铬渣的热解无害化处理

采用热解工艺无害化处理铬渣,探讨了稻秆在铬渣无害化处理中的作用.研究了热解温度、稻秆与铬渣质量比、铬渣粒径及保温时间对铬渣热解无害化处理的影响,并分析了热解前后热解产物中铬元素形态的变化.结果表明,热解工艺能有效地将铬渣中Cr(Ⅵ)还原,稻秆热解过程中产生的气相挥发分对Cr(Ⅵ)的还原起核心作用.较为适宜的热解条件:热解温度为400 ℃,稻秆与铬渣质量比为0.10,铬渣粒径<2 000 μm,保温时间为10 min.在该热解条件处理下,热解产物中的Cr(Ⅵ)质量浓度为121 mg/kg,低于热解前铬渣中的Cr(Ⅵ)(3 400 mg/kg).热解后,可交换态及碳酸盐结合态铬含量降低,大部分铬转化成了稳定的有机结合态和残渣态,极大地降低了铬渣的危害.第一作者:张大磊,男,1982生,博士研究生,研究方向为固体废弃物热处理.     

加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

粉状活性焦在双层滤料颗粒床中的脱硫试验研究

在双层滤料颗粒床模型试验台上对粒径为300～400目的粉状活性焦进行了脱硫试验,研究了温度、O2和水蒸气体积分数、气体流速、再生次数对脱硫效果的影响.试验结果表明.温度为120℃、O2体积分数为8%、水蒸气体积分数为10%条件下,脱硫效果最好;粉状活性焦在双层滤料颗粒床中经过7次重复吸附.达到硫饱和吸附量为66.2 mg/g.粉状活性焦再生试验表明,随着再生次数的增加.粉状活性焦的脱硫性能呈下降趋势.     

饮用水生物处理中微生物量和活性的测定方法

微生物量和微生物活性是饮用水生物处理工艺设计与运行的重要参数。总结论述了适用于表示饮用水生物处理过程生物膜中微生物数量和活性的几种主要指标的测定方法。     

高岭土对不同污染物微滤过程的影响

本研究采用原子力显微镜(AFM)结合自制的膜探针以及Zeta电位仪通过分别测量不同有机污染物,即腐殖酸(HA)、牛血清蛋白(BSA)和海藻酸钠(SA)与微滤膜之间的粘附力以及相应污染物的Zeta电位,对高岭土在不同有机物微滤过程的影响进行了系统性研究。结果表明,高岭土对污染膜通量衰减的影响主要发生在膜过滤的初期阶段,其存在使HA污染膜的初期通量衰减幅度增加,BSA和SA污染膜的初期通量衰减幅度减缓;清洗后HA污染膜的通量恢复率降低,而BSA和SA污染膜的通量恢复率增大。而且,高岭土的存在使膜-HA之间的粘附力变大以及HA溶液的Zeta电位变小,膜-BSA、SA之间的粘附力变小以及相应污染物的Zeta电位都增大。因此,膜-污染物之间粘附力以及溶液的Zeta电位的变化可以指示膜污染的变化趋势。     

Heavy metal and Pb isotopic compositions of aquatic organisms in the Pearl River Estuary, South China

The accumulation of trace metals in aquatic organisms may lead to serious health problems through the food chain. The present research project aims to study the accumulation and potential sources of trace metals in aquatic organisms of the Pearl River Estuary (PRE). Four groups of aquatic organisms, including fish, crab, shrimp, and shellfish, were collected in the PRE for trace metal and Pb isotopic analyses. The trace metal concentrations in the aquatic organism samples ranged from 0.01 to 2.10 mg/kg Cd, 0.02 to 4.33 mg/kg Co, 0.08 to 4.27 mg/kg Cr, 0.15 to 77.8 mg/kg Cu, 0.17 to 31.0 mg/kg Ni, 0.04 to 30.7 mg/kg Pb, and 8.78 to 86.3 mg/kg Zn (wet weight). High concentrations of Cd were found in crab, shrimp and shellfish samples, while high concentration of Pb was found in fish. In comparison with the baseline reference values in other parts of the world, fish in the PRE had the highest elevated trace metals. The results of Pb isotopic compositions indicated that the bioaccumulation of Pb in fish come from a wide variety of food sources and/or exposure pathways, particularly the anthropogenic inputs.     

1994年江淮伏旱及其影响研究

利用江谁地区18个站点1951～1995年6～8月降水量资料,用Z指数建立了历年夏季旱涝序列,着重对1994年江淮伏旱及其对农业、水资源的影响进行了分析评述,获得了一些有意义的结论。     

水稻生产气象灾害危险性分析：—以湖南省常德市水稻生产为例

本文通过对研究区水稻气象灾害规律的研究和危险性评价,计算了不同等级的水稻综合风险率,为保险部门制定水稻保险费率提供了科学依据.     

地震科技人员开发能力的灰色关联分析

应用灰色系统理论，根据江苏省地震工程研究院的地震科技开发资料，分别以项目负责人的年龄、学历、职称、职务、学科作为比较数列，对年度内完成的实际合同额进行了多因素灰色关联分析，排出了关联序。研究结果客观地揭示了开发能力与人的各种因素——年龄、学历、职称、职务、学科之间的相互关系，为市场经济条件下，地震科技人才的开发、培养和应用，提供了科学依据。     

Thermogravimetric analysis and kinetic study on pyrolysis of representative medical waste composition

To obtain detailed information on the pyrolysis characteristics, a thermogravimetric study on the pyrolysis of 14 typical medical waste compositions was carried out in thermogravimetric analysis (TGA) equipment using dynamic techniques in a stream of N(2). An index representing pyrolysis reactivity of waste was presented. Kinetic parameters were obtained by Coats-Redfern method and used to model the TG curve. The results showed that: (a) Plastic, protein, cellulosic material, synthetic fibre, and rubber entered pyrolysis process in succession. (b) There was one decomposition stage in the pyrolysis of one-off medical glove, operating glove, cellulosic waste, absorbable catgut suture and adhesive plaster, while other components had two obvious weight loss stages. (c) The obtained apparent activation energy for second stage pyrolysis was comparably higher than that for first stage. (d) Each stage was controlled by only one kinetic mechanism, in which kinetic parameters were constant. (e) The degradation kinetics of medical waste may be affected by special physical and chemical treatment in the product manufacturing process. (f) Among 13 waste samples, the pyrolysis index of cellulosic matter was the highest, which indicated cellulosic matter had strong pyrolysis reactivity. (g) With increasing heating rate, TG curve and DTG peak shifted to high temperatures and main reaction interval of the sample became longer.