Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

Olfactory and chemical characterization of indoor air. Towards a psychophysical model for air quality

The relationship between the odor strength of total air samples and the odor strengths of the constituents was investigated in three field experiments in an office building and a new preschool. The odor strength was scaled by magnitude estimation according to a master scale principle which results in comparable values for the total and the constituent odors. Between 60 and 120 chemical components were detected by GC/FID in the indoor air samples (N = 66). Most (81%) of the detected components in an air sample were odorous, even though most of them were of the low concentrations. By a method of pattern analysis, chemical as well as odor patterns of indoor air were found to be characteristics of different buildings. From the odor patterns (POG), the “odor print” of the outdoor air associated with the buildings was also recognized in the indoor air. Thus, the “odor print” of an air sample is different from its “chemical print”. A model was found that predicts the overall odor strength of an air sample from the number of FID-detected components most frequently reported to have a strong odor.     

空调压缩机冷媒爆炸反应特征分析

冷媒与空气的反应特征对空调压缩机安全性有重要影响.本文采用最小自由能原理,分别对两种冷媒R407C和R410A与空气的混合气体的爆炸反应参数进行了数值计算,得到了不同初始压力和不同冷媒含量条件下,混合气体爆炸反应温度和压力,分析了混合气体反应压力条件和爆炸极限范围.结果表明:初始压力低于0.2 MPa时,R407C-空气混合气体和R410A-空气混合气体均不会发生爆炸;初始压力超过0.3 MPa时,混合气体能够发生爆炸,爆炸反应温度和压力随着初始压力的升高而升高;R407C和R410A质量分数分别在34%、35%左右,混合气体反应温度和压力达到最大值.R407C和R410A易燃易爆特征相近;但爆炸范围都比氟利昂(R22)气体宽,即同样的条件下更容易发生爆炸.该计算结果能够为新型冷媒R407C和R410A的安全使用提供一定的依据.     

Freshwater lakes--a potential source for aquaculture activities--a model study on Perumal Lake, Cuddalore, Tamil Nadu

The freshwater Perumal lake located at Cuddalore was assessed for its suitability and potential for aquaculture practices. Various hydrobiological parameters determined reveals that the various physicochemical characteristics are with in normal range of values. The DO level, BOD and COD values determined in the lake revealed the consequences of community activities and pollution possibilities. The primary productivity data revealed maximum productivity during March which infer that the lake is unaffected by anthropogenic disturbance and community contamination. The bacterial count remained higher during the monsoon periods, which characterize profuse rainfall and storm water discharge into the lake. The microfauna includes zooplankter such as cladocerans, copepods, rotifers and ostracods. Benthos include carps, catfishes, mullets and prawns. The above study revealed that the various parameters in the lake conform to the levels suited for freshwater fish culture and represents a resource for scientific management.     

Choosy males from the underground: male mating preferences in surface- and cave-dwelling Atlantic mollies (Poecilia mexicana)

Atlantic mollies (Poecilia mexicana) inhabit a variety of surface habitats, but they also occur in a sulfur cave in southern Mexico. We examined male mate choice relative to female body size in the cave population and in the most closely related surface-dwelling population from a nearby river. Males from both populations were either light- or dark-reared and could choose between two differently sized females either on the basis of visual cues in light or on the basis of solely nonvisual cues in darkness. Sexual preferences were estimated from the degree of association. Cave molly males always showed a preference for the larger female, both in light and in darkness. Among the surface males, only light-reared males showed a preference in the visual cues test, but not in darkness. In a control experiment, we demonstrated that male association preferences directly translate into actual mating preferences. Apparently, using visual cues for mate choice is the ancestral state in this system, and using nonvisual cues has evolved as a novel trait in the cave population. We discuss the evolution of nonvisual male mate choice in the context of changed environmental conditions, namely the absence of light, hypoxia, and toxic hydrogen sulfide in the cave.