Effects of oyster shell on soil chemical and biological properties and cabbage productivity as a liming materials

Oyster shell, a byproduct of shellfish-farming in Korea and containing a high amount of CaCO(3), has a high potential to be used as a liming material in agriculture. However, the agricultural utilization of oyster shell is limited due to its high concentration NaCl. The oyster-shell meal collected had a low concentration of water soluble NaCl (mean 2.7 g kg(-1)), which might be a result of stacking the material for 6 months in the open field. It has a very similar liming potential with calcium carbonate, with 3.4 and 3.8 Mg ha(-1) for silt loam (SiL, pH 6.2) and sandy loam (SL, pH 5.8) to bring the soil pH to 6.5, respectively. To determine the effect of crushed oyster-shell meal on improving soil chemical and biological properties and crop plant productivity, oyster-shell meal was applied at rates of 0, 4, 8, 12, and 16 Mg ha(-1) before transplanting Chinese cabbage (Brassica campestris L.) in the two soils mentioned above. Soil pH was significantly increased to 6.9 and 7.4 by 16 Mg ha(-1) shell meal application (4 times higher level than the recommendation) in SiL and SL, respectively, at harvesting stage. The effect of liming was found higher in SL compared to SiL soil, probably due to the different buffering capacity of the two soils. The concentration of NaCl and EC value of soils were found slightly increased with shell meal applications, but no salt damage was observed. Oyster-shell meal application increased soil organic matter, available P, and exchangeable cations concentrations. The improved soil pH and nutrient status significantly increased the microbial biomass C and N concentrations and stimulated soil enzyme activities. With the exception of acid phosphomonoesterase (PMEase) activity, which decreased with increasing soil pH in SL but slightly increased in SiL, the activities of urease and alkali PMEase increased markedly with increasing soil pH by shell meal application. The improved soil chemical and biological properties resulted in increased crop productivity. The highest yield in Chinese cabbage was achieved following the application of 8 Mg ha(-1) oyster-shell meal. Conclusively, crushed oyster shell could be used as an alternative liming material to restore the soil chemical and microbial properties in upland soil and to increase crop productivity.     

Effect of temperature on bacterial emissions in composting of swine manure

Swine manure was subjected to laboratory scale composting in order to quantify bioaerosols, i.e., airborne culturable bacteria and endotoxin, in the exhaust gas, which provided details on the effect of temperature on bacterial emissions. The concentration of airborne bacteria reached 31,250 colony-forming units (CFU)/m³ during the thermophilic stage of composting, and positively correlated with the temperature profile of the compost pile. Initially, the endotoxin concentration was 1820 endotoxin units (EU)/m³, but it decreased exponentially as the composting process proceeded. The temperature can be an excellent indicator of bacterial emissions during the composting process, indicating that the composting process requires a consistently high temperature to ensure sanitization of both compost and bacterial emissions. The cumulative emission data showed that emission factors was 11.2?13.5 CFU/g dry swine manure and that of endotoxin was 0.5?0.9 EU/g dry swine manure. The bacterial diversity in the bioaerosol was analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis, revealing the presence of various gram-negative bacterial consortia.     

Effect of bioavailable arsenic fractions on the collembolan community in an old abandoned mine waste

Environmental Geochemistry and Health - Mine waste from abandoned mines poses a risk to soil ecosystems due to the dispersion of arsenic (As) in the mine waste to the nearby soil environment....     

The Adaptation for Conservation Targets (ACT) Framework: A Tool for Incorporating Climate Change into Natural Resource Management

As natural resource management agencies and conservation organizations seek guidance on responding to climate change, myriad potential actions and strategies have been proposed for increasing the long-term viability of some attributes of natural systems. Managers need practical tools for selecting among these actions and strategies to develop a tailored management approach for specific targets at a given location. We developed and present one such tool, the participatory Adaptation for Conservation Targets (ACT) framework, which considers the effects of climate change in the development of management actions for particular species, ecosystems and ecological functions. Our framework is based on the premise that effective adaptation of management to climate change can rely on local knowledge of an ecosystem and does not necessarily require detailed projections of climate change or its effects. We illustrate the ACT framework by applying it to an ecological function in the Greater Yellowstone Ecosystem (Montana, Wyoming, and Idaho, USA)-water flows in the upper Yellowstone River. We suggest that the ACT framework is a practical tool for initiating adaptation planning, and for generating and communicating specific management interventions given an increasingly altered, yet uncertain, climate.     

