Effect of water treatment residuals on soil phosphorus, copper and aluminium availability and toxicity

Water treatment residuals (WTRs) are produced by the treatment of potable water with coagulating agents. Beneficial recycling in agriculture is hampered by the fact that WTRs contain potentially toxic contaminants (e.g. copper and aluminium) and they bind phosphorus strongly. These issues were investigated using a plant bioassay (Lactuca sativa), chemical extractions and an isotopic dilution technique. Two WTRs were applied to an acidic and a neutral pH soil at six rates. Reductions in plant growth in amended soils were due to WTR-induced P deficiency, rather than Al or Cu toxicity. The release of potentially toxic Al from WTRs was found to be mitigated by their alkaline nature and pH buffering capacity. However, acidification of WTRs was shown to release more soluble Al than soil naturally high in Al. Copper availability was relatively low in all treatments. However, the lability of WTR-Cu increased when the WTR was applied to the soil.     

Consequences of nitrate leaching following stem-only harvesting of Swedish forests are dependent on spatial scale

Short-term increases in soil solution nitrate (NO₃⁻) concentration are often observed after forest harvest, even in N-limited systems. We model NO₃⁻ leaching below the rooting zone as a function of site productivity. Using national forest inventories and published estimates of N attenuation in rivers and the riparian zone, we estimate effects of stem-only harvesting on NO₃⁻ leaching to groundwater, surface waters and the marine environment. Stem-only harvesting is a minor contributor to NO₃⁻ pollution of Swedish waters. Effects in surface waters are rapidly diluted downstream, but can be locally important for shallow well-waters as well as for the total amount of N reaching the sea. Harvesting adds approximately 8 Gg NO₃-N to soil waters in Sweden, with local concentrations up to 7 mg NO₃-N l⁻¹. Of that, ∼3.3 Gg reaches the marine environment. This is ∼3% of the overall Swedish N load to the Baltic.     

Determination of the insecticide diflubenzuron in mushrooms by kinetic method and high-performance liquid chromatographic method

In the present study, a new sensitive and simple kinetic-spectrophotometric method for the determination of the insecticide diflubenzuron [1-(4-chlorophenyl)-3-(2,6-diflubenzoil)urea] is proposed. The method is based on the inhibited effect of diflubenzuron on the oxidation of sulphanilic acid (SA) by hydrogen peroxide in phosphate buffer in presence Cu(II) ion. Diflubenzuron was determined with linear calibration graph in the interval from 0.31 to 3.1 μg mL?1 and from 3.1 to 31.0 μg mL?1. The optimized conditions yielded a theoretical detection limit of 0.18 μg mL?1 corresponding to 0.036 mg kg(-1)mushroom sample based on the 3S(b) criterion. The RSD is 5.03-1.83 % and 2.81-0.71 % for the concentration interval of diflubenzuron 0.31-3.1 μg mL?1 and 3.1-31.0 μg mL?1, respectively. The reaction was followed spectrophotometrically at 370 nm. The kinetic parameters of the reaction are reported, and the rate equations are suggested. The developed procedure was successfully applied to the rapid determination of diflubenzuron in spiked mushroom samples of different mushroom species. The HPLC method was used like a comparative method to verify results.     

Use of native mosses as biomonitors of heavy metals and nitrogen deposition in the surroundings of two steel works

A biomonitoring survey using the moss species Hypnum cupressiforme Hedw. was conducted in the surroundings of two steel plants located in the North of Spain. Levels of V, Cr, Ni, Cu, Zn, As, Cd, Hg, Pb and N were determined. Very high concentrations in the areas of study were detected when compared to nearby unaffected regions. Similar trends were observed for all the elements in the differently orientated transects, showing an appreciable influence of the NW prevailing winds of the region in the dispersion of pollutants, as well as a clear decreasing gradient in the concentrations of metals in mosses within a distance of 1500 meters from the facilities. A differentiation between the elements emitted by the chimney as result of the industrial activity (V, Cr, Ni, Cu and As) and those with a high presence in steel slag deposits (Zn, Cd, Hg and Pb) was observed. The range of contamination was also established by means of the Contamination Factor, indicating a category 4 out of 6 categories, which shows the high levels reported in the areas of study. A different dynamic was registered for nitrogen regarding the rest of the heavy metals analysed except for Hg, probably due to the elevated volatility and mobility of both elements, as well as their high persistence in the atmosphere.     

