Intercomparison of reactive transport models applied to UO2 oxidative dissolution and uranium migration

Oxidative dissolution of uranium dioxide (UO₂) and the subsequent migration of uranium in a subsurface environment and an underground waste disposal have been simulated with reactive transport models. In these systems, hydrogeological and chemical processes are closely entangled and their interdependency has been analyzed in detail, notably with respect to redox reactions, kinetics of mineralogical evolution and hydrodynamic migration of species of interest.Different codes, where among CASTEM, CHEMTRAP and HYTEC, have been used as an intercomparison and verification exercise. Although the agreement between codes is satisfactory, it is shown that the discretization method of the transport equation (i.e. finite elements (FE) versus mixed-hybrid FE and finite differences) and the sequential coupling scheme may lead to systematic discrepancies.     

Water-soluble aerosol and visibility degradation in Hong Kong during autumn and early winter, 1998.

During the October-December 1998 period, 30 daily samples of size-separated airborne respirable suspended particulates (RSP) were collected at the quasi-rural Kadoorie Agricultural Research Centre (KARC) in central New Territories (NT), Hong Kong, Special Administrative Region (SAR). Results of analysis indicate that sulphate is the predominant water-soluble species, and that sulphate, nitrate and ammonium together contribute to most of the total water-soluble fine aerosol mass. An interesting result obtained through principal component analysis (PCA) following varimax rotation of the bivariate correlation matrix for water-soluble species is that the first component (PCl) is made up exclusively of SO4 and NH4 ions. The stoichiometric ratio and correlation coefficient between the two ions suggest that ammoniated sulphate compounds are the probable species responsible for the PCI. Further, the use of a linear multivariate visibility model which accommodates the effect of relative humidity (RH) shows that SO4 and NH4 are the only anions important in visibility degradation. It is found that SO4 in aerosol at the KARC can be used to predict the visual range (or extinction coefficient) recorded from Kings Park, Kowloon, approximately 10 km away. This result suggests that SO4 (and possibly NH4) is, generally, likely to be of regional rather than of local origin. Further observations suggest that the model is most applicable to a moderate visual range, 10 km < R(v) < or = 20 km under a rather broad range of ambient relative humidity, 40% < RH < or = 80. However, this inference does not preclude the contributions to visibility degradation--mostly by absorption--by some of the water-insoluble aerosol constituents, including carbon, or the pollutant gas, NO2.     

Lead,zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l(-1) Pb, 2.5, 5, 10, 20 and 30 mg (l-1) Zn, or 0.25, 0.50, 1 and 2 mg l(-1) Cu for 14 days, respectively, then tolerance index (TI) and EC50 (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu.     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.     

Determination of source contributions to ambient PM2.5 in Kaohsiung, Taiwan, using a receptor model

Ambient particulates of PM2.5 were sampled at three sites in Kaohsiung, Taiwan, during February and March 1999. In addition, resuspended PM2.5 collected from traffic tunnels, paved roads, fly ash of a municipal solid waste (MSW) incinerator, and seawater was obtained. All the samples were analyzed for twenty constituents, including water-soluble ions, organic carbon (OC), elemental carbon (EC), and metallic elements. In conjunction with local source profiles and the source profiles in the model library SPECIATE EPA, the receptor model based on chemical mass balance (CMB) was then applied to determine the source contributions to ambient PM2.5. The mean concentration of ambient PM2.5 was 42.69-53.68 micrograms/m3 for the sampling period. The abundant species in ambient PM2.5 in the mass fraction for three sites were OC (12.7-14.2%), SO4(2-) (12.8-15.1%), NO3- (8.1-10.3%), NH4+ (6.7-7.5%), and EC (5.3-8.5%). Results of CMB modeling show that major pollution sources for ambient PM2.5 are traffic exhaust (18-54%), secondary aerosols (30-41% from SO4(2-) and NO3-), and outdoor burning of agriculture wastes (13-17%).     

Distribution characteristics of PCBs in the sediments of the lower Nakdong River, Korea

The objective of this study is to investigate the distribution characteristics of polychlorinated biphenyl (PCB) congeners in sediments of the lower Nakdong River of Korea. The sediments were collected using a grab sampler in May 1999. PCBs were extracted in the Soxhlet extractor and cleaned by using adsorption chromatographic techniques and concentrated sulfuric acid. A HP6890 gas chromatograph equipped with an electron capture detector was used for quantification. The results of congener specific analysis showed that the total concentration is ranged over 1.1-141 ng/g dry weight. The levels of PCB congeners are significantly correlated with the total organic carbons (TOC) in the sediments. The major fractions of PCBs in these sediments are congeners containing 4, 5 or 6 chlorine atoms per biphenyl molecule.     

