Photocatalytic degradation of p-nitrophenol using biologically synthesized ZnO nanoparticles

Environmental Science and Pollution Research - The present work deals with the photocatalytic degradation of p-nitrophenol as it is a United States Environmental Protection Agency-listed priority...     

Roadmap to sustainable carbon-neutral energy and environment: can we cross the barrier of biomass productivity?

Environmental Science and Pollution Research - The total number of inhabitants on the Earth is estimated to cross a record number of 9 × 103 million by 2050 that present a unique challenge to...     

Ground water quality in the Kathmandu valley of Nepal

A study was undertaken to assess the quality of groundwaters in the Kathmandu Valley, Nepal. The groundwater samples were randomly collected from shallow well, tube well, and deep-tube wells located at different places of Kathmandu, Lalitpur, and Bhaktapur districts in the Kathmandu valley. Physical, chemical, and microbiological parameters of the samples were evaluated to estimate the groundwater quality for drinking water. It was found that the groundwater in the valley is vulnerable to drink due to presence of iron and coliform bacteria. Iron was estimated to be much higher then the acceptable limit of World Health Organization (WHO) drinking-water quality guidelines (1.9 mg/L). Total coliform bacteria enumerated in groundwaters significantly exceeded the drinking-water quality standard and observed maximum coliform (267 CFU/100 mL) in shallow wells. The electrical conductivity and turbidity were found to be 875 ??S/cm and 55 NTU, respectively, which are above the WHO recommendations for drinking water guidelines. However, pH value was measured within the acceptable limit. Arsenic, chloride, fluoride, and hardness concentrations were found to be in agreement with the recommendations of WHO drinking-water quality guidelines.     

Co-benefits of a carbon tax in Nepal

This paper analyzes the co-benefits of introducing a time variant carbon (C) tax scheme in Nepal, a hydropower resourceful country, by using a bottom up integrated energy system model based on the MARKet ALlocation (MARKAL) framework with time horizon of 2005–2050. It discusses the effects of C tax on energy mix, environmental emissions, energy supply security, energy efficiency, energy system cost, and employment benefit. The study shows that the C tax (that gradually increases from US13/tCO < sub > 2 < /sub > e in 2015 to US 13/tCO₂e in 2015 to US 200/tCO₂e by 2050) results in a reduction of the cumulative emission of greenhouse gases by 83.9 million tons CO₂e (12%) as compared to that in the base case. With the introduction of the C tax, there would be a need for additional hydropower capacity of 945 MW by 2050 as compared to the capacity in the base case. The emission of local pollutants consisting of sulphur dioxide (SO₂), nitrogen oxides (NO_x) and non-methane volatile organic compound (NMVOC) in 2050 would be reduced by 12%, 7% and 1% respectively under the C tax scenario. Total amount of imported energy would decrease by 13%, which corresponds to a reduction in discounted net fuel import cost by 5% during the study period. Furthermore, the C tax would result in new employment generation of 151 thousand man-years associated with the additional hydropower capacity requirement.     

Occurrence,transformation, bioaccumulation,risk and analysis of pharmaceutical and personal care products from wastewater: a review

Almost all aspects of society from food security to disease control and prevention have benefited from pharmaceutical and personal care products, yet these products are a major source of contamination that ends up in wastewater and ecosystems. This issue has been sharply accentuated during the coronavirus disease pandemic 2019 (COVID-19) due to the higher use of disinfectants and other products. Here we review pharmaceutical and personal care products with focus on their occurrence in the environment, detection, risk, and removal.

     

Efficient arsenic depollution in water using modified maize powder

This article reports the synthesis of an efficient, low-cost material from maize powder to depollute arsenic-contaminated water. Arsenic is toxic for humans and other organisms even at low concentrations. The most well-known and severe case of arsenic poisoning through drinking water has been found in India and Bangladesh. Numerous inorganic materials have been tested for the removal of arsenic from water bodies over the last two decades. However, all such materials have several disadvantages such as unpredictable arsenic ion removal, high cost and the generation of toxic sludge that is often more difficult to manage. Alternatively, organic material from agricultural waste may be modified to enrich functional groups responsible for As sorption and, in turn, used to depollute contaminated waters. Here, Zea mays cob powder has been modified to remove arsenic species from water. Two modified materials were produced: an aminated maize powder and a thiolated maize powder. Amination was done using epichlorohydrin and dimethylamine. Thiolation was done using thioglycolic acids. Amination increased As (III) sorption from 70 to 75.8 % and As (V) sorption from 85 to 94.42 %, compared with unmodified maize powder. Thiolation increased As (III) sorption from 70 to 81.7 % and As (V) sorption from 85 to 90 %. Amination increased usability cycles from 3 to 5. Thiolation increased usability cycles from 3 to 6. The novel modified maize biosorbent has enough potential for the development of a low-cost technological pre-treatment step, prior to high-tech chemical treatments.     

