A microcomputer-based emergency response system*

A microcomputer-based system was developed to provide local officials responsible for disaster management with assistance during the crucial period immediately following a disaster, a period when incorrect decisions could have an adverse impact on the surrounding community.
While the paper focuses on a potential disaster resulting from an accident at a commercial nuclear power generating facility, the system can be applied to other disastrous situations. Decisions involving evacuation, shelter and the deployment of resources must be made in response to floods, earthquakes, accidents in the transportation of hazardous materials, and hurricanes to name a few examples.
As a decision aid, the system was designed to enhance data display by presenting the data in the form of representations (i.e. road maps, evacuation routes, etc.) as well as in list or tabular form. The potential impact of the event (i.e. the release of radioactive material) was displayed in the form of a cloud, representing the dispersion of the radioactive material. In addition, an algorithm was developed to assist the manager in assigning response resources to demands.
The capability for modelling the impact of a disaster is discussed briefly, with reference to a system installed in the communities surrounding the Indian Point nuclear power plant in New York State.
Results demonstrate both the technical feasibility of incorporating microcomputers indecision support systems for radiological emergency response, and the acceptance of such systems by those public officials responsible for implementing the response plans.     

Comparison of three sampling and analytical methods for the determination of airborne hexavalent chromium

A field study was conducted with the goal of comparing the performance of three recently developed or modified sampling and analytical methods for the determination of airborne hexavalent chromium (Cr(VI)). The study was carried out in a hard chrome electroplating facility and in a jet engine manufacturing facility where airborne Cr(VI) was expected to be present. The analytical methods evaluated included two laboratory-based procedures (OSHA Method ID-215 and NIOSH Method 7605) and a field-portable method (NIOSH Method 7703). These three methods employ an identical sampling methodology: collection of Cr(VI)-containing aerosol on a polyvinyl chloride (PVC) filter housed in a sampling cassette, which is connected to a personal sampling pump calibrated at an appropriate flow rate. The basis of the analytical methods for all three methods involves extraction of the PVC filter in alkaline buffer solution, chemical isolation of the Cr(VI) ion, complexation of the Cr(VI) ion with 1,5-diphenylcarbazide, and spectrometric measurement of the violet chromium diphenylcarbazone complex at 540 nm. However, there are notable specific differences within the sample preparation procedures used in three methods. To assess the comparability of the three measurement protocols, a total of 20 side-by-side air samples were collected, equally divided between a chromic acid electroplating operation and a spray paint operation where water soluble forms of Cr(VI) were used. A range of Cr(VI) concentrations from 0.6 to 960 microg m(-3), with Cr(VI) mass loadings ranging from 0.4 to 32 microg, was measured at the two operations. The equivalence of the means of the log-transformed Cr(VI) concentrations obtained from the different analytical methods was compared. Based on analysis of variance (ANOVA) results, no statistically significant differences were observed between mean values measured using each of the three methods. Small but statistically significant differences were observed between results obtained from performance evaluation samples for the NIOSH field method and the OSHA laboratory method.     

Including past and present impacts in cumulative impact assessments

Environmental concerns such as loss of biological diversity and stratospheric ozone depletion have heightened awareness of the need to assess cumulative impacts in environmental documents. More than 20 years of experience with the National Environmental Policy Act (NEPA) have provided analysts in the United States with opportunities for developing successful techniques to assess site-specific impacts of proposed actions. Methods for analyzing a proposed action's incremental contribution to cumulative impacts are generally less advanced than those for project-specific impacts.The President's Council on Environmental Quality (CEQ) defines cumulative impact to include the impacts of past, present and reasonably foreseeable future actions regardless of who undertakes the action. Court decisions have helped clarify the distinction between reasonably foreseeable future actions and other possible future actions. This paper seeks to clarify how past and present impacts should be included in cumulative impact analyses.The definition of cumulative impacts implies that cumulative impact analyses should include the effects of all past and present actions on a particular resource. Including past and present impacts in cumulative impact assessments increases the likelihood of identifying significant impacts. NEPA requires agencies to give more consideration to alternatives and mitigation and to provide more opportunities for public involvement for actions that would have significant impacts than for actions that would not cause or contribute to significant impacts. For an action that would contribute to significant cumulative impacts, the additional cost and effort involved in increased consideration of alternatives and mitigation and in additional public involvement may be avoided if the action can be modified so that its contributions to significant cumulative impacts are eliminated.Managed by Lockheed Martin Energy Research Corporation under contract DE-AC05-84OR21400 with the US Department of Energy.     

