生物法降解养殖场臭气中H2S的反应器启动

畜禽养殖场臭气成分复杂,完全去除较为困难。生物法是目前应用较广泛的脱臭方法,其中能否将生物膜附着在填料上是影响生物法去除恶臭气体效率的重要因素。本实验采用定时定量投加Na2S的方式驯化活性污泥,并选用MLSS浓度和SO42-浓度增量变化2个指标作为污泥驯化成熟的指标,比传统的以MLSS作为污泥驯化成熟的指标更准确。采用循环污泥的挂膜方式,运行2 d后,通入新鲜的空气和H2S气体,2周后反应器启动成功。     

Citrobacter sp.CK3对活性红KN-3B的脱色反应动力学研究

采用脱色菌Citrobacter sp. CK3,以活性红KN-3B染料为处理对象,在厌氧批式反应条件下,系统考察了pH值,温度和染料浓度对脱色反应速度的影响;通过动力学模拟及反应过程中染料的UV-Vis扫描图分析,探讨了脱色反应机理。结果表明:Citrobacter sp. CK3对活性红KN-3B的脱色反应的适宜pH为7～9;脱色反应速度在温度为32℃时达到最大。染料初浓度从57 mg/L逐渐增大到458 mg/L时脱色率逐渐降低。脱色过程中染料的偶氮键发生断裂,脱色反应符合二级反应动力学。     

Catalytic Activity of Biomorphic α-MoO(3) in the Degradation of Methyl Violet Dye

A network of fibers comprising orthorhombic molybdenum trioxide (α-MoO(3)) crystals were synthesized using paper as template via a biomorphic approach. The template was completely removed by annealing the sample at 600°C for 5?min. Monoclinic MoO(3) was formed and consequently converted into orthorhombic α-MoO(3) after prolonged annealing. Three milligrams of the biomorphic α-MoO(3) could degrade up to 90% of a methyl violet aqueous solution with a concentration of 20?mg/L under normal visible light. The size of the α-MoO(3) grains and the porosity of the biomorphic sample affected catalytic performance.     

Effects of Land Use Changes on the Ecosystem Service Values of a Reclamation Farm in Northeast China

Intensive agricultural development can change land use, which can further affect regional ecosystem services and functions. With the rapid growth of the population and the national demand for food, the northeast of China, which is located in the high latitudes, has experienced four agricultural developments since the 1950s. The original wetlands of this area were developed for farmland. The evaluation of ecosystem services is conducted to reveal the ecosystem status and variable trends caused by land reclamation. The aim of this study is to provide scientific basis for environmental management and for the sustainable development of agriculture in Northeast China. With GIS-RS technology, a typical farm was chosen to analyze variations in the ecosystem service value in response to land use changes during the study period. The total ecosystem service value of the farm decreased from 7523.10 million Yuan in 1979 to 4023.59 million Yuan in 2009 with an annual rate of ?1.6?% due to the decreasing areas of woodland and wetland. The increased areas of cropland, water area and grassland partly offset the loss of the total value, but the loss was still greater than the compensation. Waste treatment and climate regulation were the top two service functions with high service values, contributing to approximately 50?% of the total service value. The spatial difference of the ecosystem service value also was analyzed. The wetlands located in the central and northeastern sections of the farm changed significantly. From the aspect of ecosystem service value, the wetland and water area should be conserved, as they have the highest value coefficients. The accuracy of the value coefficient, however, needs to be studied further in future research.     

Importance of sulfate reducing bacteria in mercury methylation and demethylation in periphyton from Bolivian Amazon region

Sulfate reducing bacteria (SRB) are important mercury methylators in sediments, but information on mercury methylators in other compartments is ambiguous. To investigate SRB involvement in methylation in Amazonian periphyton, the relationship between Hg methylation potential and SRB (Desulfobacteraceae, Desulfobulbaceae and Desulfovibrionaceae) abundance in Eichhornia crassipes and Polygonum densiflorum root associated periphyton was examined. Periphyton subsamples of each macrophyte were amended with electron donors (lactate, acetate and propionate) or inhibitors (molybdate) of sulfate reduction to create differences in SRB subgroup abundance, which was measured by quantitative real-time PCR with primers specific for the 16S rRNA gene. Mercury methylation and demethylation potentials were determined by a stable isotope tracer technique using ²⁰⁰HgCl and CH₃²⁰²HgCl, respectively. Relative abundance of Desulfobacteraceae (<0.01-12.5%) and Desulfovibrionaceae (0.01-6.8%) were both highly variable among samples and subsamples, but a significant linear relationship (p < 0.05) was found between Desulfobacteraceae abundance and net methylmercury formation among treatments of the same macrophyte periphyton and among all P. densiflorum samples, suggesting that Desulfobacteraceae bacteria are the most important mercury methylators among SRB families. Yet, molybdate only partially inhibited mercury methylation potentials, suggesting the involvement of other microorganisms as well. The response of net methylmercury production to the different electron donors and molybdate was highly variable (3-1104 pg g⁻¹ in 12 h) among samples, as was the net formation in control samples (17-164 pg g⁻¹ in 12 h). This demonstrates the importance of community variability and complexity of microbial interactions for the overall methylmercury production in periphyton and their response to external stimulus.     

