Part based process performance monitoring (PbPPM)

The performances of completed manufacturing processes were evaluated using the surface response to excitation (SuRE) and Lamb wave methods. Both methods used the same piezoelectric elements attached to the surface of the workpiece. The SuRE method and the Lamb wave method were used to identify the structural changes created by welding, drilling, coating, filling a slot with glue, and composite patching. This study indicates that the tested methods are feasible for part based process performance monitoring (PbPPM) which evaluates the quality of the completed process with the sensors attached to the workpiece.     

Job satisfaction among physicians in secondary and tertiary medical care levels

Environmental Science and Pollution Research - To identify level of job satisfaction among physicians at secondary and tertiary care levels. Random sample of 450 secondary and 523 tertiary care...     

Evaluation of hydroxyapatite/poly(acrylamide-acrylic acid) for sorptive removal of strontium ions from aqueous solution

Environmental Science and Pollution Research - A composite polymer, hydroxyapatite/poly(acrylamide-acrylic acid), was synthesized by gamma-induced polymerization. The factors affecting the sorption...     

An experimental study on the effect of mobile phone conversation on drivers' reaction time in braking response

Introduction

This paper presents an experimental study in which the effect of three factors (distance between cars, mobile call duration, and time of driving (day or night)) on drivers' reaction time in braking response was investigated.

Methods

The experiment was performed in a real driving environment in which 27 male adults between the ages of 22 and 24 years participated. Three levels of the first two factors (i.e., distance between cars and call duration) and two levels of the last factor (i.e., time of driving) were selected to conduct the experimental study. A full factorial design of experiment with 18 treatment combinations and three replicates of each combination were used. Fifty-four trial runs were performed in a random manner and for each run drivers' reaction time in braking response was measured, which served the data for further analysis. Analysis of variance (ANOVA), interaction effect analysis, and various model adequacy tests were carried out using Design Expert software.

Results

The results of the study indicated that the most important factor affecting the drivers' reaction time in car braking response was the mobile call duration followed by the time of driving, with a high level of interaction between the two factors. It was also found that the distance between cars did not seem to have a significant effect on the reaction time in braking response. It is to be noted that these response times are expected to be higher under normal driving conditions where awareness of experimental environment is not present.

Impact on Industry

The findings of this study would help mobile phone industries in improving safety of mobile phone users in driving environment.     

Monitoring urban growth and detecting land-cover changes on the Istanbul metropolitan area

Istanbul is the most populated city of Turkey with a population of around 10.58 M (2000) living on around 5,750 km². In 1980, the population was only 4.7 M and then it has been more than doubled in only two decades. The population has been increasing as a result of mass immigration. An urbanization process continues and it causes serious increases in urban areas while decreasing the amount of green areas. This rapid, uncontrolled, and illegal urbanization accompanied by insufficient infrastructure has caused degradation of forest and barren lands in the metropolitan area, especially through the last two decades. The watershed basins inside the metropolitan area and the transportation network have accelerated the land-cover changes, which have negative impacts on water quality of the basins. Monitoring urban growth and land cover change will enable better management of this complex urban area by the Greater Istanbul Metropolitan Municipality (GIMM). A temporal assessment of land-cover changes of Istanbul has been documented in this study. The study mainly focuses on the acquisition and analysis of Landsat TM and Landsat GeoCover LC satellite images reflecting the significant land-cover changes between the years of 1990 and 2005. Raster data were converted to vector data and used in Geographic Information Systems (GIS). A database was created for Istanbul metropolitan area to plan, manage, and utilize statistical attribute data covering population, water, forest, industry, and topographic position. Consequently an overlay analysis was carried out and land use/cover changes through years have been detected for the case study area. The capability of Landsat images in determining the alterations in the macro form of the city are also discussed.     

Use of selected waste materials in concrete mixes

A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This study tackles the problem of the waste that is generated from construction fields, such as demolished concrete, glass, and plastic. In order to dispose of or at least reduce the accumulation of certain kinds of waste, it has been suggested to reuse some of these waste materials to substitute a percentage of the primary materials used in the ordinary portland cement concrete (OPC). The waste materials considered to be recycled in this study consist of glass, plastics, and demolished concrete. Such recycling not only helps conserve natural resources, but also helps solve a growing waste disposal crisis. Ground plastics and glass were used to replace up to 20% of fine aggregates in concrete mixes, while crushed concrete was used to replace up to 20% of coarse aggregates. To evaluate these replacements on the properties of the OPC mixes, a number of laboratory tests were carried out. These tests included workability, unit weight, compressive strength, flexural strength, and indirect tensile strength (splitting). The main findings of this investigation revealed that the three types of waste materials could be reused successfully as partial substitutes for sand or coarse aggregates in concrete mixtures.     

