Evaluation of non-point source pollution reduction by applying Best Management Practices using a SWAT model and QuickBird high resolution satellite imagery

This study evaluated the reduction e ect of non-point source pollution by applying best management practices (BMPs) to a 1.21 km2 small agricultural watershed using a SWAT (Soil andWater Assessment Tool) model. Two meter QuickBird land use data were prepared for the watershed. The SWAT was calibrated and validated using daily streamflow and monthly water quality (total phosphorus (TP), total nitrogen (TN), and suspended solids (SS)) records from 1999 to 2000 and from 2001 to 2002. The average Nash and Sutcli e model e ciency was 0.63 for the streamflow and the coe cients of determination were 0.88, 0.72, and 0.68 for SS, TN, and TP, respectively. Four BMP scenarios viz. the application of vegetation filter strip and riparian bu er system, the regulation of Universal Soil Loss Equation P factor, and the fertilizing control amount for crops were applied and analyzed.     

Control of petroleum-hydrocarbon contaminated groundwater by intrinsic and enhanced bioremediation

In the first phase of this study, the e ectiveness of intrinsic bioremediation on the containment of petroleum hydrocarbons was evaluated at a gasoline spill site. Evidences of the occurrence of intrinsic bioremediation within the BTEX (benzene, toluene, ethylbenzene, and xylenes) plume included (1) decreased BTEX concentrations; (2) depletion of dissolved oxygen (DO), nitrate, and sulfate; (3) production of dissolved ferrous iron, methane, and CO2; (4) deceased pH and redox potential; and (5) increased methanogens, total heterotrophs, and total anaerobes, especially within the highly contaminated areas. In the second phase of this study, enhanced aerobic bioremediation process was applied at site to enhance the BTEX decay rates. Air was injected into the subsurface near the mid-plume area to biostimulate the naturally occurring microorganisms for BTEX biodegradation. Field results showed that enhanced bioremediation process caused the change of BTEX removal mechanisms from anaerobic biodegradation inside the plume to aerobic biodegradation. This variation could be confirmed by the following field observations inside the plume due to the enhanced aerobic bioremediation process: (1) increased in DO, CO2, redox potential, nitrate, and sulfate, (2) decreased in dissolved ferrous iron, sulfide, and methane, (3) increased total heterotrophs and decreased total anaerobes. Field results also showed that the percentage of total BTEX removal increased from 92% to 99%, and the calculated total BTEX first-order natural attenuation rates increased from 0.0092% to 0.0188% per day, respectively, after the application of enhanced bioremediation system from the spill area to the downgradient area (located approximately 300 m from the source area).     

Isolation,identification, Pb(Ⅱ) biosorption isotherms and kinetics of a lead adsorbing Penicillium sp. MRF-1 from South Korean mine soil

A heavy metal contaminated soil sample collected from a mine in Chonnam Province of South Korea was found to be a source of heavy metal adsorbing biosorbents. Chemical analyses showed high contents of lead (Pb) at 357 mg/kg and cyanide (CN) at 14.6 mg/kg in the soil. The experimental results showed that Penicillium sp. MRF-1 was the best lead resistant fungus among the four individual metal tolerant fungal species isolated from the soil. Molecular characterization of Penicillium sp. MRF-1 was determined using ITS regions sequences. E ects of pH, temperature and contact time on adsorption of Pb(II) by Penicillium sp. MRF-1 were studied. Favorable conditions for maximum biosportion were found at pH 4 with 3 hr contact time. Biosorption of Pb(II) gradually increased with increasing temperature. E cient performance of the biosorbent was described using Langmuir and Freundlich isotherms. Adsorption kinetics was studied using pseudo first-order and pseudo second-order models. Biosorbent Penicillium sp. MRF-1 showed the maximum desorption in alkali conditions. Consistent adsorption/desorption potential of the biosorbent in repetitive cycles validated the e cacy of it in large scale. SEM studies given notes on surface modification of fungal biomass under metal stress and FT-IR results showed the presence of amino groups in the surface structure of the biosorbent. In conclusion, the new biosorbent Penicillium sp. MRF-1 may potentially be used as an inexpensive, easily cultivatable material for the removal of lead from aqueous solution.     

