Polybrominated diphenyl ethers in various atmospheric environments of Taiwan: their levels, source identification and influence of combustion sources

In this study, ambient air samples from different atmospheric environments were examined for both PBDE and PCDD/F characteristics to verify that combustion is a significant PBDE emission source. The mean ± SD atmospheric PBDE concentrations were 165 ± 65.0 pg Nm⁻³ in the heavy steel complex area and 93.9 ± 24.5 pg Nm⁻³ in the metals complex areas, 4.7 and 2.7 times higher than that (35.3 ± 15.5 pg Nm⁻³) in the urban areas, respectively. The statistically high correlation (r = 0.871, p < 0.001) found between the atmospheric PBDE and PCDD/F concentrations reveals that the combustion sources are the most likely PBDE emission sources. Correspondence analysis shows the atmospheric PBDEs of the heavy steel and metals complex areas are associated with BDE-209, -203, -207, -208, indicative of combustion source contributions. Furthermore, the PBDEs in urban ambient air experience the influence of the evaporative releases of the commercial penta- and octa-BDE mixtures, as well as combustion source emissions. By comparing the PBDE homologues of indoor air, urban ambient air, and stack flue gases of combustion sources, we found that the lighter brominated PBDEs in urban ambient air were contributed by the indoor air, while their highly brominated ones were from the combustion sources, such as vehicles. The developed source identification measure can be used to clarify possible PBDE sources not only for Taiwanese atmosphere but also for other environmental media in other countries associated with various emission sources in the future.     

Microbial degradation of dissolved organic matter (DOM) and its influence on phenanthrene-DOM interactions

Microbial degradation-induced changes in the characteristics of dissolved organic matter (DOM), and the subsequent effects on phenanthrene-DOM interactions were investigated based on the microbial incubation of DOM collected from four different sources for 28 d. Partially biodegraded DOM presented higher specific UV absorbance (SUVA), lower protein-like fluorescence, higher humic-like fluorescence, lower aliphatic carbon fraction, and higher hydrophobic neutral fractions compared to the original DOM. Microbial changes in DOM led to an increase in the isotherm nonlinearity as well as the extent of phenanthrene binding. A negative relationship between SUVA and the Freundlich n values was established for the original and the biodegraded DOM, suggesting that aromatic condensed structures may play important roles in providing nonlinear strong binding sites irrespective of microbial degradation. In contrast, there were two separate slopes of the correlations between the percentage of hydrophobic acid (HoA) fraction and the n values for the original and the biodegraded DOM with a higher slope exhibited for the latter, implying that the microbial utilization of oxygen-containing structures in the HoA fractions may contribute to enhancing the associated isotherm nonlinearity.     

Fipronil toxicity in northern bobwhite quail Colinus virginianus: reduced feeding behaviour and sulfone metabolite formation

Fipronil is a phenyl pyrazole insecticide registered for agricultural use in many countries. Avian exposure to fipronil occurs mainly by ingesting contaminated insects or seeds. There is little information regarding the toxicological effects of fipronil in avian species and even less research documenting avian behavioural responses to fipronil ingestion. We examined the effects of a single oral dose of fipronil in northern bobwhite quail, the most fipronil-sensitive species tested to date, in respect to signs of intoxication and the metabolic fate of fipronil. Fipronil-treated birds did not eat or drink following pesticide administration, and as a result lost a significant amount of body mass. Treated birds also appeared withdrawn and did not respond to disturbance within the first hour after treatment. Identifiable signs of fipronil toxicity were not observed until at least 2d after treatment. Chemical analyses indicated a difference between fipronil and fipronil-sulfone residue distribution and bioaccumulation, with significantly higher (30- to 1000-fold) tissue concentrations of the sulfone detected at all time points from 8 to 96 h post-dose in brain, liver and adipose tissues. Tissue sulfone concentrations increased significantly in fipronil-treated birds, peaking at 72 h post-dose. Body mass decreased at all time points in dosed birds. The coincidence of the particular intoxication symptoms with the time course of rise in brain sulfone levels after fipronil dosing gives insight into possible mechanisms of toxicity in this highly sensitive species.     

Characteristics of metal contamination in paddy soils from three industrial cities in South Korea

Paddy soil contamination is directly linked to human dietary exposure to toxic chemicals via crop consumption. In Korea, rice paddy fields are often located around industrial complexes, a major anthropogenic source of metals. In this study, rice paddy soils were collected from 50 sites in three industrial cities to investigate the contamination characteristics and ecological risk of metals in the soils. The cities studied and their major industries are as follows: Ulsan (petrochemical, nonferrous, automobile, and shipbuilding), Pohang (iron and steel), and Gwangyang (iron and steel, nonmetallic, and petrochemical). Thirteen metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn) were analyzed using inductively coupled plasma–optical emission spectrometry (ICP–OES). The mean concentration of Cd (1.98 mg/kg) exceeded the soil quality guideline of Canada (1.4 mg/kg), whereas concentrations of other metals were under the standards of both Korea and Canada. Generally, levels of metal concentrations decreased with increasing distance from industrial complexes. Among the three cities, Pohang showed high concentrations of Zn (142.2 mg/kg), and Ulsan and Gwangyang showed high concentrations of Cr (33.9 mg/kg) and Ba (126.4 mg/kg), respectively. These contamination patterns were influenced by the different major industries of each city, which was clearly demonstrated by the principal component analysis results. Pollution indices suggested that As, Cd, Pb, and Zn were enriched in the paddy soils via anthropogenic activities. Comprehensive potential ecological risk indices were at considerable levels for most sites, especially because of major contributions from As and Cd, which can pose potential ecological threats.

