Accuracy assessment of land surface temperature retrievals from Landsat 7 ETM + in the Dry Valleys of Antarctica using iButton temperature loggers and weather station data

The McMurdo Dry Valleys of Antarctica are the largest snow/ice-free regions on this vast continent, comprising 1 % of the land mass. Due to harsh environmental conditions, the valleys are bereft of any vegetation. Land surface temperature is a key determinate of microclimate and a driver for sensible and latent heat fluxes of the surface. The Dry Valleys have been the focus of ecological studies as they arguably provide the simplest trophic structure suitable for modelling. In this paper, we employ a validation method for land surface temperatures obtained from Landsat 7 ETM + imagery and compared with in situ land surface temperature data collected from four transects totalling 45 iButtons. A single meteorological station was used to obtain a better understanding of daily and seasonal cycles in land surface temperatures. Results show a good agreement between the iButton and the Landsat 7 ETM + product for clear sky cases. We conclude that Landsat 7 ETM + derived land surface temperatures can be used at broad spatial scales for ecological and meteorological research.     

Spatial & temporal variations of PM10 and particle number concentrations in urban air

The size of particles in urban air varies over four orders of magnitude (from 0.001 μm to 10 μm in diameter). In many cities only particle mass concentrations (PM10, i.e. particles <10 μm diameter) is measured. In this paper we analyze how differences in emissions, background concentrations and meteorology affect the temporal and spatial distribution of PM10 and total particle number concentrations (PNC) based on measurements and dispersion modeling in Stockholm, Sweden. PNC at densely trafficked kerbside locations are dominated by ultrafine particles (<0.1 μm diameter) due to vehicle exhaust emissions as verified by high correlation with NOx. But PNC contribute only marginally to PM10, due to the small size of exhaust particles. Instead wear of the road surface is an important factor for the highest PM10 concentrations observed. In Stockholm, road wear increases drastically due to the use of studded tires and traction sand on streets during winter; up to 90% of the locally emitted PM10 may be due to road abrasion. PM10 emissions and concentrations, but not PNC, at kerbside are controlled by road moisture. Annual mean urban background PM10 levels are relatively uniformly distributed over the city, due to the importance of long range transport. For PNC local sources often dominate the concentrations resulting in large temporal and spatial gradients in the concentrations. Despite these differences in the origin of PM10 and PNC, the spatial gradients of annual mean concentrations due to local sources are of equal magnitude due to the common source, namely traffic. Thus, people in different areas experiencing a factor of 2 different annual PM10 exposure due to local sources will also experience a factor of 2 different exposure in terms of PNC. This implies that health impact studies based solely on spatial differences in annual exposure to PM10 may not separate differences in health effects due to ultrafine and coarse particles. On the other hand, health effect assessments based on time series exposure analysis of PM10 and PNC, should be able to observe differences in health effects of ultrafine particles versus coarse particles.     

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.     

Application of processed organic municipal solid waste on agricultural land – a scenario analysis

Source separation, composting and anaerobic digestion, with associated land application, are increasingly being considered as alternative waste management strategies to landfilling and incineration of municipal solid waste (MSW). Environmental life cycle assessments are a useful tool in political decision-making about waste management strategies. However, due to the diversity of processed organic MSW and the situations in which it can be applied, the environmental impacts of land application are very hard to determine by experimental means. In the current study, we used the agroecosystem model Daisy to simulate a range of different scenarios representing different geographical areas, farm and soil types under Danish conditions and legislation. Generally, the application of processed organic MSW resulted in increased emissions compared with the corresponding standard scenarios, but with large differences between scenarios. Emission coefficients for nitrogen leaching to the groundwater ranged from 0.03 to 0.87, while those for nitrogen lost to surface waters through tile drains ranged from 0 to 0.30. Emission coefficients for N₂O formation ranged from 0.013 to 0.022 and for ammonia volatilization from 0.016 to 0.11. These estimates are within reasonable range of observed values under similar conditions. Furthermore, a sensitivity analysis showed that the estimates were not very sensitive to the mineralization dynamics of the processed organic MSW. The results show that agroecosystem models can be powerful tools to estimate the environmental impacts of land application of processed MSW under different conditions. Despite this, agroecosystem models have only been used to a very limited degree for this purpose.     

Ignition of dust-air atmospheres by ultrasonic waves

This paper shows the results of our investigations on the ignition source ultrasound in dust-air atmospheres. Ultrasound is, on the one hand, considered to be an ignition source according to international safety standards (EN 1127–1 (2011)). On the other hand, though, ultrasound is used for various applications in gases and air, such as level and flow measurement, or in the process industry, but no explosion accidents have yet been reported. Our research now shows that it is indeed possible to ignite dust-air mixtures in ultrasound fields under certain conditions. We conducted our experiments in an ultrasound standing wave field and used maize starch, calcium stearate and sulfur dust. For ignitions, an absorbing target was needed to convert the acoustic energy into heat. From theoretical estimations and experiments critical conditions that provoke ultrasonically triggered explosions are identified.     

Solutions for characterising natural landscapes in New Zealand using geographical information systems

This paper explores solutions for characterising naturalness in relation to visual landscapes using Geographical Information System (GIS). It is argued that planners need to identify natural landscapes and monitor changes in their extent. Just like the indices that have been developed to describe the state of the economy, indices need to be developed that monitor the state of natural landscapes. The complications in characterising natural landscapes are outlined but it is argued that there is a need to develop definitions of natural landscapes that can be operationalised with a GIS. This will have the advantages of the efficiency of the technology and that the definition will be explicit and the implementation will be independent of the operator. Several GIS solutions are provided and these are an analysis of landcover, a density analysis of roads and utilities, and an analysis of property sizes. The analysis of property sizes is sensitive to many human modifications of the landscape because many developments begin with the subdivision of properties. However, it is argued in this paper that no one definition will suffice and that all three methods provide different, yet important, insights into natural landscape character. An aggregate classification of naturalness based on the majority value of the indices is demonstrated as well as a range of techniques for expressing the uncertainty of the aggregate classification.     

Objectively best or most acceptable? Expert and lay knowledge in Swedish wind power permit processes

This article analyses legal aspects of the Swedish wind power development, theoretically based on how different types of knowledge are represented in legal contexts, mainly in the courts. A sample of appealed wind power permits is analysed, a handful of relevant informants are interviewed – including two judges in the Land and Environment Court and the appeal court – and the legal setting is analysed. Of key interest here is the interplay between expert and lay statements in the court cases, which here is related to the concepts of calculating and communicative rationalities that are developed in the planning literature. The results indicate that the juridification – which takes place as a permit issue is appealed in the judiciary system – supports the calculating rationality more than the communicative, and that the plaintiffs often attempt to adapt in how they shape their argumentation.