Leaching studies for tin recovery from waste e-scrap

Printed circuit boards (PCBs) are the most essential components of all electrical and electronic equipments, which contain noteworthy quantity of metals, some of which are toxic to life and all of which are valuable resources. Therefore, recycling of PCBs is necessary for the safe disposal/utilization of these metals. Present paper is a part of developing Indo-Korean recycling technique consists of organic swelling pre-treatment technique for the liberation of thin layer of metallic sheet and the treatment of epoxy resin to remove/recover toxic soldering material. To optimize the parameters required for recovery of tin from waste PCBs, initially the bench scale studies were carried out using fresh solder (containing 52.6% Sn and 47.3% Pb) varying the acid concentration, temperature, mixing time and pulp density. The experimental data indicate that 95.79% of tin was leached out from solder material using 5.5M HCl at fixed pulp density 50g/L and temperature 90°C in mixing time 165min. Kinetic studies followed the chemical reaction controlled dense constant size cylindrical particles with activation energy of 117.68kJ/mol. However, 97.79% of tin was found to be leached out from solder materials of liberated swelled epoxy resin using 4.5M HCl at 90°C, mixing time 60min and pulp density 50g/L. From the leach liquor of solder materials of epoxy resin, the precipitate of sodium stannate as value added product was obtained at pH 1.9. The Pb from the leach residue was removed by using 0.1M nitric acid at 90°C in mixing time 45min and pulp density 10g/L. The metal free epoxy resin could be disposed-of safely/used as filling material without affecting the environment.     

Mechanical and Dynamic Mechanical Analysis of Woven Banana/Epoxy Composite

In this work, three types of woven (Plain, twill and Basket) composites are made of banana fibers/epoxy resin using hand-layup method. Mechanical properties (tensile, flexural and impact) of three types of woven composites are compared to evaluate the effect of weaving architecture on the properties. Dynamic Mechanical Analysis is carried out to analyse the visco-elastic behavior of the composite. Dynamic Mechanical Analysis is carried out in the temperature range of 40?C140?°C at 0.1,1,10?Hz frequencies. Scanning Electron Microscopic analysis is carried out to investigate the fracture behaviour of the composite. From the investigation it is found that plain type of woven composite has better mechanical and dynamic mechanical behaviour.     

Synthesis and pesticidal activity of new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines

A series of novel N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were synthesized as potential new agents to control pests. Their structures were confirmed on the basis of IR, NMR and elemental analyses. Six new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were prepared by reduction of corresponding Schiff bases using sodium borohydride in 80–87 % yields. These compounds were tested for their antifungal activity against two pathogenic fungi viz., Rhizoctonia bataticola ITCC 0482 and Sclerotium rolfsii ITCC 5226 and for insecticidal activity against insects of stored grain pest Callosobruchus analis. Fungicidal bioassay revealed that compound N-Decyl-N-[1-(2-hydroxyphenyl)ethyl]amine, was highly effective against R. bataticola (ED₅₀ 6.86 mg L^?1) which was comparable with that of commercial fungicide hexaconazole (ED₅₀ 6.35 mg L^?1). Also compounds N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine, N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine and N-Nonyl-N-[1-(2-hydroxyphenyl)ethyl]amine displayed promising fungitoxicity against same pathogen. However, compound N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine was also found to be effective against S. rolfsii (ED₅₀ 4.92 mg L^?1 as against 1.27 mg L^?1 for hexaconazole). Compound N-Hexyl-N-[1-(2-hydroxyphenyl)ethyl]amine was most effective as insecticide followed by compound N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine. LC₅₀ values for these compounds were 155.0 and 275.0 mg L^?1 respectively as against 36.70 mg L^?1 for commercial insecticide dichlorovos. The results obtained from bioassays indicate that this class of compounds can be utilized for the design of new substances endowed with pesticidal activities.     

Monitoring changes in soil organic carbon pools, nitrogen, phosphorus, and sulfur under different agricultural management practices in the tropics

Soil organic matter not only affects sustainability of agricultural ecosystems, but also extremely important in maintaining overall quality of environment as soil contains a significant part of global carbon stock. Hence, we attempted to assess the influence of different tillage and nutrient management practices on various stabilized and active soil organic carbon pools, and their contribution to the extractable nitrogen phosphorus and sulfur. Our study confined to the assessment of impact of agricultural management practices on the soil organic carbon pools and extractable nutrients under three important cropping systems, viz. soybean–wheat, maize–wheat, and rice–wheat. Results indicated that there was marginal improvement in Walkley and Black content in soil under integrated and organic nutrient management treatments in soybean–wheat, maize–wheat, and rice–wheat after completion of four cropping cycles. Improvement in stabilized pools of soil organic carbon (SOC) was not proportional to the applied amount of organic manures. While, labile pools of SOC were increased with the increase in amount of added manures. Apparently, green manure (Sesbania) was more effective in enhancing the lability of SOC as compared to farmyard manure and crop residues. The KMnO₄-oxidizable SOC proved to be more sensitive and consistent as an index of labile pool of SOC compared to microbial biomass carbon. Under different cropping sequences, labile fractions of soil organic carbon exerted consistent positive effect on the extractable nitrogen, phosphorus, and sulfur in soil.