Root Causes and Impacts of Severe Accidents at Large Nuclear Power Plants

The root causes and impacts of three severe accidents at large civilian nuclear power plants are reviewed: the Three Mile Island accident in 1979, the Chernobyl accident in 1986, and the Fukushima Daiichi accident in 2011. Impacts include health effects, evacuation of contaminated areas as well as cost estimates and impacts on energy policies and nuclear safety work in various countries. It is concluded that essential objectives for reactor safety work must be: (1) to prevent accidents from developing into severe core damage, even if they are initiated by very unlikely natural or man-made events, and, recognizing that accidents with severe core damage may nevertheless occur; (2) to prevent large-scale and long-lived ground contamination by limiting releases of radioactive nuclides such as cesium to less than about 100 TBq. To achieve these objectives the importance of maintaining high global standards of safety management and safety culture cannot be emphasized enough. All three severe accidents discussed in this paper had their root causes in system deficiencies indicative of poor safety management and poor safety culture in both the nuclear industry and government authorities.     

Short-Run Allocation of Emissions Allowances and Long-Term Goals for Climate Policy

We summarize the latest results on the rapid changes that are occurring to Arctic sea ice thickness and extent, the reasons for them, and the methods being used to monitor the changing ice thickness. Arctic sea ice extent had been shrinking at a relatively modest rate of 3–4% per decade (annually averaged) but after 1996 this speeded up to 10% per decade and in summer 2007 there was a massive collapse of ice extent to a new record minimum of only 4.1 million km². Thickness has been falling at a more rapid rate (43% in the 25 years from the early 1970s to late 1990s) with a specially rapid loss of mass from pressure ridges. The summer 2007 event may have arisen from an interaction between the long-term retreat and more rapid thinning rates. We review thickness monitoring techniques that show the greatest promise on different spatial and temporal scales, and for different purposes. We show results from some recent work from submarines, and speculate that the trends towards retreat and thinning will inevitably lead to an eventual loss of all ice in summer, which can be described as a ‘tipping point’ in that the former situation, of an Arctic covered with mainly multi-year ice, cannot be retrieved.     

The Impact of First-Generation Biofuels on the Depletion of the Global Phosphorus Reserve

The large majority of biofuels to date is "first-generation" biofuel made from agricultural commodities. All first-generation biofuel production systems require phosphorus (P) fertilization. P is an essential plant nutrient, yet global reserves are finite. We argue that committing scarce P to biofuel production involves a trade-off between climate change mitigation and future food production. We examine biofuel production from seven types of feedstock, and find that biofuels at present consume around 2% of the global inorganic P fertilizer production. For all examined biofuels, with the possible exception of sugarcane, the contribution to P depletion exceeds the contribution to mitigating climate change. The relative benefits of biofuels can be increased through enhanced recycling of P, but high increases in P efficiency are required to balance climate change mitigation and P depletion impacts. We conclude that, with the current production systems, the production of first-generation biofuels compromises food production in the future.     

Very high correlations between fresh weight and lipid-adjusted PCB-153 serum concentrations: irrespective of fasting status, age, body mass index, gender, or exposure distributions

Background and aim

Persistent organochlorine pollutants (POPs) have in epidemiological studies been associated with health hazards. The exposure window might be crucial and it is, accordingly, important to analyze exposure concentrations in samples collected at the window of interest. This makes the use of stored blood samples extremely interesting. However, small blood volumes from stored samples in biobanks means that the researchers in epidemiological studies most often have to select a limited number of biomarkers representing the POP exposure and abstain from analyses of lipid concentrations. This raises the question of the necessity of lipid adjustment. The aim of the present study was to evaluate the correlation between fresh weight and lipid adjusted concentrations.

Methods

We included data from studies were we have used the PCB congener 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB-153) as a biomarker for POP exposure and where fresh weight as well as lipid adjusted PCB-153 concentrations are known (n = 1628). The variety of the cohort members in the different studies gave us the possibility to better understand how well these measures correlate.

