The Sensitivity of PM25 Source-Receptor Relationships to Atmospheric Chemistry and Transport in a Three-Dimensional Air Quality Model

ABSTRACT

Air quality model simulations constitute an effective approach to developing source-receptor relationships (so-called transfer coefficients in the risk analysis framework) because a significant fraction of particulate matter (particularly PM_2.5) is secondary (i.e., formed in the atmosphere) and, therefore, depends on the atmospheric chemistry of the airshed. In this study, we have used a comprehensive three-dimensional air quality model for PM_{2 5} (SAQM-AERO) to compare three approaches to generating episodic transfer coefficients for several source regions in the Los Angeles Basin. First, transfer coefficients were developed by conducting PM_2.5 SAQM-AERO simulations with reduced emissions of one of four precursors (i.e., primary PM, sulfur dioxide (SO₂), oxides of nitrogen (NO_x), and volatile organic compounds) from each source region. Next, we calculated transfer coefficients using two other methods: (1) a simplified chemistry for PM_2.5 formation, and (2) simplifying assumptions on transport using information limited to basin-wide emission reductions. Transfer coefficients obtained with the simplified chemistry were similar to those obtained with the comprehensive model for VOC emission changes but differed for NO and SO emission changes. The differences were due to the parameterization of the rates of secondary PM formation in the simplified chemistry. In 90% of the cases, transfer coefficients estimated using only basin-wide information were within a factor of two of those obtained with the explicit source-receptor simulations conducted with the comprehensive model. The best agreement was obtained for VOC emission changes; poor agreement was obtained for primary PM_2.5.     

Identifying potential receptors and routes of contaminant exposure in the traditional territory of the Ouje-Bougoumou Cree: Land use and a geographical information system

Great concern has been raised with respect to the 13 traplines that constitute the traditional territory of the Ouje-Bougoumou Cree located in the James Bay region of northern Quebec, Canada, with respect to mine wastes originating from three local mines. As a result, an “Integrative Risk Assessment” was initiated consisting of three interrelated components: a comprehensive human health study, an assessment of the existing ecological/environmental database, and a land use/potential sites of concern study. In this paper, we document past and present land use in the traditional territory of the Ouje-Bougoumou Cree for 72 heads of households, including 13 tallymen, and use a Geographic Information System (GIS) to layer harvest/hunting and gathering/collecting data over known mining areas and potential sites of concern. In this way, potential receptors of contamination and routes of human exposure were identified. Areas of overlap with respect to land use activity and mining operations were relatively extensive for certain harvesting activities (e.g., beaver, Castor canadensis and various species of game birds), less so for fish harvesting (all species) and water collection, and relatively restrictive for large mammal harvesting and collection of firewood (and other collection activities). Potential receptors of contaminants associated with mining activity (e.g., fish and small mammals) and potential routes of exposure (e.g., ingestion of contaminated game and drinking of contaminated water) were identified.     

Fate and toxicity of endosulfan in Namoi River water and bottom sediment

Endosulfan (6,7,8,9,10,10,-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,4,3-benzodioxathiepine-3-oxide) sorption (standardized to 1% total organic carbon and dry weight) was significantly (P < 0.05) more concentrated on the large (>63 microm) particle fraction compared with smaller size fractions (<5 microm and 5-24 microm) of bottom sediments from the Namoi River, Australia. Following completion of the particle size fractionation (6 to 12 wk) and a sediment toxicity assessment (2 wk), the sediments showed large decreases in concentrations of alpha-endosulfan that coincided with an increase in endosulfan sulfate concentrations and minimal changes in beta-endosulfan concentrations. In the Namoi River, similar patterns were observed in the composition of total endosulfan in monthly measurements of bottom sediments and in passive samplers placed in the water column following runoff from cotton (Gossypium hirsutum L.) fields. The toxicity of endosulfan sulfate in river water indicated by the nymphs of the epibenthic mayfly Jappa kutera, was more persistent than the alpha- and beta-endosulfan parent isomers due to its longer half-life. This suggests that endosulfan sulfate would contribute most to previously observed changes in population densities of aquatic biota. Measured concentrations of total endosulfan in river water of up to 4 microg L(-1) following storm runoff, exceed the range of the 96-h median lethal concentration (LC50) values in river water for both alpha-endosulfan (LC50 = 0.7 microg L(-1); 95% confidence interval [CI] = 0.5 to 1.1) and endosulfan sulfate (LC50 = 1.2 microg L(-1); 95% CI = 0.4 to 3.3). In contrast, the 10-d LC50 value for total endosulfan in the sediment toxicity test (LC50 = 162 microg kg(-1); 95% CI = 120 to 218 microg kg(-1)) was more than threefold higher than the highest measured concentration of total endosulfan in field samples of bottom sediment (48 microg kg(-1)). This suggests that pulse exposures of endosulfan in the water column following storm runoff may be more acutely toxic to riverine biota than in contaminated bottom sediment.     