Phosphorus use-efficiency of agriculture and food system in the US

The rapid increase in human mobilization of phosphorus has raised concerns on both its supply security and its impact on the environment. Increasing the efficiency of phosphorus use is an approach to mitigate the adverse impacts associated with phosphorus consumption. This study estimates the life-cycle phosphorus use-efficiency of the US food system. A framework for accounting phosphorus stocks and flows is developed, and the account was populated with data. A map of phosphorus stocks and flows around the US food system is drawn and phosphorus use-efficiency was calculated. The results show that only 15% of the total phosphorus extracted from nature for the provision of food is eventually ingested by humans and the rest is lost to the environment. Major losses occur during the livestock, meat and dairy production and crop cultivation stage, where about 66% of the total phosphorus extracted is lost to the environment. The results also show that other losses of phosphorus including household food waste, mining waste, and fertilizer manufacturing waste are not negligible, which constitute about 19% of the total phosphorus extracted for food purpose. A data quality assessment and sensitivity analysis was performed to identify data quality hotspots and to envisage effective measures to improving phosphorus use-efficiency. Improving yields of livestock and crop cultivation without additional phosphorus input and reducing household food waste are shown to be effective measures to improve life-cycle phosphorus use-efficiency. The results highlight the need of a concerted effort by all entities along the life-cycle for efficient use of phosphorus.     

Enhancement of Tensile Strength and Flexibility of Polycaprolactone/Tapioca Starch Blends by Octadecylamine Modified Clay

Polycaprolactone/tapioca starch/octadecylamine modified clay (OMMT) nanocomposites were successfully prepared by melt blending. X-ray diffraction and transmission electron microscopy (TEM) of the products showed that they are nanocomposites of a mixture intercalated and exfoliated types. In addition, the TEM also revealed that the OMMT layers are homogeneously distributed in the polymer matrix. The presence of 1 php of OMMT improved the compatibility of the polymers in the blends which consequently increased the tensile strength of the blend of more than 60% and elongation at break of more than 1,000%.     

Adsorption Characteristics of Benzene on Biosolid Adsorbent and Commercial Activated Carbons

Abstract

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl₂) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl₂-immersed biosolids pyrolyzed at 500 °C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

Arsenic, copper, and zinc contamination in soil and wheat during coal mining, with assessment of health risks for the inhabitants of Huaibei, China

Field studies were conducted to investigate arsenic (As), copper (Cu), and zinc (Zn) contamination in agricultural soils and wheat crops at two areas in Huaibei, China. Area A is in the proximity of Shuoli coal mine. In area B, three coal mines and a coal cleaning plant were distributed. The potential health risk of As, Cu, and Zn exposure to the local inhabitants through consumption of wheat grains was also estimated. The results showed that significantly higher (p?<?0.05) concentrations of As, Cu, and Zn were found in soils collected from area B than in those from area A. Arsenic concentrations in wheat sampled from area A were negatively correlated with the distance from the coal mine (p?<?0.001). Concentrations of Cu and Zn in wheat seedlings and grains collected from area B were significantly higher (p?<?0.05) than in those collected from area A, with the exception of Zn in wheat seedlings. Concentrations of Cu and Zn in most wheat grain samples were above the permissible limits of Cu and Zn in edible plants set by the Food and Agriculture Organization/World Health Organization. The hazard index of aggregate risk through consumption of wheat grains was 2.3–2.4 for rural inhabitants and 1.4–1.5 for urban inhabitants. The average intake of inorganic As for rural inhabitants in Huaibei was above 10 μg day^?1. These findings indicated that the inhabitants around the coal mine are experiencing a significant potential health risk due to the consumption of locally grown wheat.     

Performance Characteristics of PM10 Samplers under Calm Air Conditions

ABSTRACT

The size range of airborne particles that is closely related to specific deposition regions in the human respiratory tract and excess lung burden of these deposited particles is associated with disease. Size-selective sampling, therefore, needs to be performed to assess the related health risks. Performance criteria applied to these samplers must be well characterized in order to provide accurate and reliable results. The PM₁₀ samplers that have been used in place of the total suspended particulate samplers for the collection of ambient air particles are more relevant to potential inhalation hazards. In order to be certified, a PM₁₀ sampler must meet reliable performance specifications, primarily the aerosol penetration test with liquid and solid particles in a wind tunnel (wind speeds of 2, 8, and 24 km/hr). This testing is intended to assure reasonable accuracy in aerosol measurements. However, the sampler performance under calm air conditions has not been well studied.

In the present study, the sampling heads of three devices—the Harvard impactor, the Personal Environmental Monitor (PEM), and the Sierra Andersen model 241 dichotomous sampler PM₁₀ inlet head—were tested for aerosol separation efficiency. With the consideration of bias and imprecision of the measurements, five specimens of each type of sampler were chosen for performance testing, repeating the tests 5 times for each specimen. An ultrasonic atomizing nozzle was used to nebulize potassium sodium tartrate tetrahydrate and dioctyl phthalate particles as the solid and liquid challenge aerosols, respectively. The aerosol number concentrations and size distributions upstream and downstream of the samplers were measured by using an aerosizer calibrated against a settling velocity chamber. The results showed that among the samplers tested, the dichotomous sampler PM₁₀ inlet head had the best fit to the PM₁₀ convention, while the other two samplers not only appeared to have a steeper separation-curve slope but also had significant particle bounce when challenged with solid particles. Analysis of variance also confirmed the superiority of the dichotomous samplers. Surface-coating with oil or grease greatly reduced the problem of particle bounce.