates the hydrologic, sediment, and nutrient cycles in paddy fields. The CREAMS-PADDY model was applied to estimate the effects of using wastewater for irrigation on nutrient loads from paddy fields in Republic of Korea. The model was calibrated and validated using data from two rice paddy fields. The coefficient of determination between observed and simulated total nitrogen and total phosphorus were 0.92 and 0.57, respectively, for the calibration period and 0.84 and 0.73 for the validation period. Simulations showed that when using wastewater for irrigation, the total nitrogen loads increased by 210% and total phosphorus by 1,270% when compared with conventional water irrigation. The total nitrogen and total phosphorus concentration in the ponded water increased by 254 and 534%, respectively, when compared with conventional water irrigation. The effect of reducing N and P fertilizer application rates by 10, 30, and 50% on nutrient loads exiting a paddy field were also simulated using the validated CREAMS-PADDY model. These simulations indicated that total phosphorus loads from the paddy were reduced only slightly by reducing the fertilizer, while total nitrogen loads were reduced by as much as 8.8, 16.6, and 24.4% when N ferlitizer rates were reduced by 10, 30, and 50%, respectively. An erratum to this article can be found at     

Pesticide residues in soils, sediments, and vegetables in the Red River Delta, northern Vietnam

This study assessed pesticide residues in soils, sediments, and vegetables in the Xuan Khe and Hop Ly communes located along the Chau Giang River in the Red River Delta, northern Vietnam. Samples were collected from agricultural areas within and outside of embankments built to prevent flooding. In Xuan Khe, the soils outside of the embankment were more clayey with higher organic matter contents compared with the inside, due to selective deposition during river flooding. Many of the soils contained significant amounts of pesticides including dichlorodiphenyltrichloroethane (DDT), dicofol, isoprothiolane, and metalaxyl although their levels were below the maximum allowable concentration set by the Vietnamese government. The spectrum of DDT derivatives found suggested that the source of DDTs was not contaminated dicofol. Soils in Hop Ly resembled soils in Xuan Khe but were relatively sandy; one field showed appreciable contents of DDT derivatives. The ratios of (p,p ^′-dichlorodiphenyldichloroethylene + p,p ^′-dichlorodiphenyldichloroethane)/∑DDT in the surface and subsurface soils in Hop Ly were 0.34 and 0.57, suggesting that the DDTs originated from recent application. Pesticide residues in soils were not likely to translocate into vegetable crops, except for metalaxyl. High concentrations of cypermethrins in kohlrabi leaves could be ascribed to foliar deposition.     

Integrated assessment of brick kiln emission impacts on air quality

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35–12.3 kg of CO, 0.52–5.9 kg of SO₂ and 0.64–1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO₂ was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km² out of the 100-km² modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO₂, PM, CO, PM dry deposition flux) were assessed.     

Estimation of the rate of increase in nitrogen dioxide concentrations from power plant stacks using an imaging-DOAS

The emission of nitrogen compounds from power plants accounts for a significant proportion of the total emissions of nitrogen to the atmosphere. This study seeks to understand the nature of chemical reactions in the atmosphere involving nitrogen, which is important in undertaking quantitative assessments of the contribution of such reactions to local and regional air pollution. The slant column density (SCD) of power-plant-generated NO(2) was derived using imaging differential optical absorption spectroscopy (I-DOAS) with scattered sunlight as a light source. The vertical structure of NO(2) SCD from power plant stacks was simultaneously probed using a pushbroom sensor. Measured SCDs were converted to mixing ratios in calculating the rate of NO(2) increase at the center of the plume. This study presents quantitative measurements of the rate of NO(2) increase in a rising plume. An understanding of the rate of NO(2) increase is important because SO(2) and NO(x) compete for the same oxidizing radicals, and the amount of NO(x) is related to the rates of SO(2) oxidation and sulfate formation. This study is the first to directly obtain the rate of NO(2) increase in power plant plumes using the I-DOAS technique. NO(2) increase rates of 60 and 70 ppb s(-1) were observed at distances of about 45 m from the two stacks of the Pyeongtaek Power Plant, northwest South Korea.