Effect of substrate feeding frequencies on the methane production and microbial communities of laboratory-scale anaerobic digestion reactors

Even though full-scale digesters have been designed based on laboratory-scale tests, the substrate feeding modes of laboratory-scale tests might be different from those of full-scale digesters. The effect of substrate feeding frequencies on the performance and microbial community of laboratory-scale anaerobic digestion reactors was investigated. Feeding frequencies of twice a day, once a day, and every two days were tested in three 2-L reactors with an organic loading rate of 0.5 g-glucose/L/day under mesophilic condition. According to the results of this study, all the reactors showed similar methane production rates and SCOD removal efficiencies after sufficient time of acclimation, but frequently feeding promoted more stable digestion. Although there was no significant difference in microbial diversities from pyrosequencing analyses, the changes of archaeal community composition were observed. The decrease in feeding frequency appeared to cause shifts from acetoclastic methanogens affiliated with Methanosaeta to H₂-utilizing methanogens. The increase of Methanosaeta at a frequently feeding might contribute to the stability of reactor operation. Since this study uses glucose as the substrate, there is still possibility of different results for more complex substrates, such as sludge, food waste, etc.     

Production of gaseous fuel from refuse plastic fuel via co-pyrolysis using low-quality coal and catalytic steam gasification

In this study, refuse plastic fuel (RPF) was copyrolyzed with low-quality coal and was gasified in the presence of a metal catalyst and steam. Some metal catalysts, such as Ni, NiO, and Mg, and mixtures of these with base promoters such as Al₂O₃ and Fe₂O₃ were employed in the pyrolysis and gasification processes to convert the synthesis gas into more valuable fuel gas. The operating temperatures for the pyrolysis and gasification were between 700° and 1000°C. The experimental parameters were the operating temperature, catalyst type, basic promoter type, and steam injection amount. Solid fuel samples (5 g) were fed into a semibatch-type quartz tube reactor when the reactor reached the designated temperature. The synthesis gas was analyzed by gas chromatography. The use of low-quality coal as fuel in co-pyrolysis with RPF was explored. For the co-pyrolysis of RPF and low-quality coal, the effectiveness of the catalysts for fuel gas production followed the order Mg > NiO > Ni. In catalytic gasification of RPF, the addition of Al₂O₃ seemed to reduce the activity of the corresponding catalysts Ni and Mg. The maximum fuel gas yield (92.6%) was attained when Mg/Fe₂O₃ was used in steam gasification at 1000°C.     

Application of recycled aggregate porous concrete pile (RAPP) to improve soft ground

In this study, a series of laboratory chamber tests was carried out to evaluate the applicability of a porous concrete pile fabricated with recycled aggregates for soft ground improvement. The recycled aggregate porous concrete pile (RAPP) has been developed to replace natural aggregates and to overcome technical problems associated with the conventional compaction piling systems. The laboratory chamber tests for evaluating the performance of RAPP were carried out with a cylindrical mold of 280?mm in internal diameter and 580?mm in height. A replacement area ratio of 5?% and three different loading steps were applied in the chamber tests. The experimental results of the surface settlement, excess pore pressure and vertical stress distribution versus time were compared with those of the sand compaction pile (SCP) reinforced composite ground under the same experimental condition. In addition, the experimental results were compared with the numerical simulation using ABAQUS. The current study shows that the settlement reduction in the RAPP-reinforced system is?significantly enhanced due to load transfer from the soil formation to the RAPP. Furthermore, the comparison of consolidation rates shows that the RAPP can also accelerate the consolidation of soft clay formation because the RAPP behaves as a vertical drain.     

