Variations in the emissions of volatile organic compounds from the toner for a specific photocopier

A laboratory thermal desorption apparatus was used to measure emissions from a number of nominally identical photocopier toners--manufactured to meet the specifications of one specific model copier--when these toners were heated to fuser temperature (180-200 degrees C). The objective was to assess how potential volatile organic compound (VOC) emissions from the toner for a given copier can vary, depending upon the production run and the supplier. Tests were performed on a series of toner (and associated raw polymer feedstock) samples obtained directly from a toner manufacturer, representing two production runs using a nonvented extrusion process, and on toner cartridges purchased from two local retailers, representing three different production lots (histories unknown). The results showed that the retailer toners consistently had up to 350% higher emissions of some major compounds (expressed as microgram of compound emitted/g of toner), and up to 100% lower emissions of others, relative to the manufacturer toners (p < or = 0.01). The manufacturer toners from one production run had emissions of certain compounds, and of total VOCs, that were modestly higher (13-18%) than those from the other run (p < or = 0.01). The emission differences between the retailer and manufacturer toners are probably due to differences in the manufacturing processes and/or feedstocks used to produce the toners from these different sources.     

Highly modular pattern in ant-plant interactions involving specialized and non-specialized myrmecophytes

Because Tachia guianensis (Gentianaceae) is a “non-specialized myrmecophyte” associated with 37 ant species, we aimed to determine if its presence alters the ant guild associated with sympatric “specialized myrmecophytes” (i.e., plants sheltering a few ant species in hollow structures). The study was conducted in a hilly zone of a neotropical rainforest where two specialized myrmecophytes grow at the bottom of the slopes, another at mid-slope, and a fourth on the hilltops. Tachia guianensis, which occurred everywhere, had its own guild of associated ant species. A network analysis showed that its connections with the four other myrmecophytes were rare and weak, the whole resulting in a highly modular pattern of interactions with one module (i.e., subnetwork) per myrmecophyte. Three ant species parasitized three out of the four specialized myrmecophytes (low nestedness noted), but were not or barely associated with T. guianensis that therefore did not influence the parasitism of specialized myrmecophytes.     

Mid–trimester hyperechogenic bowel in a fetus of Japanese origin carrying a new mutation of CFTR gene (L548Q)

We present a case of a fetus with hyperechogenic bowel, in which the L548Q mutation was detected in the mother of Japanese origin and the ΔF508 mutation in the father of Caucasian origin. The fetus proved to be compound heterozygous. Research into cystic fibrosis transmembrane conductance regulator (CFTR) mutations in this case was triggered by the fact that the fetus had a characteristic hyperechogenic bowel image with normal karyotype and no indications of intrauterine infections. Hyperechogenic bowel is highly indicative of a CFTR gene mutation. The incidence of cystic fibrosis (CF) in fetuses with mid-trimester hyperechogenic bowel is 5%, but once the most frequent mutations have been accounted for, rarer mutations must be investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

Characterization of Emissions of Volatile Organic Compounds from Interior Alkyd Paint

ABSTRACT

Alkyd paint continues to be used indoors for application to wood trim, cabinet surfaces, and some kitchen and bathroom walls. Alkyd paint may represent a significant source of volatile organic compounds (VOCs) indoors because of the frequency of use and amount of surface painted. The U.S. Environmental Protection Agency (EPA) is conducting research to characterize VOC emissions from paint and to develop source emission models that can be used for exposure assessment and risk management. The technical approach for this research involves both analysis of the liquid paint to identify and quantify the VOC contents and dynamic small chamber emissions tests to characterize the VOC emissions after application. The predominant constituents of the primer and two alkyd paints selected for testing were straight-chain alkanes (C9–C12); C8–C9 aromatics were minor constituents. Branched chain alkanes were the predominant VOCs in a third paint. A series of tests were performed to evaluate factors that may affect emissions following application of the coatings. The type of substrate (glass, wallboard, or pine board) did not have a substantial impact on the emissions with respect to peak concentrations, the emissions profile, or the amount of VOC mass emitted from the paint. Peak concentrations of total volatile organic compounds (TVOCs) as high as 10,000 mg/m³ were measured during small chamber emissions tests at 0.5 air exchanges per hour (ACH). Over 90% of the VOCs were emitted from the primer and paints during the first 10 hr following application. Emissions were similar from paint applied to bare pine board, a primed board, or a board previously painted with the same paint. The impact of other variables, including film thickness, air velocity at the surface, and air-exchange rate (AER) were consistent with theoretical predictions for gas-phase, mass transfer-controlled emissions. In addition to the alkanes and aromatics, aldehydes were detected in the emissions during paint drying. Hexanal, the predominant aldehyde in the emissions, was not detected in the liquid paint and was apparently an oxidation product formed during drying. This paper summarizes the results of the product analyses and a series of small chamber emissions tests. It also describes the use of a mass balance approach to evaluate the impact of test variables and to assess the quality of the emissions data.     