Results

When all individuals were included in the analyses a correlation coefficient of 0.95 between fresh weight and lipid adjusted serum concentrations was obtained. Restricting the analyses to specific subgroups (based on gender, fasting status, age and BMI) gave correlation coefficients between 0.85 and 0.97.

Conclusions

This study does strongly support the use of samples from biobanks in epidemiological studies for analyzing PCBs, at least regarding PCB-153, even though it is not possible to lipid adjust the results.     

The war on deciduous forest: Large-scale herbicide treatment in the Swedish boreal forest 1948 to 1984

At the mid-twentieth century the pace of the transformation of the Swedish forest increased. New methods; large-scale clearcutting, mechanization of logging and planting of seedlings were developed. Chemicals were used to control insects and unwanted tree species. The aims of this study were to elucidate the timing, chain of events and the spatial extent of the large-scale spraying of phenoxy acids in Swedish forests and the drivers for this practice. More than 700 000 hectares of productive forest land was sprayed and the main driving force was a strong will to transform the forest into high-yield coniferous forest plantations. We conclude that; (1) the use of herbicides in forestry in Sweden was done on a very large scale in the period 1948–1984, (2) the ecosystem legacy of herbicide spraying must be investigated and (3) a homogenous cadre of like-minded professionals working across commercial companies, state agencies and universities is dangerous.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01660-5.     

Experiences from phasing out the use of mercury in Sweden

The Swedish parliament has decided that the use of mercury (Hg) in society should be phased out by the target year 2000 and substituted with alternative, less harmful elements or compounds. This is to reduce exposure to the toxic heavy metal, levels of which have increased two to seven times in the Swedish environment during the last century. Mercury in products and goods in use in Sweden has been estimated at 100 tonnes Hg, which will slowly be released into the environment if no preventative measures are taken. To avoid handing over unsolved environmental problems and connected costs to future generations, the Swedish government commissioned the Swedish Environmental Protection Agency (EPA) to improve the efficiency of Hg collection and to find a solution for terminal storage of the waste. The result is that the Swedish EPA considers deep storage in rock, accompanied by technical measures to further reduce the risk of future Hg emissions to be the safest method. It has funded approximately 50 projects with the goal of spreading information about the Hg problem and removing Hg from society. The projects have focused on areas where there is a great risk of Hg in products and goods entering the environment. About 6 tonnes Hg has so far been collected in these projects – end of 1999 – and the cost of the Hg collected has varied between 70 and 1300 US$ kg^–1 Hg. The projects were more cost-effective than traditional inspection by an official due to local participation, use of Hg-tracker dogs, and employment of professional electricians in the search for Hg. The involvement of school children and the public has resulted in an increased awareness of environmental matters, and, together with the emptying of water seals, reduced Hg levels in municipal sewage sludge. Electronic Publication     

Occupational exposure to beryllium in primary aluminium production

Alumina used in the production of primary aluminium contains Be which partly vaporises from the cryolite bath into the workroom atmosphere. Since Be may be toxic at lower exposure levels than previously thought, the personal exposure to Be among workers in 7 Norwegian primary smelters has been assessed. In total, 480 personal Respicon? virtual impactor full shift air samples have been collected during 2 sampling campaigns and analysed for water soluble Be, Al and Na using inductively coupled plasma optical emission spectrometry. In addition, water soluble F(-) has been measured by ion chromatography. The Be air concentrations in the inhalable, thoracic and respirable aerosol fractions have been calculated. The Be concentrations in the inhalable aerosol fraction vary between the different smelters. The highest GM concentration of Be in the inhalable fraction (122 ng m(-3), n = 30) was measured in the prebake pot room of a smelter using predominantly Jamaican alumina where also the highest individual air concentration of 270 ng m(-3) of Be was identified. The relative distribution of Be in the different aerosol fractions was fairly constant with the mean Be amount for the two sampling campaigns between 44-49% in the thoracic fraction expressed as % of the inhalable amount. Linear regression analysis shows a high correlation between water soluble Be, Al, F and Na describing an average measured chemical bulk composition of the water soluble thoracic fraction as Na(5.7)Al(3.1)F(18). Be is likely to be present as traces in this particulate matter by replacing Al atoms in the condensed fluorides and/or as a major element in a nanoparticle sized fluoride. Thus, the major amount of Be present in the work room atmosphere of Al smelter pot rooms will predominantly be present in combination with substantial amounts of water soluble Al, F and Na.     

