Autochthonous clams monitoring of Ganzirri Lake (Sicily)

Two autochthonous clams, Venerupis aurea laeta and Cerastoderma edule/glaucum, collected for a period of 1 year, from May 2007 to January 2008, were studied in the Cape Peloro lagoon. On the samples, it was evaluated the presence of pathogenic microorganisms and proteins, lipids and yield edible part were determined. It was evaluated the concentration of mineral elements (Cd, Cu, Mn, Se, Pb, Zn) and organic contaminants (∑DDT and PCBs). Salmonella is never present in any sample. Total and faecal coliform values have always been under law limits for alive bivalves mussels production and sale. Zn, Cu, Cd and Pb levels were found in clams where they are slightly lower too. Both species do not show significant changes for Mn and Se. DDT and PCBs traces were discovered in Ganzirri Lake’ samples, but in all observed cases, they were below law limits. As a result of all these observations, it is clear that, in recent years, the bivalve’s use of Ganzirri Lake does not denote toxicological risk to human health.     

The trace element content of top-soil and wild edible mushroom samples collected in Tuscany, Italy

The amount of the trace elements As, Ba, Cd, Cr, Cu, Hg, Li, Mn, Ni, Pb, Rb, Se, Sr, and Zn was measured in top soils and edible mushrooms, Boletus edulis, Macrolepiota procera, collected at five distinct green microhabitats inside the Lucca province, North-Central Italy (years 2008–2009). Results showed a top soil element content within the Italian statutory limits. Concerning the amount of mushroom elements, we observed significant species-differences obtaining higher levels of Ni, Rb, and Se in B. edulis or As, Pb, Cu in M. procera. Bioaccumulation factors (BCFs: element in mushroom/element in soil) resulted species-dependent and element-selective: in particular, B. edulis preferentially accumulated Se (BCFs varying from 14 to 153), while M. procera mainly concentrated Cu (BCFs varying from 5 to 15). As well, both species displayed between-site BCF differences. By a multivariate principal component approach, cluster analysis (CA), we could resolve two main clusters of soil element composition, corresponding to the most ecologically divergent sites. Besides, CA showed no cluster relating to element contents of B. edulis at the different collection sites, while a separation in groups was found for M. procera composition with respect to harvesting locations, suggesting uptake systems, in this saprotrophic species, sensitive to microhabitat. Regarding consumer safety, Cd, Hg, Pb levels resulted sometime relevant in present samples, never reaching values from current literature on mushrooms collected in urban-polluted areas. Our findings encourage a deeper assessment of the molecular mechanisms of metal intake by edible mushrooms, encompassing genetic biochemical and geo-ecological variables, with particular awareness to element bioavailability in soils and fungi.     

Seasonal dynamics of Vibrio cholerae and its phages in riverine ecosystem of Gangetic West Bengal: cholera paradigm

The Gangetic delta is a century-old cholera endemic belt where the role of riverine–estuarine ecosystem in cholera transmission has never been elucidated. Seasonality, distribution, and abundance of environmental Vibrio cholerae O1/O139 and vibriophage in Hooghly riverine–estuarine environment and their correlation with cholera incidence pattern in West Bengal, India, have been analyzed for the first time across summer, monsoon, and winter months. A total of 146 water samples collected from two sites of the Hooghly River (Howrah and Diamond Harbour) were analyzed physicochemically along with cultivable Vibrio count (CVC), V. cholerae O1/O139, and vibriophages. V. cholerae O1 was detected in 56 (38.3 %) samples, while 66 (45.2 %) were positive for V. cholerae O1 phages. Flood tide, water temperature (31?±?1.6 °C), and turbidity (≥250 nephelometric turbidity unit (NTU)) significantly stimulated V. cholerae and vibriophage abundance in riverine ecosystem. Solitary existence of V. cholerae O1 and phages (p?V. cholerae O1 or V. cholerae O1 Φ) on the other. Significant association (p?V. cholerae O1 in aquatic environment implies the role of riverine–estuarine ecosystem in cholera transmission. A “biomonitoring tool” of physicochemical stimulants, tidal, and climatic variants has been proposed collating V. cholerae and phage dynamics that can forewarn any impending cholera outbreak.     

Speciation of inorganic arsenic in coastal seawater from Ionian and Tyrrhenian Seas (Sicily, Italy) using derivative anodic stripping chronopotentiometry

The purpose of this paper was to use derivative anodic stripping chronopotentiometry (dASCP) as a sensitive and accurate technique, to determine the concentrations of dissolved As (III) and As (V) in coastal seawater samples from the Straits of Messina, the Ionian and the Tyrrhenian seas, and to investigate the relationship between the anthropogenic activities on the coastal areas and the concentration of dissolved inorganic arsenic in seawaters. The obtained data indicated that As (V) was the most abundant species, with concentration ranging from 26.7 to 307 nM, whereas As (III) levels were lower than 48 nM in all the samples. In particular, As (III) and As (V) levels significantly decreased from high to low anthropogenic activities zones (p < 0.00001, ANOVA), with the reference samples, from a wildlife reserve, showing the lowest values. Furthermore it was observed that human activities influenced inorganic arsenic speciation, since the zones that received high human input presented the highest As(V)/As (III) ratio.     