Technology and teen drivers

The rapid evolution of computing, communication, and sensor technology is likely to affect young drivers more than others. The distraction potential of infotainment technology stresses the same vulnerabilities that already lead young drivers to crash more frequently than other drivers. Cell phones, text messaging, MP3 players, and other nomadic devices all present a threat because young drivers may lack the spare attentional capacity for vehicle control and the ability to anticipate and manage hazards. Moreover, young drivers are likely to be the first and most aggressive users of new technology. Fortunately, emerging technology can also support safe driving. Electronic stability control, collision avoidance systems, intelligent speed adaptation, and vehicle tracking systems can all help mitigate the threats to young drivers. However, technology alone is unlikely to make young drivers safer. One promising approach to tailoring technology to teen drivers is to extend proven methods for enhancing young driver safety. The success of graduated drivers license programs (GDL) and the impressive safety benefit of supervised driving suggest ways of tailoring technology to the needs of young drivers. To anticipate the effects of technology on teen driving it may be useful to draw an analogy between the effects of passengers and the effects of technology. Technology can act as a teen passenger and undermine safety or it can act as an adult passenger and enhance safety. Impact on industry: Rapidly developing technology may have particularly large effects on teen drivers. To maximize the positive effects and minimize the negative effects will require a broad range of industries to work together. Ideally, vehicle manufacturers would work with infotainment providers, insurance companies, and policy makers to craft new technologies so that they accommodate the needs of young drivers. Without such collaboration young drivers will face even greater challenges to their safety as new technologies emerge.     

Geo-spatial and log-linear analysis of pedestrian and bicyclist crashes involving school-aged children

PROBLEM: There is a growing concern with the safety of school-aged children. This study identifies the locations of pedestrian/bicyclist crashes involving school-aged children and examines the conditions when these crashes are more likely to occur. METHOD: The 5-year records of crashes in Orange County, Florida where school-aged children were involved were used. The spatial distribution of these crashes was investigated using the Geographic Information Systems (GIS) and the likelihoods of crash occurrence under different conditions were estimated using log-linear models. RESULTS: A majority of school-aged children crashes occurred in the areas near schools. Although elementary school children were generally very involved, middle and high school children were more involved in crashes, particularly on high-speed multi-lane roadways. Driver's age, gender, and alcohol use, pedestrian's/bicyclist's age, number of lanes, median type, speed limits, and speed ratio were also found to be correlated with the frequency of crashes. DISCUSSION: The result confirms that school-aged children are exposed to high crash risk near schools. High crash involvement of middle and high school children reflects that middle and high schools tend to be located near multi-lane high-speed roads. IMPACT ON INDUSTRY: The pedestrian's/bicyclist's demographic factors and geometric characteristics of the roads adjacent to schools associated with school children's crash involvement are of interest to school districts.     

Transfer of 90Sr to rice plants after its acute deposition onto flooded paddy soils

The transfer of 90Sr to rice plants following its acute ground deposition was examined experimentally in a greenhouse. Lysimeters were flooded after being filled with the soil monoliths from 12 paddy fields. A solution of 90Sr was applied to the standing water in the flooded lysimeters at the pre-transplanting stage or booting stage. Applied 90Sr was mixed with the topsoil only after the pre-transplanting application (PTA). The transfer was quantified with the areal transfer factor (TF(a), m2 kg(-1)-dry) defined as the ratio of the plant concentration to the initial ground deposition. In the PTA, the first-year TF(a) values in the 12 soils were in the range of 8.2 x 10(-3) -2.1 x 10(-2) and 1.7 x 10(-4) -3.6 x 10(-4) for the straws and hulled seeds, respectively. The TF(a) values from the booting-stage application (BSA) were higher than those from the PTA by a factor of up to four. The ratios of the seed TF(a) to the straw TF(a) were, on the whole, higher in the BSA. The 90Sr TF(a) in the PTA was negatively correlated with the soil pH and, to a lesser degree, the exchangeable Ca content. In the second year, the TF(a) in the PTA reduced to 53-90% of that in the first year. A more significant reduction, in general, occurred in a sandier soil. Based on the four consecutive years' transfer data, an overall half-time of the 90Sr TF(a) was estimated to be 2.2 years.     