Accumulation of pollutant nitrogen in calcareous and acidic grasslands: Evidence from N flux and 15N tracer studies

Semi-natural calcareous and acidic grasslands are known to be sensitive to increased atmospheric N deposition. However, the fate of pollutant N within these systems is unknown. This paper reports on the first studies to determine the fate of added N within a calcareous and an acidic grassland subject to long-term simulated enhanced N deposition. Intact soil/turf cores were removed from field plots treated for six years with enhanced N deposition (ambient +0, +35 and +140 kg N ha^–1 year^–1). Cores were inserted into lysimeters and output fluxes of N were monitored in detail. Complete N budgets—calculated from the N flux data—showed considerable accumulation of N within the treated grasslands, up to 76% and 38% of pollutant N in the calcareous and acidic grasslands respectively. In the second study, the short-term (21 day) fate of pollutant N was determined by tracing ¹⁵N labelled ammonium nitrate (+35 kg N ha^–1 year^–1) though the acidic and calcareous lysimeters into plant, soil and leachate pools. Up to 91% and 59% of ¹⁵N was recovered in soils and vegetation of the calcareous and acidic grasslands respectively, with negligible amounts recovered in soil extractable ammonium and nitrate (<0.3%) and in leachate (<0.02%). This rapid short-term immobilisation of pollutant N supports the long-term accumulation of the element calculated from the N flux study.     

Characterizing soils contaminated with heavy metals: A uranium contamination case study

To stem rising remediation costs for soils contaminated with hazardous metals, increased emphasis is being placed on the development of in-situ and ex-situ treatment technologies. Often, a lack of basic information on the chemical and physical characteristics of the soil and contaminants hampers treatability studies used to design these technologies. This article proposes and demonstrates a characterization program to meet these information needs, employing standard analytical techniques coupled with advanced spectroscopy and microscopy techniques. To support treatments involving physical separation strategies, the program uses standard analytical techniques to characterize the soil and the association of contaminants with different soil fractions (e.g., size and density fractions). Where chemical treatments are required, spectroscopy and microscopy methods are employed to yield quantitative information on the oxidation state and speciation of the contaminant. Examples demonstrate the use of measured soil and contaminant characteristics in the screening of alternative treatment technologies and in the selection of soils for use in treatability studies. Also demonstrated is the use of these characterization tools in the design and optimization of treatment strategies and in support of risk assessment determinations.     

Scenario‐Based Evaluation of Commercially Available Cleaning Robots for Collection of Bacillus Spores from Environmental Surfaces

The cleaning robots, a vacuum‐based robot (R2) and a wetted‐wipe‐based robot (R4), were evaluated in this study to determine their effectiveness for sampling Bacillus atrophaeus spores. The tests were designed to evaluate the benefit of robot sampling on large areas with two different contamination scenarios: a high‐concentration, low spatial extent contamination (hot spot) and a low concentration, high spatial extent contamination (widely dispersed). The hot spot tests were conducted with the high spore contamination (approximately 10⁷ colony forming units [CFUs]) on a limited area (30.5 cm × 30.5 cm), 2 percent of the entire test. The widely dispersed tests were conducted with approximately 0.1 CFUs/cm² for floor laminate and approximately 10 CFUs/cm² for carpet surfaces. The widely dispersed tests distributed spores across the test surface and covered approximately 40 percent of the entire test area. The test results showed that both robots successfully sampled a large quantity of spores from carpet and floor laminate surfaces for both test scenarios. Robot performance is discussed in the context of currently used surface sampling methods. © 2014 Wiley Periodicals, Inc.*     

Hydrometallurgical processing of Nd–Fe–B magnets for Nd purification

An evaluation of various metal purification processes subsequent to the leaching processing of the neodymium (Nd) product from neodymium–iron–boron (Nd–Fe–B) magnets has been conducted. These post-leaching purification processes included precipitation; replacement and electrolysis were studied in order to check the purity of the recovered neodymium. A hydrometallurgical investigation was adopted to digest the metal content of the scrap Nd–Fe–B magnets for the recovery of valuable Nd metal and other metals such as Fe, B, Co and Ni. The effect of leaching conditions such as solid-to-liquid ratio and temperature were optimized and 100 % Nd, 100 % Fe, 100 % B and 85.87 % Co leaching efficiencies were achieved under these conditions. The coating material of the magnet, Ni, achieved 50 % impregnation after increasing the reaction temperature to 70 °C. The metals present in the optimal leaching solution were recovered 99 % by pH adjustment. However, the replacement had the highest separation efficiency for the recovery of Nd metal. Further, the optimal leaching Nd–Fe–B solution was subjected to the electrolysis processes in order to verify the recovery efficiency for all metals.