Insights on the solubilization products after combined alkaline and ultrasonic pre-treatment of sewage sludge

This work provides insights on the solubilization products after a simultaneous combination of alkaline and ultrasonic (ALK + ULS) pre-treatment of sewage sludge. Soluble chemical oxygen demand (SCOD) increased from 1200 to 11,000 mg/L after such treatment. Organics with molecular weight around 5.6 kDa were solubilized because of the synergistic effect of ultrasound and alkali. Organics with molecular weight larger than 300 kDa increased from 7.8% to 60%, 16% and 42.3% after ULS, ALK and ALK + ULS treatment, respectively. Excitation emission matrix fluorescence spectroscopy analysis identified soluble microbial product-like and humic acid-like matters as the main solubilization products. Sludge anaerobic biodegradability was significantly enhanced with the simultaneous application of ALK + ULS pre-treatment. ALK + ULS pre-treatment resulted in 37.8% biodegradability increase compared to the untreated sludge. This value was higher compared to the biodegradability increase induced by individual ALK pre-treatment (5.7%) or individual ULS pre-treatment (20.7%) under the same conditions applied.     

Simulation of solute transport across low-permeability barrier walls

Low-permeability, non-reactive barrier walls are often used to contain contaminants in an aquifer. Rates of solute transport through such barriers are typically many orders of magnitude slower than rates through the aquifer. Nevertheless, the success of remedial actions may be sensitive to these low rates of transport. Two numerical simulation methods for representing low-permeability barriers in a finite-difference groundwater-flow and transport model were tested. In the first method, the hydraulic properties of the barrier were represented directly on grid cells and in the second method, the intercell hydraulic-conductance values were adjusted to approximate the reduction in horizontal flow, allowing use of a coarser and computationally efficient grid. The alternative methods were tested and evaluated on the basis of hypothetical test problems and a field case involving tetrachloroethylene (PCE) contamination at a Superfund site in New Hampshire. For all cases, advective transport across the barrier was negligible, but preexisting numerical approaches to calculate dispersion yielded dispersive fluxes that were greater than expected. A transport model (MODFLOW-GWT) was modified to (1) allow different dispersive and diffusive properties to be assigned to the barrier than the adjacent aquifer and (2) more accurately calculate dispersion from concentration gradients and solute fluxes near barriers. The new approach yields reasonable and accurate concentrations for the test cases.     

Apportionment of ambient primary and secondary pollutants during a 2001 summer study in Pittsburgh using U.S. Environmental Protection Agency UNMIX

Apportionment of primary and secondary pollutants during the summer 2001 Pittsburgh Air Quality Study (PAQS) is reported. Several sites were included in PAQS, with the main site (the supersite) adjacent to the Carnegie Mellon University campus in Schenley Park. One of the additional sampling sites was located at the National Energy Technology Laboratory, located approximately 18 km southeast of downtown Pittsburgh. Fine particulate matter (PM2.5) mass, gas-phase volatile organic material (VOM), particulate semivolatile and nonvolatile organic material (NVOM), and ammonium sulfate were apportioned at the two sites into their primary and secondary contributions using the U.S. Environmental Protection Agency UNMIX 2.3 multivariate receptor modeling and analysis software. A portion of each of these species was identified as originating from gasoline and diesel primary mobile sources. Some of the organic material was formed from local secondary transformation processes, whereas the great majority of the secondary sulfate was associated with regional transformation contributions. The results indicated that the diurnal patterns of secondary gas-phase VOM and particulate semivolatile and NVOM were not correlated with secondary ammonium sulfate contributions but were associated with separate formation pathways. These findings are consistent with the bulk of the secondary ammonium sulfate in the Pittsburgh area being the result of contributions from distant transport and, thus, decoupled from local activity involving organic pollutants in the metropolitan area.     