Extensive aerosol optical properties and aerosol mass related measurements during TRAMP/TexAQS 2006 – Implications for PM compliance and planning

Extensive aerosol optical properties, particle size distributions, and Aerodyne quadrupole aerosol mass spectrometer measurements collected during TRAMP/TexAQS 2006 were examined in light of collocated meteorological and chemical measurements. Much of the evident variability in the observed aerosol-related air quality is due to changing synoptic meteorological situations that direct emissions from various sources to the TRAMP site near the center of the Houston-Galveston-Brazoria (HGB) metropolitan area. In this study, five distinct long-term periods have been identified. During each of these periods, observed aerosol properties have implications that are of interest to environmental quality management agencies. During three of the periods, long range transport (LRT), both intra-continental and intercontinental, appears to have played an important role in producing the observed aerosol. During late August 2006, southerly winds brought super-micron Saharan dust and sea salt to the HGB area, adding mass to fine particulate matter (PM_2.5) measurements, but apparently not affecting secondary particle growth or gas-phase air pollution. A second type of LRT was associated with northerly winds in early September 2006 and with increased ozone and sub-micron particulate matter in the HGB area. Later in the study, LRT of emissions from wildfires appeared to increase the abundance of absorbing aerosols (and carbon monoxide and other chemical tracers) in the HGB area. However, the greatest impacts on Houston PM_2.5 air quality are caused by periods with low-wind-speed sea breeze circulation or winds that directly transport pollutants from major industrial areas, i.e., the Houston Ship Channel, into the city center.     

Use of CALPUFF for exposure assessment in a near-field,complex terrain setting

CALPUFF is an atmospheric source-receptor model recommended by the U.S. Environmental Protection Agency for use on a case-by-case basis in complex terrain and wind conditions. The ability of the model to provide useful information for exposure assessments in areas with those topographical and meteorological conditions has received little attention. This is an important knowledge gap for use of CALPUFF outside of regulatory applications, such as exposure analyses conducted in support of risk assessments and health studies. We compared deposition of cadmium (Cd), lead (Pb), and zinc (Zn) calculated with CALPUFF as a result of emissions from a zinc smelter with corresponding concentrations of the metals measured in attic dust and soil samples obtained from the surrounding area. On a point-by-point analysis, predictions from CALPUFF explained 11% (lead) to 53% (zinc) of the variability in concentrations measured in attic dust. Levels of heavy metals in soil interpolated to 100 residential addresses from the distribution of concentrations measured in soil samples also agreed well with deposition predicted with CALPUFF: R² of 0.46, 0.76, and 079 for Pb, Cd, and Zn, respectively. Community-average concentrations of Cd, Pb, and Zn measured in soil were significantly (p < 0.0001) and strongly correlated (R² ranged from 0.77 to 0.98) with predicted deposition rates. These findings demonstrate that CALPUFF can provide reasonably accurate predictions of the patterns of long-term air pollutant deposition in the near-field associated with emissions from a discrete source in complex terrain. Because deposition estimates are calculated as a linear function of air concentrations, CALPUFF is expected to be reliable model for prediction of long-term average, near-field ambient air concentrations in complex terrain as well.     

On-road traffic emissions in a megacity

A new annual bottom–up emission inventory of criteria pollutants and greenhouse gases from on-road mobile sources was developed for 2006 for the metropolitan area of Buenos Aires, Argentina, within a four-year regional project aimed at providing tools for chemical weather forecast in South America. Under the scarcity of local emission factors, we collected data from measuring campaigns performed in Argentina, Brazil, Chile and Colombia and compiled a data set of regional emission factors representative of Latin American fleets and driving conditions. The estimated emissions were validated with respect to downscaled national estimates and the EDGAR global emission database. Our results highlight the role of older technologies accounting in average for almost 80% of the emissions of all species. The area exhibits higher specific emissions than developed countries, with figures two times higher for criteria pollutants. We analyzed the effect on emissions of replacing gasoline by compressed natural gas, occurring in Argentina since 1995. We identified (i) a relationship between number of vehicles and a compound socioeconomic indicator, and (ii) time-lags in vehicle technologies between developed and developing countries, which can be respectively applied for spatial disaggregation and the development of projections for other Latin American cities. The results may also be employed to complement global emission inventories and by local policy makers as an environmental management tool.     