Leaching of Alkali from Concrete in Contact with Waterways

Concrete is usually the preferred material for construction of structures in contact with water during their service life. Early age exposure to water is beneficial for curing of concrete structures. However, the pollution of water from freshly cast concrete in contact with water has not been investigated in detail. A significant increase in the alkalinity has recently been observed in a stream in contact with freshly installed concrete culverts. High alkalinity has caused distress to fresh water fish in the stream. A preliminary laboratory study was commenced to explore the effect of leaching of alkali into water from freshly placed concrete. Freshly cast concrete specimens were exposed to fresh water, covering a range of conditions observed in the field such as volume of concrete/volume of water, age of exposure and cement content. Analysis of the results indicated that early age contact with fresh concrete can lead to an increase in the pH levels of water up to 11, similar to the levels of pH observed in pore water inside freshly cast concrete. It was noted that until an age of 4 days from casting of concrete, the age of exposure does not significantly affect the changes in the peak pH levels of water. Continuous monitoring of water in contact with concrete also indicated that the pH levels diminish with time, which is attributed to the possible reaction of calcium hydroxide with atmospheric carbon. The paper will present the experimental study, the results, analysis and outcomes as well as planning of a more comprehensive study to observe possible ways of reducing the leaching of alkali from freshly placed concrete.     

Cosolvent-enhanced chemical oxidation of perchloroethylene by potassium permanganate

A laboratory study was conducted to examine cosolvent-enhanced in-situ chemical oxidation (ISCO) of perchloroethylene (PCE) using potassium permanganate (KMnO4). The conceptual basis for this new technique is to enhance permanganate oxidation of dense non-aqueous phase liquids (DNAPLs) with the addition of a cosolvent, thereby increasing DNAPL solubility while avoiding mobilization. Among 17 cosolvent candidates screened, tertiary butyl alcohol (TBA) and acetone were the most stable in the presence of KMnO4, both of which increased PCE aqueous solubility significantly, and therefore are suitable to be used as cosolvent in this study. Batch experiments indicated that the second-order rate constant for PCE oxidation by potassium permanganate was 0.043+/-0.002 M(-1) s(-1) in the purely aqueous (no cosolvent) solution. In the presence of 20% cosolvent (volume fraction=fc=0.2), the rate constant decreased to 0.036+/-0.003 M(-1) s(-1) with TBA and to 0.031+/-0.002 M(-1) s(-1) with acetone. However, in the presence of free-phase PCE, chloride ion concentration from PCE oxidation in acetone/water solutions (fc=0.2) was about twice that in aqueous solutions, indicating that the increase in PCE solubility more than compensated for the decrease in reaction rate constant, such that the oxidation efficiency of PCE was increased with cosolvent. A complete chlorine mass balance was observed in the aqueous system, whereas approximately 70% was obtained in TBA/water or acetone/water (fc=0.2). In soil columns containing residual DNAPL and subjected to isocratic flushing with step-wise increases in f(c) cosolvent, TBA at fc=0.2 resulted in PCE mobilization, whereas acetone at fc相似文献   