Applying model simulation and photochemical indicators to evaluate ozone sensitivity in southern Taiwan

Ozone sensitivity was investigated using CAMx simulations and photochemical indicator ratios at three sites (Pingtung City, Chao- Chou Town, and Kenting Town) in Pingtung County in southern Taiwan during 2003 and 2004. The CAMx simulations compared fairly well with the hourly concentrations of ozone. Simulation results also showed that Pingtung City was mainly a volatile organic compounds (VOC)-sensitive regime, while Chao-Chou Town was either a VOC-sensitive or a NOx-sensitive regime, depending on the seasons. Measurements of three photochemical indicators (H2O2, HNO3, and NOy) were conducted, and simulated three transition ranges of H2O2/HNO3 (0.5–0.8), O3/HNO3 (10.3–16.2) and O3/NOy (5.7–10.8) were adopted to assess the ozone sensitive regime at the three sites. The results indicated that the three transition ranges yield consistent results with CAMx simulations at most times at Pingtung City. However, both VOC-sensitive and NOx-sensitive regimes were important at the rural site Chao-Chou Town. Kenting Town, a touring site at the southern end of Taiwan, was predominated by a NOx-sensitive regime in four seasons.     

Vaporization reduction characteristics of aqueous ammonia solutions by the addition of ethylene glycol, glycerol and glycine to the CO2 absorption process

Aqueous ammonia (NH₃) solution can be used as an alternative absorption for the control of CO₂ emitted from flue gases due to its high absorption capacity, fast absorption rate and low corrosion problem. The emission of CO₂ from iron and steel plants requires much attention, as they are higher than those emitted from power plants at a single point source. In the present work, low concentration ammonia liquor, 9 wt.%, was used with various additives to obtain the kinetic properties using the blast furnace gas model. Although a solution with a high ammonia concentration enables high CO₂ absorption efficiency, ammonium ions are lost as ammonia vapor, resulting in reduced CO₂ absorption due to the lower concentration of the ammonia absorbent. To decrease the vaporization of ammonia, ethylene glycol, glycerol and glycine, which contain more than one hydroxyl radical, were chosen. The experiments were conducted at 313 K similar to the CO₂ absorption conditions for the blast furnace gas model.     

Understanding why consumers in China switch between wild,farmed, and synthetic bear bile products

An important rationale for legally farmed and synthetic wildlife products is that they reduce illegal, wild-sourced trade by supplying markets with sustainable alternatives. For this to work, more established illegal-product consumers must switch to legal alternatives than new legal-product consumers switch to illegal wild products. Despite the widespread debate on the magnitude and direction of switching, studies among actual consumers are lacking. We used an anonymous online survey of 1421 traditional Chinese medicine consumers in China to investigate switching among legal farmed, synthetic, and illegal wild bear bile. We examined the past consumption behavior, applied a discrete choice experiment framed within worsening hypothetical disease scenarios, and used latent class models to investigate groups with shared preferences. Bear bile consumers (86% respondents) were wealthier, more likely to have family who consumed bile, and less knowledgeable about bile treatments than nonconsumers. Consumer preferences were heterogenous, but most consumer preferences switched between bile types as disease worsened. We identified five distinct latent classes within our sample: law-abiding consumers (34% respondents), who prefer legal products and were unlikely to switch; two all-natural consumer groups (53%), who dislike synthetics but may switch between farmed and wild; and two nonconsumer groups (12%), who prefer not to buy bile. People with past experience of bile consumption had different preferences than those without. Willingness to switch to wild products was related to believing they were legal, although the likelihood of switching was mediated by preferences for cheaper products sold in legal, familiar places. We found that consumers of wild bile may switch to legal alternatives, given the availability of a range of products, whereas legal-product consumers may switch to illegal products if the barriers to doing so are small. Understanding preferences that promote or impede switching should be a key consideration when attempting to predict consumer behavior in complex wildlife markets.     

Alternatives for treatment and disposal cost reduction of regulated medical wastes

Many hospitals or health care facilities have faced financial difficulties and thus they have attempted to find cost-effective treatment and disposal methods of their regulated medical wastes (RMWs). This study investigated generation volume and sources, composition, and treatment and disposal methods for RMWs obtained from three out of the five typical city hospitals in Massachusetts for which we could obtain relevant data on medical waste. Also, this study compared the generation patterns and amounts of RMWs between the hospital and the medical school. The yearly operational treatment and disposal costs of RMWs based on different treatment and disposal methods were analyzed for one hospital. The most cost-effective option of four different treatment and disposal options studied was to combine on-site incineration and microwave technologies. Finally, this study identified measures for the effective waste characterization methods for the reduction of treatment and disposal costs of RMWs. By careful exclusion of non-RMW from RMW waste streams, hospitals can reduce the RMW volume that requires special treatment and reduce disposal costs.