Reevaluation of ENCORE: support for the eutrophication threshold model for coral reefs

The results from the multimillion dollar Enrichment of Nutrients on Coral Reefs Experiment (ENCORE) on One Tree Island Reef (OTIR) suggest that increased nutrient loads to coral reefs will have little or no effect on the algal growth rates and, hence, on the associated effects that increased algal growth might have on the functioning and stability of coral reefs. However, a comparison of the concentrations of nutrients within the OTIR lagoon with the proposed nutrient threshold concentrations (NTC) for coral reefs suggests that all sites, including the control sites, were saturated with nutrients during ENCORE, and, hence, one would not expect to get any differences between treatments in the algal-growth related measurements. Thus, ENCORE results provide strong support for the proposed NTCs and support the ecological principle that algal productivity and, consequently, the functioning of coral reefs are sensitive to small changes in the background concentrations of nutrients. The principal conclusion of ENCORE, namely that the addition of nutrients did not cause the "pristine" OTIR to convert from coral communities to algal dominated reefs, is contrary to the fact that there was prolific macroalgal growth on the walls and crests of the experimental microatolls by the end of ENCORE.     

Thermally enhanced approaches for bioremediation of hydrocarbon-contaminated soils

Successful remediation of contaminated soils is often limited by the low bioavailability of hydrophobic pollutants, which may slow the process significantly. In this study we investigated the benefits of high temperature in enhancing hydrocarbon degradation rates and evaluated the effect of different biostimulants. Hexadecane polluted soil microcosms with various amendments were incubated both at 60 degrees C and room temperature (18 degrees C) and analyzed periodically up to 40d for the degradation of hydrocarbon and the response of the microbial population. Natural attenuation showed a satisfactory intrinsic degradative capability at 60 degrees C and the addition of inorganic N, P and K increased the degradation rates by 10%. The addition of rhamnolipid biosurfactant further enhanced the bioavailability of alkane to microbial degradation resulting in up to 71% removal at 60 degrees C and 42% at 18 degrees C. Significant input to hexadecane degradation occurred at 60 degrees C (70%) as a result of the bioaugmentation with thermophilic Geobacillus thermoleovorans T80, which did not take place at 18 degrees C. Coupling high temperature to all amendments resulted in 90% removal of the hexadecane from soil after 40d which was also accompanied with an increase in bacterial numbers. The results suggest that thermally enhanced bioremediation may be an efficient technology for the treatment of hydrocarbon-contaminated soils.     

Seasonal baseline of nutrients and stable isotopes in a saline lake of Argentina: biogeochemical processes and river runoff effects

The seasonal variability of inorganic and organic nutrients and stable isotopes and their relations with plankton and environmental conditions were monitored in Lake Chasicó. Principal component analysis evidenced the strong influence of the river runoff on several biogeochemical variables. Silicate concentrations were controlled by diatom biomass and river discharge. Higher values of nitrate and soluble reactive phosphorus (SRP) indicated agricultural uses in the river basin. Elevated pH values (～9) inhibiting nitrification in the lake explained partially the dominance of ammonium: ～83 % of dissolved inorganic nitrogen (DIN). The low DIN/SRP ratio inferred nitrogen limitation, although the hypotheses of iron and CO₂ limitation are relevant in alkaline lakes. Particulate organic matter (POM) and dissolved organic matter (DOM) were mainly of autochthonous origin. The main allochthonous input was imported by the river as POM owning to the arid conditions. Dissolved organic carbon was likely top-down regulated by the bacterioplankton grazer Brachionus plicatilis. The δ¹³C signature was a good indicator of primary production and its values were influenced probably by CO₂ limitation. The δ¹⁵N did not evidence nitrogen fixation and suggested the effects of anthropogenic activities. The preservation of a good water quality in the lake is crucial for resource management.