Source profiles of particulate matter emissions from a pilot-scale boiler burning North American coal blends.

Recent awareness of suspected adverse health effects from ambient particulate matter (PM) emission has prompted publication of new standards for fine PM with aerodynamic diameter less than 2.5 microm (PM2.5). However, scientific data on fine PM emissions from various point sources and their characteristics are very limited. Source apportionment methods are applied to identify contributions of individual regional sources to tropospheric particulate concentrations. The existing industrial database developed using traditional source measurement techniques provides total emission rates only, with no details on chemical nature or size characteristics of particulates. This database is inadequate, in current form, to address source-receptor relationships. A source dilution system was developed for sampling and characterization of total PM, PM2.5, and PM10 (i.e., PM with aerodynamic diameter less than 10 pm) from residual oil and coal combustion. This new system has automatic control capabilities for key parameters, such as relative humidity (RH), temperature, and sample dilution. During optimization of the prototype equipment, three North American coal blends were burned using a 0.7-megawatt thermal (MWt) pulverized coal-fired, pilot-scale boiler. Characteristic emission profiles, including PM2.5 and total PM soluble acids, and elemental and carbon concentrations for three coal blends are presented. Preliminary results indicate that volatile trace elements such as Pb, Zn, Ti, and Se are preferentially enriched in PM2.5. PM2.5 is also more concentrated in soluble sulfates relative to total PM. Coal fly ash collected at the outlet of the electrostatic precipitator (ESP) contains about 85-90% PM10 and 30-50% PM2.5. Particles contain the highest elemental concentrations of Si and Al while Ca, Fe, Na, Ba, and K also exist as major elements. Approximately 4-12% of the materials exists as soluble sulfates in fly ash generated by coal blends containing 0.2-0.8% sulfur by mass. Source profile data for an eastern U.S. coal show good agreement with those reported from a similar study done in the United States. Based on the inadequacies identified in the initial sampling equipment, a new, plume-simulating fine PM measurement system with modular components for field use is being developed for determining coal combustion PM source profiles from utility boiler stacks.     

Importance of health assessments for conservation in noncaptive wildlife

Wildlife health assessments help identify populations at risk of starvation, disease, and decline from anthropogenic impacts on natural habitats. We conducted an overview of available health assessment studies in noncaptive vertebrates and devised a framework to strategically integrate health assessments in population monitoring. Using a systematic approach, we performed a thorough assessment of studies examining multiple health parameters of noncaptive vertebrate species from 1982 to 2020 (n = 261 studies). We quantified trends in study design and diagnostic methods across taxa with generalized linear models, bibliometric analyses, and visual representations of study location versus biodiversity hotspots. Only 35% of studies involved international or cross-border collaboration. Countries with both high and threatened biodiversity were greatly underrepresented. Species that were not listed as threatened on the International Union for Conservation of Nature Red List represented 49% of assessed species, a trend likely associated with the regional focus of most studies. We strongly suggest following wildlife health assessment protocols when planning a study and using statistically adequate sample sizes for studies establishing reference ranges. Across all taxa blood analysis (89%), body composition assessments (81%), physical examination (72%), and fecal analyses (24% of studies) were the most common methods. A conceptual framework to improve design and standardize wildlife health assessments includes guidelines on the experimental design, data acquisition and analysis, and species conservation planning and management implications. Integrating a physiological and ecological understanding of species resilience toward threatening processes will enable informed decision making regarding the conservation of threatened species.     

Solar photo-oxidation of recalcitrant industrial wastewater: a review

Conventional methods to clean wastewater actually lead to incomplete treatments, calling for advanced technologies to degrade recalcitrant pollutants. Herein we review solar photo-oxidation to degrade the recalcitrant contaminants in industrial wastewater, with focus on photocatalysts, reactor design and the photo-Fenton process. We discuss limitations due to low visible-light absorption, catalyst collection and reusability, and production of toxic by-products. Photodegradation of refractory organics by solar light is controlled by pH, photocatalyst composition and bandgap, pollutant properties and concentration, irradiation type and intensity, catalyst loading, and the water matrix.