Agriculture as Provider of Both Food and Fuel

A database of global agricultural primary production has been constructed and used to estimate its energy content. The portion of crops available for food and biofuel after postharvest losses was evaluated. The basic conditions for agriculture and plant growth were studied, to ensure sustainable scenarios regarding use of residues. The available energy contents for the world and EU27 was found to be 7,200–9,300 and 430 TWh, respectively, to be compared with food requirements of 7,100 and 530 TWh. Clearly, very little, or nothing, remains for biofuel from agricultural primary crops. However, by using residues and bioorganic waste, it was found that biofuel production could theoretically replace one-fourth of the global consumption of fossil fuels for transport. The expansion potential for global agriculture is limited by availability of land, water, and energy. A future decrease in supply of fossil energy and ongoing land degradation will thus cause difficulties for increased biofuel production from agriculture.     

Design and off-design analyses of a pre-combustion CO2 capture process in a natural gas combined cycle power plant

In this study, a cycle designed for capturing the greenhouse gas CO₂ in a natural gas combined cycle power plant has been analyzed. The process is a pre-combustion CO₂ capture cycle utilizing reforming of natural gas and removal of the carbon in the fuel prior to combustion in the gas turbine. The power cycle consists of a H₂-fired gas turbine and a triple pressure steam cycle. Nitrogen is used as fuel diluent and steam is injected into the flame for additional NO_x control. The heat recovery steam generator includes pre-heating for the various process streams. The pre-combustion cycle consists of an air-blown auto-thermal reformer, water–gas shift reactors, an amine absorption system to separate out the CO₂, as well as a CO₂ compression block. Included in the thermodynamic analysis are design calculations, as well as steady-state off-design calculations. Even though the aim is to operate a plant, as the one in this study, at full load there is also a need to be able to operate at part load, meaning off-design analysis is important. A reference case which excludes the pre-combustion cycle and only consists of the power cycle without CO₂ capture was analyzed at both design and off-design conditions for comparison. A high degree of process integration is present in the cycle studied. This can be advantageous from an efficiency stand-point but the complexity of the plant increases. The part load calculations is one way of investigating how flexible the plant is to off-design conditions. In the analysis performed, part load behavior is rather good with efficiency reductions from base load operation comparable to the reference combined cycle plant.     

Bepflanzung einer Tankstelle mit Weiden

In Axelved, Denmark, an abandoned gas filling station serves as a test field for phytoremediation. Laboratory studies accompany the project. The toxicity of fresh and weathered gasoline and diesel to willow and poplar trees was studied by use of a tree transpiration toxicity test. The correlation between diesel content in soil and decrease in willow tree transpiration (Salix viminalis x schwerinii) was highly significant (r ²=0.81, n=19). the EC₅₀ (50% inhibition of transpiration) for the sum of hydrocarbons (HC) was determined to be 3910 mg/kg (95% confidence interval from 2900 to 5270 mg/kg). The EC₁₀ was 810 mg/kg (95% confidence interval 396 to 1660 mg/kg). The results were verified with artificially mixed diesel and gasolinecontaminated soils and two willow and one poplar species (S. viminalis, S. alba andPopulus nigra). The degradation of radiolabeledm-xylene was studied with and without willows. The compound was readily degraded. Willow trees accelerated the elimination, but mainly due to the volatilization ofm-xylene. Model studies provided the result that biodegradation in soil is the fastest elimination process at the site, but it is limited by the availability of electron acceptors. The pollutants are almost persistent in the groundwater, but in aerated soil, 10000 mg/kg hydrocarbons at 1 m depth are degraded within 13 years. The main effect of willows on the pollutants’ persistence is that willows transpire water, lower the groundwater level and aerate the soil, hereby speeding up biodegradation.