Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.     

Fate and movement of atrazine, cyanazine, metolachlor and selected degradation products in water resources of the deep Loess Hills of Southwestern Iowa, USA

The environmental fate and movement of herbicides widely used for weed control in corn are assessed for a deep loess soil in southwestern Iowa. Beginning in the early 1980s, the herbicide-based weed control program emphasized the application of atrazine (ATR) or cyanazine (CYN) and metolachlor (MET) for both broadleaf and grass control. Between 1992 and 1995, concentrations of ATR, desethylatrazine (DEA), desisopropylatrazine (DIA), CYN and MET were measured in rainwater, both shallow and deep vadose zone water, and well water. Results show that the frequency of herbicide detections and the range and distribution of occurrences are dependent upon both landscape position and temporal inputs of recharge water from rainfall. Generally, DIA was observed more frequently and in higher mean concentration in well water than DEA, while DEA was observed more frequently than DIA in vadose zone groundwater. A chromatographic analogy is suggested to explain the occurrence patterns observed for both parent herbicide and degradation products within the unsaturated zone water. Analysis of rainwater samples collected during this time also revealed low concentrations of ATR, CYN and MET, with the timing of the detections indicative of non-local transport. Results show that the deep loess soil conducts both water and agricultural chemicals relatively rapidly and as such represents a production system which is vulnerable to contamination of shallow groundwater by herbicide-derived chemicals. Results also illustrate the importance of including major herbicide degradation products in water resource impact assessment studies.     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

Biologie und Biochemie des Elements Selen

The importance of selenium as an essential trace element has progressively emerged during the last years due to the analysis of selenium deficiency diseases and to the identification and characterization of a number of selenoenzymes. Selenium is incorporated in the catalytic site of the enzymes as an integral selenocysteine residue. The pathway of selenocysteine biosynthesis and incorporation has been elucidated recently for Escherichia coli. This article presents an overview on these subjects and describes the mechanisms which confer selenocysteine specificity in the framework of protein biosynthesis. In addition, some considerations concerning the phylogeny of selenocysteine incorporation are presented and a model for the evolution of the selenocysteine pathway is proposed.     

Prenatal diagnosis of a true mosaic trisomy 20 substantiated by demonstration of a gene dosage effect for adenosine deaminase (ADA)

Fibroblasts from a fetus with the prenatal diagnosis of mosaic trisomy 20 were cloned by dilution plating. Adenosine deaminase (ADA), a biochemical marker for chromosome 20, was assayed in trisomic clones and normal clones as control. The cytogenetic diagnosis was substantiated by demonstration of a triplex gene dosage effect for ADA in the trisomic cells.