Continuous monitoring of ultrafine,fine, and coarse particles in a residence for 18 months in 1999-2000

Continuous monitors were employed for 18 months in an occupied townhouse to measure ultrafine, fine, and coarse particles; air change rates; wind speed and direction; temperature; and relative humidity (RH). A main objective was to document short-term and long-term variation in indoor air concentrations of size-resolved particles (0.01-20 microm) caused by (1) diumal and seasonal variation of outdoor air concentrations and meteorological variables, (2) indoor sources such as cooking and using candles, and (3) activities affecting air change rates such as opening windows and using fans. A second objective was to test and compare available instruments for their suitability in providing real-time estimates of particle levels and ancillary variables. Despite different measuring principles, the instruments employed in this study agreed reasonably well for particles less than 10 microm in diameter. The three instruments measuring fine and coarse particles (aerodynamic diameter between 0.3 and 20 microm) agreed to within 30% in their overall estimates of total volume. Two of these instruments employed optical scattering, and the third used an aerodynamic acceleration principle. However, several lines of evidence indicated that the instrument employing aerodynamic acceleration overestimated concentrations for particle diameters greater than 10 microm. A fourth instrument measuring ultrafine and accumulation-mode particles (0.01-1 microm) was operated with two different inlets providing somewhat different particle size ranges. The two inlets agreed in the ultrafine region (< 0.1 microm) but diverged increasingly for larger particles (up to 0.445 microm). Indoor sources affecting ultrafine particle concentrations were observed 22% of the time, and sources affecting fine and coarse particle concentrations were observed 12 and 15% of the time, respectively. When an indoor source was operating, particle concentrations for different sizes ranged from 2 to 20 times the average concentrations when no indoor source was apparent. Indoor sources, such as cooking with natural gas, and simple physical activities, such as walking, accounted for a majority (50-90%) of the ultrafine and coarse particle concentrations, whereas outdoor sources were more important for accumulation-mode particles between 0.1 and 1 microm in diameter. Averaged for the entire year and including no periods when indoor sources were apparent, the number distribution was bimodal, with a peak at approximately 10 nm (possibly smaller), a shallow minimum at approximately 14 nm, and a second broad peak at approximately 68 nm. The volume distribution was also bimodal, with a broad peak at approximately 200 nm, a minimum at approximately 1.2 microm, and then an upward slope again through the remaining size fractions. A database was created on a 5-min averaging time basis. It contains more than 90,000 measurements by two of the instruments and approximately 30,000 by the two optical scattering instruments. About 4500 hour-long average air change rates were also calculated throughout the year using a dedicated gas chromatograph with electron capture detection (GC/ECD). At high air change rates [> 0.8 air changes per hour (hr(-1))], particle concentrations were either elevated (when no source was present) or depressed (when an indoor source was operating) by factors of up to 2 compared with low air change rates.     

Synchronous spawnings of 105 scleractinian coral species on the Great Barrier Reef

Following observations of mass spawning of hermatypic corals on the Great Barrier Reef in 1981 and 1982, spawning dates were successfully predicted and documented at five reefs on the Central and Northern Great Barrier Reef in 1983. During the predicted times, 105 species from 36 genera and 11 families were observed to spawn. Of these, 15 species were shown to have an annual gametogenic cycle. All but two of the species observed during mass spawnings shed gametes which underwent external fertilization and development. Synchronous spawning was observed both within and between the five reefs studied, which were separated by as much as 5° of latitude (500 km) or almost a quarter of the length of the Great Barrier Reef. The mass spawning of corals took place on only a few nights of the year, between the full and lastquarter moon in late spring. Maturation of gametes coincided with rapidly rising spring sea temperatures. Lunar and diel cycles may provide cues for the synchronization of gamete release in these species. The hour and night on which the greatest number of species and individuals spawned coincided with low-amplitude tides. Multispecific synchronous spawning, or mass spawning, of scleractinian and some alcyonacean corals represents a phenomenon which is, so far, unique in both marine and terrestrial communities.     