WRF-Chem simulation of East Asian air quality: Sensitivity to temporal and vertical emissions distributions

This study develops fine temporal (seasonal, day-of-week, diurnal) and vertical allocations of anthropogenic emissions for the TRACE-P inventory and evaluates their impacts on the East Asian air quality prediction using WRF-Chem simulations in July 2001 at 30-km grid spacing against available surface measurements from EANET and NEMCC. For NO₂ and SO₂, the diurnal and vertical redistributions of emissions play essential roles, while the day-of-week variation is less important. When all incorporated, WRF-Chem best simulates observations of surface NO₂ and SO₂ concentrations, while using the default emissions produces the worst result. The sensitivity is especially large over major cities and industrial areas, where surface NO₂ and SO₂ concentrations are reduced by respectively 3–7 and 6–12 ppbv when using the scaled emissions. The incorporation of all the three redistributions of emissions simulates surface O₃ concentrations higher by 4–8 ppbv at night and 2–4 ppbv in daytime over broad areas of northern, eastern and central China. To this sensitivity, the diurnal redistribution contributes more than the other two.     

Global scale emission and distribution of sea-spray aerosol: Sea-salt and organic enrichment

The chemical composition of marine aerosols as a function of their size is an important parameter for the evaluation of their impact on the global climate system. In this work we model fine particle organic matter emitted by sea spray processes and its influence on the aerosol chemical properties at the global scale using the off-line global Chemistry-Transport Model TM5. TM5 is coupled to a microphysical aerosol dynamics model providing size resolved information on particle masses and numbers. The mass of the emitted sea spray particles is partitioned between water insoluble organic matter (WIOM) and sea salt components in the accumulation mode using a function that relates the emitted organic fraction to the surface ocean chlorophyll-a concentrations. The global emission in the sub-micron size range of organic matter by sea spray process is 8.2 Tg yr^?1, compared to 24 Tg fine yr^?1 sea-salt emissions. When the marine sources are included, the concentrations of modelled primary particulate organic matter (POM) increase mainly over the oceans. The model predictions of WIOM and sea salt are evaluated against measurements carried out at Mace Head (Northern Hemisphere) and Amsterdam Island (Southern Hemisphere), showing that in clean marine conditions WIOM marine emissions contribute significantly to POM values.     

Contribution of residential wood combustion to PM10 levels in Portugal

Wood is commonly used in residential combustion for heating purposes; however, it can be a major source of air pollutants, namely fine particles, volatile organic compounds and carbon monoxide. Since 2004, the PM10 daily limit value has been surpassed in Portugal, and the European Commission has stated that plans and programs must be designed in order to reduce these levels. In Portugal, 18% of PM10 emissions are due to residential wood combustion, which may deeply impact the PM10 levels in the atmosphere. The main aim of this study is to investigate the impact of residential wood combustion on the air quality in Portugal. The air quality modelling system MM5/CHIMERE was applied over Portugal for a winter month, for the following three scenarios: the reference scenario, considering the actual emissions of PM10; scenario 1, where residential wood combustion emissions are not considered; and scenario 2, which takes into account a complete conversion from traditional fireplaces to certified appliances (with a 90% reduction in PM emissions). The residential wood combustion contribution to PM10 air quality concentration values during January 2007 ranges from 0 to 14 μg m^?3, with a mean contribution of 10 μg m^?3 in the Lisboa area and 6 μg m^?3 in the Porto region. Concerning the legislated values, the area where the daily average limit value (50 μg m^?3) is exceeded decreases by 46% in the simulation when residential combustion is not considered. The modelling results for scenario 2 are not significantly different from those for scenario 1. In summary, the regulation of the residential wood combustion sector is as an effective way to reduce the PM10 levels in the atmosphere as regards air quality plans and programs.