Emission Factors of Air Toxics from Semiconductor Manufacturing in Korea

Abstract

The development of local, accurate emission factors is very important for the estimation of reliable national emissions and air quality management. For that, this study is performed for pollutants released to the atmosphere with source-specific emission tests from the semiconductor manufacturing industry. The semiconductor manufacturing industry is one of the major sources of air toxics or hazardous air pollutants (HAPs); thus, understanding the emission characteristics of the emission source is a very important factor in the development of a control strategy. However, in Korea, there is a general lack of information available on air emissions from the semiconductor industry. The major emission sources of air toxics examined from the semiconductor manufacturing industry were wet chemical stations, coating applications, gaseous operations, photolithography, and miscellaneous devices in the wafer fabrication and semiconductor packaging processes. In this study, analyses of emission characteristics, and the estimations of emission data and factors for air toxics, such as acids, bases, heavy metals, and volatile organic compounds from the semiconductor manufacturing process have been performed. The concentration of hydrogen chloride from the packaging process was the highest among all of the processes. In addition, the emission factor of total volatile organic compounds (TVOCs) for the packaging process was higher than that of the wafer fabrication process. Emission factors estimated in this study were compared with those of Taiwan for evaluation, and they were found to be of similar level in the case of TVOCs and fluorine compounds.     

Impact of temperature on juvenile growth and age at first egg-laying of the Pacific reef squid Sepioteuthis lessoniana reared in captivity

Cephalopod mollusks exhibit highly plastic life cycle traits influenced primarily by the interactive effects of food availability, light cycle and temperature, with the latter perhaps the most influential. Hatchlings of the tropical reef squid Sepioteuthis lessoniana were hatched from field-collected eggs in the laboratory and cultured at different temperatures to evaluate the effect of temperature on growth rates. All groups showed rapid, sustained growth rates from hatching to a size of 10–25 g. Beyond this size range, growth was slower and not clearly exponential in form. Growth rate was closely linked to temperature. Squids grown at approximately 27 °C attained a size of 10 g in as little as 45 days at sustained growth rates of 12.2% body weight day⁻¹ (%bw day⁻¹), while squids cultured at 20 °C required almost 100 days to attain the same size at rates of 5.7%bw day⁻¹. At an age of 55 days and approximately 1 g body weight, juvenile squids cultured at 20 °C were able to accelerate growth rates from 5.7%bw day⁻¹ to over 12%bw day⁻¹ when temperature was raised to 27 °C. They maintained this growth rate to a size of about 10 g and an age of at least 75 days post-hatching, indicating that body size and not age is the limiting factor for this rapid post-hatching growth. By comparison, conspecifics cultured near 27 °C from hatching had shifted out of the rapid post-hatching growth phase by day 50 at sizes between 10 and 50 g. The hatchlings from temperate to subtropical Japan had consistently higher growth rates at comparable temperatures than hatchlings from tropical Okinawa. When plotted as growth rate versus temperature, the Japanese group had a clearly higher slope to the relationship than the tropical populations, equivalent to a 2%bw day⁻¹ difference in growth rate at 25 °C. Age at first egg-laying was decreased at higher culture temperatures; however, overall life span was not. Received: 21 February 2000 / Accepted: 6 September 2000     

Exposure assessment of particulate matter and blood chromium levels in people living near a cement plant

This study evaluates the effect of air pollution caused by cement plants on nearby residential areas and performs an exposure assessment of particulate matter (PM) and total Cr, Cr⁶⁺, Pb, and Al. Further, the blood Cr levels of residents exposed to PM released by cement plants are also assessed. Nine buildings (eight residential and one elementary school building) close to cement plants were selected for this study, which were located in Pyeongtaek port, in west of Gyeonggi Province, South Korea. A total of 51 suspended particulate samples were collected at a flow rate of 2.0 L/min. Total Cr was more widely detected in residents’ houses and elementary schools. PM levels were higher at distances of 4.1 and 4.8 km than those at closer distances of 2.7 km. This was due to the influence of wind direction. The estimated mean blood level of Cr for the study participants was 3.80 μg/L, which is higher than levels estimated by other studies on Cr blood levels. Therefore, cement plants could cause an increase in total Cr and blood Cr levels in residential areas, and more continuous monitoring is necessary to better understand their impacts.