Selected Ion Chromatograms and Tandem Mass Spectrometry for Detection of Trace Polycyclic Aromatic Hydrocarbons in Diesel Exhaust

Abstract

Polycyclic aromatic hydrocarbon (PAH) measurements are essential for scientists and engineers who investigate these anthropogenic compounds. Diesel engines contribute to the problem, so analysts are measuring PAHs from these sources. However, diesel exhaust presents special problems for precise analytical measurements. The exhaust matrix is very complex; consequently, PAH detection sensitivity deteriorates, especially for trace PAHs in the exhaust. Yet, these are conditions and amounts that exist in real samples. Nonetheless, selected ion chromatogram (SIC) and tandem mass spectrometry (MS/MS) techniques improve trace PAH detection; ion trap technology makes both mass techniques possible. The purpose of this investigation was to evaluate SIC and MS/MS for applications to measure PAHs in diesel exhaust samples. The signal-to-noise ratio for accurate quantitation improves, relative to traditional mass techniques, because these techniques ignore or eliminate interfering components. On a VF-5MS chromatographic column, these techniques improve sensitivity and reproducibility. They produce a superior limit of detection in the useful range for PAH samples extracted from actual engine exhaust, 10–30 pg for the smaller PAHs and 1–6 ng for the larger PAHs. The results with SIC and MS/MS are reproducible, so analysts can report PAH amounts with defined statistical confidence intervals. SIC and MS/MS improve detection for trace PAHs in convoluted diesel exhaust samples.     

Preparation and Properties of Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) Blends Induced by Gamma Irradiation

Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) blends have been prepared by casting solution method. The effect of different irradiation doses (2.5, 5, 10, 15, and 20 kGy) of gamma rays on the physical properties of the CMC/SA blend containing different ratios of SA (20, 30, and 40 %) such as gel fraction (%) and swelling (%) of CMC/SA blends were investigated. It was found that the gel fraction increases with increasing irradiation dose up to 20 kGy while the swelling of CMC/SA blend films tends to increase with increasing SA content and reduced with increasing irradiation doses. Mechanical and thermal properties of the blend films were improved when CMC content increased and with increasing irradiation dose up to 20 kGy. Morphology of the blend was examined by SEM, which indicates compatibility between CMC and SA. The blend rich in SA content possessed good antimicrobial activity against Gram +ve Bacteria (Bacillus subtilis).     

Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions

Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.     

Enhancement of Tensile Strength and Flexibility of Polycaprolactone/Tapioca Starch Blends by Octadecylamine Modified Clay

Polycaprolactone/tapioca starch/octadecylamine modified clay (OMMT) nanocomposites were successfully prepared by melt blending. X-ray diffraction and transmission electron microscopy (TEM) of the products showed that they are nanocomposites of a mixture intercalated and exfoliated types. In addition, the TEM also revealed that the OMMT layers are homogeneously distributed in the polymer matrix. The presence of 1 php of OMMT improved the compatibility of the polymers in the blends which consequently increased the tensile strength of the blend of more than 60% and elongation at break of more than 1,000%.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.     

Heavy metal removal and cyanide destruction in the metal plating industry: an integrated approach from egypt

Wastewater produced from a metal plating is a major environmental problem. Industrial auditing revealed that the main source of pollution mainly originated from rinsing water. The characterization of final effluent showed that it is highly contaminated with hazardous heavy metals and cyanide. The concentration of copper, hexavalent chromium, nickel, and cyanide in the rinsing water of metal plating department was 14.8, 40.9, 13.3, and 19 mg/l, respectively. The concentration of cyanide and zinc from the galvanizing department reached 60 and 80 mg/l. The remediation scheme included the application of in-plant control measures via changing the rinsing process followed by the destruction of cyanide and reduction of hexavalent chromium bearing wastes. The pretreated wastes were then mixed with other industrial wastes prior to a combined chemical coagulation-sedimentation using lime and/or lime in combination with ferric chloride. The results indicated that, after applying the waste minimization measures alone at the source, prior to final treatment of industrial waste, removal rates of cyanide, copper, nickel, and chromium concentrations were 23.2%, 14.9%, 32.3%, and 55.3%, respectively in the rinse water from metal plating department. Furthermore, the removal rates of cyanide and zinc in the galvanizing department reached 59.7% and 24.3. The integrated control measures and treatment scheme led to more than 99% removal of copper, nickel, chromium, and zinc, while the complete removal of cyanide was achieved in the final effluent.