Alterations in antioxidant defense system of workers chronically exposed to arsenic,cadmium and mercury from coal flying ash

Humans are exposed to different stress factors that are responsible for over-production of reactive oxygen species. Exposure to heavy metals is one of these factors. The aim of the study was to analyze the effect of chronic exposure to heavy metals through coal flying ash on the efficiency of antioxidative defensive mechanisms, represented by the activity of superoxide dismutase, glutathione peroxidase and ascorbic acid. Nonessential elements such as arsenic and mercury levels showed a significant increase (p > 0.001) in the power plant workers rather than in the control subjects. There were no significant differences of blood cadmium between power plant workers and control subjects. We found a significant positive correlation (p < 0.05) between BAs/SZn (r = 0.211), BAs/BSe (r = 0.287), BCd/SCu (r = 0.32) and BHg/BSe (r = 0.263) in the plant workers. Red blood cell antioxidant enzymes and plasma ascorbic acid were significantly lower in power plants workers than in the control group (p < 0.002). We can conclude that levels of mercury, arsenic and cadmium in blood, despite their concentration within the reference values, significantly affect plasma ascorbic acid concentration, superoxide dismutase and glutathione peroxidase activity, which are able to increase the risk of oxidative stress.

     

Phosphorus runoff losses from subsurface-applied poultry litter on coastal plain soils

The application of poultry litter to soils is a water quality concern on the Delmarva Peninsula, as runoff contributes P to the eutrophic Chesapeake Bay. This study compared a new subsurface applicator for poultry litter with conventional surface application and tillage incorporation of litter on a Coastal Plain soil under no-till management. Monolith lysimeters (61 cm by 61 cm by 61 cm) were collected immediately after litter application and subjected to rainfall simulation (61 mm h(-1) 1 h) 15 and 42 d later. In the first rainfall event, subsurface application of litter significantly lowered total P losses in runoff (1.90 kg ha(-1)) compared with surface application (4.78 kg ha(-1)). Losses of P with subsurface application were not significantly different from disked litter or an unamended control. By the second event, total P losses did not differ significantly between surface and subsurface litter treatments but were at least twofold greater than losses from the disked and control treatments. A rising water table in the second event likely mobilized dissolved forms of P in subsurface-applied litter to the soil surface, enriching runoff water with P. Across both events, subsurface application of litter did not significantly decrease cumulative losses of P relative to surface-applied litter, whereas disking the litter into the soil did. Results confirm the short-term reduction of runoff P losses with subsurface litter application observed elsewhere but highlight the modifying effect of soil hydrology on this technology's ability to minimize P loss in runoff.     

The development of a novel process planning algorithm for an unconstrained hybrid manufacturing process

The application of state of the art manufacturing processes has always been constrained by the capabilities either from technical limitations such as limited materials and complex part geometries or production costs. As a result, hybrid manufacturing processes – where varied manufacturing operations are carried out – are emerging as a potential evolution for current manufacturing technologies. However, process planning methods capable of effectively utilising manufacturing resources for hybrid processes are currently limited. In this paper, a hybrid process, entitled iAtractive, combining additive, subtractive and inspection processes, along with part specific process planning is proposed. The iAtractive process aims to accurately manufacture complex geometries without being constrained by the capability of individual additive and subtractive processes. This process planning algorithm enables a part to be manufactured taking into consideration, process capabilities, production time and material consumption. This approach is also adapted for the remanufacture of existing parts. Four test parts have been manufactured from zero and existing parts, demonstrating the efficacy of the proposed hybrid process and the process planning algorithm.