The undebated issue of justice: silent discourses in Dutch flood risk management

Regional Environmental Change - Flood risk of all types of flooding is projected to increase based on climate change projections and increases in damage potential. These challenges are likely to...     

Land cover change of watersheds in Southern Guam from 1973 to 2001

Land cover change can be caused by human-induced activities and natural forces. Land cover change in watershed level has been a main concern for a long time in the world since watersheds play an important role in our life and environment. This paper is focused on how to apply Landsat Multi-Spectral Scanner (MSS) satellite image of 1973 and Landsat Thematic Mapper (TM) satellite image of 2001 to determine the land cover changes of coastal watersheds from 1973 to 2001. GIS and remote sensing are integrated to derive land cover information from Landsat satellite images of 1973 and 2001. The land cover classification is based on supervised classification method in remote sensing software ERDAS IMAGINE. Historical GIS data is used to replace the areas covered by clouds or shadows in the image of 1973 to improve classification accuracy. Then, temporal land cover is utilized to determine land cover change of coastal watersheds in southern Guam. The overall classification accuracies for Landsat MSS image of 1973 and Landsat TM image of 2001 are 82.74% and 90.42%, respectively. The overall classification of Landsat MSS image is particularly satisfactory considering its coarse spatial resolution and relatively bad data quality because of lots of clouds and shadows in the image. Watershed land cover change in southern Guam is affected greatly by anthropogenic activities. However, natural forces also affect land cover in space and time. Land cover information and change in watersheds can be applied for watershed management and planning, and environmental modeling and assessment. Based on spatio-temporal land cover information, the interaction behavior between human and environment may be evaluated. The findings in this research will be useful to similar research in other tropical islands.     

Ionic liquids for the inhibition of gas hydrates. A review

The formation of gas hydrates is a major issue during the operation of oil and gas pipelines, because gas hydrates cause plugging, thereby disrupting the normal oil and gas flows. A solution is to inject gas hydrate inhibitors such as ionic liquids. Contrary to classical inhibitors, ionic liquids act both as thermodynamic inhibitors and hydrate inhibitors, and as anti-agglomerates. Imidazolium-based ionic liquids have been found efficient for the inhibition of CO₂ and CH₄ hydrates. For CO₂ gas hydrates, N-ethyl-N-methylmorpholinium bromide showed an average depression temperature of 1.72 K at 10 wt% concentration. The induction time of 1-ethyl-3-methyl imidazolium bromide is 36.3 h for CO₂ hydrates at 1 wt% concentration. For CH₄ hydrates, 1-ethyl-3-methyl-imidazolium chloride showed average depression temperature of 4.80 K at 40 wt%. For mixed gas hydrates of CO₂ and CH₄, only quaternary ammonium salts have been studied. Tetramethyl ammonium hydroxide shifted the hydrate liquid vapour equilibrium to 1.56 K at 10 wt%, while tetrabutylammonium hydroxide showed an induction time of 0.74 h at 1 wt% concentration.

     

Experimental investigation on the operating variables of a near-field electrospinning process via response surface methodology

The past decade has seen tremendous advances in producing nanofibers and nanowires from a variety of materials for applications in sensors, photovoltaic devices and regenerative medicine. Nano and sub-micron fibers produced from a conventional electrospinning process are relatively inexpensive to produce but result in entangled and randomly oriented fibers. In this research, we have utilized a modified form of the electrospinning process, wherein polymeric fibers of Poly-caprolactone (PCL) are deposited in controlled pattern orientations by the ‘near-field electrospinning’ process. The process variables are interdependent and greatly influence the final deposition and diameters of the fibers. Response Surface Methodology (RSM) was used to obtain a quantitative and systematic understanding of the near-field deposition process and its relationship with the process parameters. A response surface function was empirically determined with fiber diameter as the observed response and the deposition parameters as the variables. Fibers of diameter ranging for 500–1500 nm were produced with a reasonable R² value of 0.74, which indicates approximately seventy five percent of the variation in the response variable can be explained by the explanatory variables and the rest by the inherent process variability.