Design,management, and key accomplishments of a coordinated environmental research program on acidic deposition

The present and potential adverse effects of the atmospheric input of acidic and acidifying substances on the environment have been of significant public and scientific concern for the past several decades. This article describes the background, design, implementation, and major accomplishments of a 6-yr integrated multidisciplinary environmental research program designed to address the issue of the regional scale consequences of acidic deposition on the environment and human health in Alberta. The research program was called the Acid Deposition Research Program (ADRP) and was a cooperative undertaking between industry, the Energy Resources Conservation Board, and the government of Alberta, Canada. The research effort was designed and guided by two external science advisory boards, biophysical and human health, to maintain objectivity and continuity from beginning to end. Public input was sought, encouraged, and ensured by a public advisory board. The major conclusions of the ADRP are presented as well as observations on the needs of future integrated multidisciplinary research programs.     

Analysis of potential impacts to resident fish from Columbia River System Operation alternatives

The US Army Corps of Engineers, the US Bureau of Reclamation, and the Bonneville Power Administration initiated the Columbia River System Operation Review (SOR) in 1990. The SOR will assist agencies in comparing the benefits and risks to Columbia River uses and natural resources from alternative strategies for using Columbia River water. Focusing on 14 federal dams within the basin, the agencies are attempting to improve on the efficient and coordinated use of the Columbia River system. An initial screening of all potential strategies of reservoir operation was necessary to reduce the number of possibilities to a limited set for detailed analysis. To that end, the Resident Fish Work Group of the SOR developed spreadsheet models capable of assessing the impacts of different management strategies on resident fish at six storage reservoirs. The models include biological, physical, and hydrological relationships important to resident fish specific to each reservoir. Alternatives that kept the reservoirs near full pool and held stable during the growing season resulted in positive benefits to resident fish at all locations modeled. Conversely, alternatives designed to improve anadromous fish survival with increased instream flow generally had a negative impact on the resident fish in the reservoirs modeled. The models developed for resident fish in the screening analysis phase of the SOR were useful in assessing the relative impact to resident fish from a large number of alternatives. The screening analysis demonstrated that future analytical efforts must consider trade-offs among river uses/resource groups, among reservoirs throughout the basin, and among resident fish species within a reservoir.Pacific Northwest Laboratory is operated by Battelle Memorial Institute for the US Department of Energy under contract DE-AC06-76RLO 1830.     

Influence of emergence success on the annual reproductive output of leatherback turtles

Reproductive output of leatherback turtles (Dermochelys coriacea) is affected by the stochastic nature of emergence success. Average emergence success of nests at Playa Grande, Costa Rica was 0.38 ± 0.27. Incubation temperature affected development of leatherback turtle eggs and emergence of hatchlings from the nest. We found that high temperatures reduced hatching success and emergence rate and increased embryonic mortality both early and late during incubation at Playa Grande. There was a temporal effect on emergence success that resulted in more hatchlings being produced at the beginning of the season, because of higher emergence success, than toward the end. Likewise, production of hatchlings varied from year to year. The average annual reproductive output was 252 ± 141 hatchlings per female. The 2005–2006 nesting season had the highest emergence success and produced the greatest number of hatchlings per female compared to the 2004–2005 (+120%) and 2006–2007 (+41%) seasons. However, average clutch size (62 ± 10) and clutch frequency (9.45 ± 1.63), were not different among years. Turtles that had nested a high number of years exhibited greater clutch frequency and arrived earlier to nest than turtles that had nested in fewer numbers of years. Nesting when environmental conditions favor high developmental success and emergence rate may constitute an advantageous reproductive strategy.     

Removal of metal ions from aqueous solution by chelating polymeric hydrogel

Polysaccharide natural seed coat from the tree Magonia pubescens, in the form of hydrogel was used to remove metals in aqueous solution. Swelling tests indicate that seed coat presents hydrogel behavior, with maximum water absorption of 292 g water/g. Adsorption experiments performed using Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Fe³⁺ and Zn²⁺ demonstrated that the polysaccharide structure has a high capacity to extract these ions from the aqueous solution. Scanning electron microscopy revealed significant morphological changes of the material before and after water contact. Differential scanning calorimetry measurements indicate a signal shift of the water evaporation temperature in the material with adsorbed zinc. X-ray photoelectron spectroscopy analysis combined with theoretical studies by the density functional theory and on Hartree–Fock (HF) level evidence that the metallic ions were adsorbed through coordination with hydroxyl groups of polysaccharide. In the case of Zn²⁺ the lowest HF energy was observed for the tetracoordination mode, where Zn²⁺ is coordinated by two hydroxyl groups and two water molecules.