A Simplified Dynamic Model for the Activated Sludge Process with High Strength Wastewaters

A simplified dynamic model for the activated sludge process with high-strength wastewaters is presented. The model is based on activated sludge models and predicts effluent chemical oxygen demand concentration using only four parameters. Experimental data for testing the model were obtained in an activated sludge plant using flax retting wastewater. The proposal of the model is described: mass balance to the system, selection of variables and behaviour of the theoretical values versus experimental results.     

Effects of dietary cadmium exposure on osmoregulation and urine concentration mechanisms of the semi-desert rodent Meriones shawi

Contamination by cadmium in the environment is of great concern because of its toxicity and threats to human and animal health. The current study was conducted to investigate the effects of a cadmium contaminated diet on the osmoregulation and urine concentration mechanisms of the semi-desert rodent Meriones shawi and eventual accumulation of this metal in vital organs such as the kidneys, which are directly implicated in water regulation. Originally, we used Differential Pulse Anodic Stripping Voltammetry (DPASV) to avoid the matrix interference due to the highly organic content in the biological samples. Our results show that Meriones shawi successfully maintained a homeostasis state and presented a special adaptation to regulate urine volume during cadmium exposure by decreasing diuresis and increasing urinary osmolality. The plasma osmolality and hematocrit remained constant throughout the experiment. The stripping signals of cadmium are linear up to 0.3-100 μg L(-1) range, with a detection limit of 0.28 μg L(-1). The DPASV technique was useful for easy, fast, selective and sensitive determination of Cd, which permits working at cellular concentration. This gives us more information about the chemical form in which Cd is introduced into the organ, as well as the intracellular Cd quantities. This study has potential importance if this valuable novel animal model, imitating human and animal environmental chronic exposure to Cd, could serve as an appropriate terrestrial biomonitor for Cd contaminated sites. These results are encouraging in the context of developing a low-cost and fast technology for the detection of pollutants and for studying the impairment caused by their effects.     

Kinetics of simazine advanced oxidation in water

Abstract

Comparison of the effects and kinetics of UV photolysis and four advanced oxidation systems (ozone, ozone/hydrogen peroxide, ozone/UV radiation and UV radiation/hydrogen peroxide) for the removal of simazine from water has been investigated. At the conditions applied, the order of reactivity was ozone < ozone/hydrogen peroxide < UV radiation < ozone/UV radiation and UV radiation/hydrogen peroxide. Rate constants of the reactions between ozone and simazine and hydroxyl radical and simazine were found to be 8.7 M^‐1s^‐1 and 2.1x10⁹ M^‐1s^‐1, respectively. Also, a quantum yield of 0.06 mol.photon^‐1 was found for simazine at 254 nm UV radiation. The high value of the quantum yield corroborated the importance of the direct photolysis process. Percentage contributions of direct reaction with ozone, reaction with hydroxyl radicals and direct photolysis were also quantified.     

Understanding deforestation in montane and lowland forests of the Colombian Andes

Colombian Andean forests cover nine million ha. These forests provide an informative case study of mountain deforestation in South America. They are surrounded by tropical lowland forests, and they host most of the country’s human population. This study evaluates the relative importance of human and natural variables in deforestation of the Colombian Andes between 1985 and 2005 using remote sensing methods, geographic information system (GIS) technology and general linear models (GLM). The following factors affected the annual deforestation in the region positively: forced population migration, unsatisfied basic needs, economic activity, crops, pastures, illicit crops, protected areas and slope. Factors having a negative effect were tenure of small land parcels, road density, water scarcity and mean temperature. The results of this study also provide insight into the differences between the dynamics of lowland forests and those of montane forests. Montane forests had a lower annual rate of deforestation than did forests in the lowlands. Socio-economic, demographic and biophysical factors explain overall deforestation rates for the region. However, when altitude variation is taken into account, intraregional differences in the Andes become evident. Deforestation processes differ between those areas adjacent to the high Andean valleys where most of the country’s population concentrates and those areas in the tropical lowlands north, west and east of the Andean chain. Differences between lowland and montane forest dynamics are due partly to the accessibility of forests and differences in wealth and economic activities. In montane forests, deforestation is positively influenced by economic activity, the presence of protected areas and higher slopes. Deforestation in montane forests is negatively affected by tenure of small land parcels, road density, water scarcity and mean temperature. Lowland deforestation rates are more closely related to rural population, pasture percentage, crops, protected areas and temperature. Our results suggest that montane forests appear to be in a more advanced stage of colonisation and economic development, whereas lowland forests are closer to the colonisation frontier and to rapidly growing colonist populations. This study reinforces the idea that although the most common tropical drivers of deforestation are found in the Andes, these drivers operate differently when intraregional differences are considered.     