     

Sorption, mobility, and transformation of estrogenic hormones in natural soil

Potent estrogenic hormones are consistently detected in the environment at low concentration, yet these chemicals are strongly sorbed to soil and are labile. The objective of this research was to improve the understanding of the processes of sorption, mobility, and transformation for estrogens in natural soils, and their interaction. Equilibrium and kinetic batch sorption experiments, and a long-term column study were used to study the fate and transport of 17beta-estradiol and its primary metabolite, estrone, in natural soil. Kinetic and equilibrium batch experiments were done using radiolabeled 17beta-estradiol and estrone. At the concentrations used, it appeared that equilibrium sorption for both estrogens was achieved between 5 and 24 h, and that the equilibrium sorption isotherms were linear. The log K(oc) values for 17beta-estradiol (2.94) and estrone (2.99) were consistent with previously reported values. Additionally, it was found that there was rate-limited sorption for both 17beta-estradiol (0.178 h(-1)) and estrone (0.210 h(-1)). An approximately 42 h long, steady-flow, saturated column experiment was used to study the transport of radiolabeled 17beta-estradiol, which was applied in a 5.00 mg L(-1) solution pulse for 44 pore volumes. 17beta-estradiol and estrone were the predominant compounds detected in the effluent. The effluent breakthrough curves were asymmetric and the transport modeling indicated that sorption was rate-limited. Sorption rates and distributions of the estrogens were in agreement between column and batch experiments. This research can provide a better link between the laboratory results and observations in the natural environment.     

WATER RESOURCES MODELING AND OPTIMIZATION BASED ON CONSERVATION AND FLOODING POOLS1

ABSTRACT: A new and practical concept in water resources modeling and optimization is introduced. Instead of unrealistically assuming a multipurpose reservoir to be composed of a single lumped pool of water, it is treated as two different pools namely conservation and flood pools. Based on this treatment, the optimization problem is stated using the concepts of Lagrange multipliers and parameter optimization. The optimization problem consists of the material balance equation, the constraints on control and state variables and the objective function.     

Influence of a municipal solid waste incinerator on ambient air and soil PCDD/Fs levels

To examine the influence of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) emissions from a municipal solid waste incinerator (MSWI) on the environment, we measured the levels of PCDD/Fs in ambient air and soil samples collected near a MSWI in Bucheon, Korea. The PCDD/Fs concentrations in the ambient air samples ranged from 0.22 to 1.16 pg I-TEQm(-3) (13.39-75.16 pg m(-3)), with an average of 0.66 pg I-TEQ m(-3) (35.62 pg m(-3)). The soil samples contained between 1.25 and 74.98 pg I-TEQ g(-1) (38.15-3,303.33 pg g(-1)), with an average of 19.06 pg I-TEQ g(-1) (1,077.11 pg g(-1)). These levels were higher than those previously reported by other investigators in a number of surveys. The furan homologues predominated in the air samples and some soil samples, and the soil PCDD/Fs levels decreased with increasing distance from the MSWI. Comparison of the homologue patterns and a multivariate statistical analysis showed that PCDD/Fs emission from the MSWI directly affected the pattern of PCDD/Fs in air, while the PCDD/Fs patterns in soil differed according to the location relative to the MSWI, roads, and construction sites. These results collectively indicate that the MSWI was the major PCDD/Fs emission source in this area, but that unidentified combustion sources and vehicles might influence the environment to some extent.     

Volatile organic compounds (VOCs) in urban atmosphere of Hong Kong

The assessment of volatile organic compounds (VOCs) has become a major issue of air quality network monitoring in Hong Kong. This study is aimed to identify, quantify and characterize volatile organic compounds (VOCs) in different urban areas in Hong Kong. The spatial distribution, temporal variation as well as correlations of VOCs at five roadside sampling sites were discussed. Twelve VOCs were routinely detected in urban areas (Mong Kok, Kwai Chung, Yuen Long and Causeway Bay). The concentrations of VOCs ranged from undetectable to 1396 microg/m3. Among all of the VOC species, toluene has the highest concentration. Benzene, toluene, ethylbenzene and xylenes (BTEX) were the major constituents (more than 60% in composition of total VOC detected), mainly contributed from mobile sources. Similar to other Asian cities, the VOC levels measured in urban areas in Hong Kong were affected both by automobile exhaust and industrial emissions. High toluene to benzene ratios (average T/B ratio = 5) was also found in Hong Kong as in other Asian cities. In general, VOC concentrations in the winter were higher than those measured in the summer (winter to summer ratio > 1). As toluene and benzene were the major pollutants from vehicle exhausts, there is a necessity to tighten automobile emission standards in Hong Kong.     