     

Prediction of Cd toxicity to Daphnia magna in the mixture of multi-walled carbon nanotubes and kaolinite

In this study, we investigated cadmium toxicity created by adsorption kinetics in several mixtures containing two types of multi-walled carbon nanotubes (COOH-MWCNT and NH₂-MWCNT) and natural kaolinite. Characteristics of two types of MWCNTs were measured by zeta potential and ATR FT-IR graphs and TEM images. The solution of CNTs and kaolinite was tested to study Cd adsorption kinetics and mechanisms of differentiation-associated toxicity using Daphnia magna in a binary system (Cd–MWCNTs and Cd–kaolinite) and a ternary system (Cd–MWCNTs–kaolinite). In the binary system, Cd removal efficiency was nearly 100% and 40% for MWCNTs and kaolinite because of surface charge, respectively, with increasing sorbent concentration. In the ternary system, the trend of adsorption rate was similar to that of binary system. In comparison with percent mortality in the binary system, the solution in the ternary system showed higher toxicity due to the interaction of MWCNTs–kaolinite coagulated particles, thereby decreasing Cd adsorption onto CNTs and kaolinites. Overall, kaolinite can affect the adsorption process of Cd on MWCNTs in negative ways, depending on adsorption state. In conclusion, our studies suggest that kaolinite differs with adsorption ability of Cd by MWCNTs, and toxicity is likely to be produced by multivariable regression in the adsorption state.

     

Degradation of hexane and other recalcitrant hydrocarbons by a novel isolate, <Emphasis Type=Italic>Rhodococcus</Emphasis> sp. EH831

Background, aim, and scope  

Hexane, a representative VOC, is used as a solvent for extraction and as an ingredient in gasoline. The degradation of hexane by bacteria is relatively slow due to its low solubility. Moreover, the biodegradation pathway of hexane under aerobic conditions remains to be investigated; therefore, a study relating to aerobic biodegradation mechanisms is required. Consequently, in this study, an effective hexane degrader was isolated and the biodegradation pathway examined for the first time. In addition, the degradation characteristics of a variety of recalcitrant hydrocarbons were qualitatively and quantitatively investigated using the isolate.     

Emission estimation and congener-specific characterization of polybrominated diphenyl ethers from various stationary and mobile sources

Here we show that combustion sources, including waste incinerators, metallurgical processes, power-heating systems and so on, are also important emitters of polybrominated diphenyl ethers (PBDEs) to the atmosphere. Geometric mean PBDE concentrations in the stack flue gases of the combustion sources ranged from 8.07 to 469 ng/Nm³. The sinter plants (24.7 mg/h), electric arc furnaces (EAFs) (11.3 mg/h) and power plants (50.8 mg/h) possessed the largest PBDE emission rates, which were several orders higher than those of the other reported sources. The occurrences of the PBDEs in the flue gases of the power plants and vehicles, as well as their PBDE concentrations statistically highly correlated with combustion-originated PCDD/Fs, revealing that PBDEs should be the products of combustion. The ranking of major PBDE emission sources in Taiwanese PBDE inventory for combustion sources was power plants (30.85 kg/year), vehicles (14.9 kg/year) and metallurgical processes (5.88 kg/year).     

Anthropogenic mercury emission inventory with emission factors and total emission in Korea

Mercury emissions concentrations, emission factors, and the total national emission from major anthropogenic sources in Korea for the year 2007 were estimated. Uncontrolled and controlled mercury emission factors and the total emission from each source types are presented. The annual national mercury emission from major anthropogenic sources for the year 2007, on average was 12.8 ton which ranged from 6.5 to 20.2 ton. Averaged emissions of elemental, oxidized, and particulate mercury were estimated at 8.25 ton, 3.69 ton, and 0.87 ton, respectively. Due to the removal of a major portion of particulate and oxidized mercury species, elemental mercury was dominant in stack emission. About 54.8% of mercury emission was contributed by industrial sources, 45.0% by stationary combustion sources and 0.02% by mobile sources. Thermal power plants, oil refineries, cement kilns and incinerators (municipal, industrial, medical, sewage sludge) were the major mercury emitters, contributing about 26%, 25%, 21% and 20%, respectively to the total mercury emission. Other sources (crematory, pulp and paper manufacturing, nonferrous metals manufacturing, glass manufacturing) contributed about 8% of the total emission. Priority should be given in controlling mercury emissions from coal-fired power plants, oil refineries, cement kilns and waste incinerators. More measurements including natural and re-emission sources are to be carried out in the future in order to have a clear scenario of mercury emission from the country and to apply effective control measures.