Influence of RFID tags on recyclability of plastic packaging

The use of Radio Frequency IDentification Technology (RFID) in the packaging sector is an important logistical improvement regarding the advantages offered by this technology in comparison with barcodes. Nevertheless, the presence of these devices in plastic packaging, and consequently in plastic waste, can cause several problems in the recycling plants due to the materials included in these devices.In this study, the mentioned recycling constraints have been experimentally identified in a pilot scale recycling study consisting in three recycling tests with an increasing presence of RFID tags. Differences in each test were evaluated. Furthermore, the quality of the recycled material of each test was studied through the injection and testing of tests probes.The results of the pilot scale recycling tests did not show a decrease in the quality of the recycled plastic due to the presence of RFID tags. Nevertheless, several operational problems during the recycling process were observed such as the obstruction of the screens, which lessened the process yield and created process interruptions, as well as the loss of extruded plastic during the process.These recycling constraints cannot be directly extrapolated to the industrial plants due to the different working scales. Nevertheless, technological solutions are proposed in order to avoid these recycling constraints if they appear.     

A Methodology for the Evaluation of Water Policies in European Countries

Periodic assessment of progress toward established policy goals is crucial to understanding whether the applied efforts are effective. In Europe, the Water Framework Directive (WFD) adopted in year 2000 set ambitious environmental objectives to be achieved by the end of 2015 through the implementation of Integrated Water Resources Management (IWRM) principles. While at this stage it is premature to measure the impact of this Directive in terms of environmental outcomes, it is nonetheless important to develop indicators in order to monitor whether water management practices throughout Europe are aligning towards IWRM. This article presents the methodological development of the Water and Wetland Index, a comparative water policy assessment by environmental NGOs that was carried out in 2002–2003, and highlights the interest of repeating it in 2015, when the first WFD planning cycle will be completed.     

Spatial configuration of land-use/land-cover in the Pujal-Coy project area, Huasteca Potosina region, Mexico

This article analyzes the relationship between the configuration and spatial reorganization of land-use and land-cover in the Pujal-Coy project area, Huasteca Potosina region, eastern San Luis Potosí, Mexico, as well as the relationship between these changes and the environmental conditions prevailing in the area. Land-use and land-cover changes were determined through the analysis and interpretation of satellite images from different dates. The changes identified in the different study periods were correlated with the prevailing physical factors. The results show that the spatial configuration of farming activities, initially induced by the implementation of a regional development project, is highly correlated to the presence of limiting factors such as soil type, slope, and climate. Particularly, the former represents the element that has led to the establishment of the current distribution pattern of farming activities.     

Performance evaluation of a biotrickling filter treating a mixture of oxygenated VOCs during intermittent loading

Laboratory scale-studies on the biodegradation of a 1:1:1 weight mixture of three oxygenated volatile organic compounds (VOCs), ethanol, ethyl acetate, and methyl-ethyl ketone (MEK) in a biotrickling filter (BTF) were carried out using two identically sized columns, filled with different polypropylene rings. The performance of the BTFs was examined for a period of 10 months applying several operational strategies. Similar performance was obtained for both supports. Intermittent flow rate of trickling liquid was shown beneficial to improve the removal efficiency (RE). Continuous feeding of VOC resulted in an excessive accumulation of biomass so high pressure drop was developed in less than 20-30 d of operation. Intermittent VOC loading with night and weekend feed cut-off periods passing dry air, but without addition of water, was shown as a successful operational mode to control the thickness of the biofilm. In this case, operation at high inlet loads (ILs) was extended for more than 75 d maintaining high REs and low pressure drops. Outlet emission concentrations lower than 100 mg Cm(-3) were obtained for ILs up to 100 g Cm(-3)h(-1) working at 15s of empty bed residence time. The most easily biodegradable compounds ethanol and ethyl acetate were used primarily than MEK. After a 3-wk-starvation period, the system performance was almost restored since the first d of operation, being the removal of the less biodegradable compound, MEK, partially deteriorated.     

Fungal biofilters for toluene biofiltration: evaluation of the performance with four packing materials under different operating conditions

Packing materials play a key role in the performance of bioreactors for waste gas treatment and particularly in biofilter applications. In this work, the performance of four differently packed biofilters operated in parallel for the treatment of relatively high inlet concentration of toluene was studied. The reactors were compared for determining the suitability of coconut fiber, digested sludge compost from a waste water treatment plant, peat and pine leaves as packing materials for biofiltration of toluene. A deep characterisation of materials was carried out. Biological activity and packing capabilities related to toluene removal were determined throughout 240 days of operation under different conditions of nutrients addition and watering regime. Also, biofilters recovering after a short shutdown was investigated. Nutrient addition resulted in improved removal efficiencies (RE) and elimination capacities (EC) of biofilters reaching maximum ECs between 75 and 95 g m(-3)h(-1) of toluene. In the first 80 days, the pH decreased progressively within the reactors, causing a population change from bacteria to fungi, which were the predominant decontaminant microorganisms thereafter. All reactors were found to recover the RE rapidly after a 5 days shutdown and, in a maximum of 7 days, all reactors had been completely recuperated. These results point out that fungal biofilters are a suitable choice to treat high loads of toluene. In general, coconut fiber and compost biofilters exhibited a better performance in terms of elimination capacity and long-term stability.