Effects of feed solutions on refuse hydrolysis and landfill leachate characteristics

Tap water, aerobically pre-treated leachate, and anaerobically pre-treated leachate, were each fed into the top of a series of three simulated landfills columns, filled with municipal solid waste collected in Shanghai, China. Changes in leachate, including pH, total organic carbon (TOC), and volatile fatty acids (VFAs), and the produced biogas were monitored over time. The tap-water-fed columns had a low hydrolysis rate that yielded an acidic environment (pH 4.8-5.4) in the leachate that inhibited methanogenesis reaction in the refuse. When aerobically pre-treated leachate was fed into the columns, the hydrolysis rate of total organic carbon fluctuated between 200 and 400 mg d-1 and methanogenesis in the refuse column was only partly activated. The hydrolysis rate of refuse fed with anaerobically pre-treated leachate was the highest among the three solutions. The high alkaline levels of the anaerobically pre-treated leachate and its methanogenic bacteria led to an early activation of methanogenesis in the refuse columns. The VFAs contributed approximately 40-60% of TOC in tap-water-fed columns, 60-80% of TOC in the columns fed aerobically pre-treated leachate, and up to 70-90% of TOC in columns fed with anaerobically pre-treated leachate. The feed solution had considerably affected leachate characteristics, and then the build-up of the methanogenesis in the refuse column and the composition of fermentation products in the leachate. The success of a bioreactor landfill depends on whether the recycled leachate could yield a favorable methanogenic environment in the top refuse layer, or whether an appropriate pre-treatment is adopted to modify the leachate characteristics.     

Co-combustion performance of poultry wastes and natural gas in the advanced Swirling Fluidized Bed Combustor (SFBC)

Co-combustion of poultry wastes with natural gas in an advanced Swirling Fluidized Bed Combustor (SFBC) has been carried out to investigate the performance of poultry wastes combustion. Wastes burnt were poultry litter, poultry manure and sawdust. This paper presents the effect of three different wastes, excess air ratio, and secondary/total air ratio on the combustion characteristics. These characteristics include temperature distributions, carbon combustion efficiency, major gaseous pollutants emissions and heat recovery efficiency. The results indicate that, with the given moisture and ash contents in wastes, the excess air and the secondary air play important roles in achieving stable combustion. The carbon combustion efficiency could increase by 8-10% when the excess air is increased to 25% with the secondary air being at 20% and having a low injection height. However, the carbon combustion efficiency for the sawdust, which is 92% on average, is much higher than that of the poultry litter and manure, which is 81% and 76% on average, respectively. Differences regarding temperature distribution and pollutants emission were also observed with different combinations of the excess air, the secondary air and the secondary air injection height. The NO(x) emission was very low even though the materials contain high levels of nitrogen. In addition, the heat recovery efficiency aiming at the commercial use of the SFBC system for the farm industries was also evaluated.     

Accumulation of pollutant nitrogen in calcareous and acidic grasslands: Evidence from N flux and 15N tracer studies

Semi-natural calcareous and acidic grasslands are known to be sensitive to increased atmospheric N deposition. However, the fate of pollutant N within these systems is unknown. This paper reports on the first studies to determine the fate of added N within a calcareous and an acidic grassland subject to long-term simulated enhanced N deposition. Intact soil/turf cores were removed from field plots treated for six years with enhanced N deposition (ambient +0, +35 and +140 kg N ha^?1 year^?1). Cores were inserted into lysimeters and output fluxes of N were monitored in detail. Complete N budgets—calculated from the N flux data—showed considerable accumulation of N within the treated grasslands, up to 76% and 38% of pollutant N in the calcareous and acidic grasslands respectively. In the second study, the short-term (21 day) fate of pollutant N was determined by tracing ¹⁵N labelled ammonium nitrate (+35 kg N ha^?1 year^?1) though the acidic and calcareous lysimeters into plant, soil and leachate pools. Up to 91% and 59% of ¹⁵N was recovered in soils and vegetation of the calcareous and acidic grasslands respectively, with negligible amounts recovered in soil extractable ammonium and nitrate (<0.3%) and in leachate (<0.02%). This rapid short-term immobilisation of pollutant N supports the long-term accumulation of the element calculated from the N flux study.