Biodegradation of 2,4,6-trichlorophenol in the presence of primary substrate by immobilized pure culture bacteria

In this study, pure strains that are capable of utilizing 2,4,6-trichlorophenol have been isolated from the mixed culture grown on substrates containing chlorophenolic compounds. Studies have been carried out on the capability of these isolated pure strains in suspended and immobilized forms to decompose 2,4,6-trichlorophenol. Additionally, the influence of primary substrates (e.g., phenol, 2-chlorophenol, 3-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol) on the decomposition of 2,4,6-trichlorophenol by the isolated pure strains grown in immobilized form is also investigated. The results are: Through bacterial isolation and identification, three pure strains have been obtained: Pseudomonas spp. strain 01, Pseudomonas spp. strain 02 and Agrobacterium spp. Whether in suspended or immobilized forms, all strains have poor removal efficiencies of 2,4,6-trichlorophenol. However, addition of 200 mg/l phenol will enable the immobilized Pseudomonas spp. strain 01, and Pseudomonas spp. strain 02 to achieve 65% and 48% removal of 2,4,6-trichlorophenol, respectively. Addition of phenol will assist the immobilized Pseudomonas spp. strain 02 in achieving removal of 2,4,6-trichlorophenol but the removal efficiency is not good if the phenol concentration is too low. The optimum phenol concentration should be between 200 and 400 mg/l.     

On-road motor vehicle emissions and fuel consumption in urban driving conditions

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NOx, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Indoor and outdoor air quality investigation at schools in Hong Kong

Five classrooms in Hong Kong (HK), air-conditioned or ceiling fans ventilated, were chosen for investigation of indoor and outdoor air quality. Parameters such as temperature, relative humidity (RH), carbon dioxide (CO2), sulphur dioxide (SO2), nitric oxide (NO), nitrogen dioxide (NO2), respirable particulate matter (PM10), formaldehyde (HCHO), and total bacteria counts were monitored indoors and outdoors simultaneously. The average respirable particulate matter concentrations were higher than the HK Objective, and the maximum indoor PM10 level exceeded 1000 microg/m3. Indoor CO2 concentrations often exceeded 1000 microl/l in air-conditioning and ceiling fan classrooms, indicating inadequate ventilation. Maximum indoor CO2 level reached 5900 microl/l during class at the classroom with cooling tower ventilation. Increasing the rate of ventilation or implementation of breaks between classes is recommended to alleviate the high CO2 level. Other pollution parameters measured in this study complied with the standards. The two most important classroom air quality problems in Hong Kong were PM10 and CO2 levels.     

Genotoxicity of two novel pesticides for the earthworm, Eisenia fetida

In this paper, several studies were conducted to evaluate the genotoxicity of two pesticides, Imidacloprid and RH-5849, for earthworm (Eisenia fetida). Earthworms were exposed in different exposure systems to evaluate their acute toxicity and the genotoxicity of the two pesticides was evaluated by using the method of sperm deformity assessment, micronucleus test of root tip cells in Vicia faba, a mouse bone-marrow micronucleus test, and comet assay. LC(50) (interpolated concentration at which 50% mortality of test population occurs) for earthworms varied in different exposure systems. The results indicated that Imidacloprid was consistently more toxic than RH-5849 in all exposure systems. In this study, sperm deformity test was used to detect the potential adverse influences of pesticides on the reproduction of earthworms. The results demonstrated that significant induction of sperm deformity (p<0.01) and a dose-effect relationship displayed at Imidacloprid concentrations higher than 0.5 mg/kg dry soil. However, the sperm deformity frequency of groups exposed to RH-5849 did not show significant difference (p>0.05) from the control until the dose reached 100 mg/kg dry soil. The results of the V. faba micronucleus tests showed that micronuclei frequency of the exposed group did not show significant difference (p>0.05) from the control until the concentration of Imidacloprid and RH-5849 reached 100 mg/ml. The results of the mouse bone-marrow micronuclei test also indicate that two pesticides did not show significant effects (p>0.05) on the micronuclei frequency in mice bone-marrow cells until the dose reached 100 mg/kg for Imidacloprid and 300 mg/kg for RH-5849 (2/3 LD(50)). Although no genotoxicity was detected by using the micronucleus tests, the results of the comet assay showed that the two pesticides induce significant DNA damage (p<0.01) in earthworms and dose-effect relationships were displayed. The 'earthworm comet assay' is a rapid and sensitive way to screen chemicals or terrestrial environments for their DNA-damaging properties.