Assessing the potential of using phytoremediation for pyrene‐contaminated soils

Forage crop species representing two biologically distinct families (legumes and grasses) were evaluated on soil spiked with 100 mg/kg of pyrene to determine the potential effectiveness of the rhizospheres of these plants for phytoremediation. In this experiment, pyrene dissipation could not be attributed to the presence of plants. Pyrene dissipation was also not related to rhizosphere biological activity, such as microbial counts and enzyme activity. Planting with reed canarygrass and switchgrass significantly increased the microbial counts in soil; however, the differences in the microbial counts were not correlated to the levels of pyrene dissipation. Reed canarygrass rhizosphere had significantly higher dehydrogenase activity compared to the switchgrass rhizosphere, but this difference in soil dehydrogenase activity was not related to pyrene dissipation. In general, the use of plants was not effective in causing pyrene transformation; however, the presence of vegetation on polycyclic aromatic hydrocarbon–contaminated soils could play a significant role in limiting the spread of contaminants (erosion, leaching) and enhancing ecosystem restoration. © 2004 Wiley Periodicals, Inc.     

Evaluation of Olfactory Sensing in the Water Industry

On behalf of a consortium of water companies and manufacturers, an electronic olfactory sensor was evaluated for its potential application to on-line analysis within the water industry. Early results are encouraging. The sensor has the ability to detect contaminants in raw water which cause taste and odour problems, such as 2,4,6-trichloroanisole and some hydrocarbons. It can also discriminate between three different raw water sources.     

Modelling contra-flow in crowd dynamics DEM simulation

This paper highlights the growing need for a realistic crowd simulation in the design of large venues such as concert halls and stadia. A discrete element method (DEM) technique for modelling crowd dynamics has been developed that represents each person within the model as 3 overlapping circles, a position, orientation and velocity in 2D. Contact forces between elements are included in the model as well as psychological forces, motive forces and moments. The motion of each person is then modelled in a Newtonian manner with a numerical integration time-stepping scheme. The model has been shown previously to work well in predicting egress. In this paper the predicted model behaviour is compared to actual video footage shot at various locations around University Park Campus, Nottingham. It did not match well to the video footage when people are moving towards each other, as in cases of contra-flow on a walkway. In order to improve the model, a general algorithm for ‘avoidance’ was included which appeared to make the model significantly more realistic in these cases. The paper also shows areas for further potential development, such as incorporating people into associative groups such as family or friends.     

Rehabilitating Agricultural Streams in Australia with Wood: A Review

Worldwide, the ecological condition of streams and rivers has been impaired by agricultural practices such as broadscale modification of catchments, high nutrient and sediment inputs, loss of riparian vegetation, and altered hydrology. Typical responses include channel incision, excessive sedimentation, declining water quality, and loss of in-stream habitat complexity and biodiversity. We review these impacts, focusing on the potential benefits and limitations of wood reintroduction as a transitional rehabilitation technique in these agricultural landscapes using Australian examples. In streams, wood plays key roles in shaping velocity and sedimentation profiles, forming pools, and strengthening banks. In the simplified channels typical of many agricultural streams, wood provides habitat for fauna, substrate for biofilms, and refuge from predators and flow extremes, and enhances in-stream diversity of fish and macroinvertebrates.Most previous restoration studies involving wood reintroduction have been in forested landscapes, but some results might be extrapolated to agricultural streams. In these studies, wood enhanced diversity of fish and macroinvertebrates, increased storage of organic material and sediment, and improved bed and bank stability. Failure to meet restoration objectives appeared most likely where channel incision was severe and in highly degraded environments. Methods for wood reintroduction have logistical advantages over many other restoration techniques, being relatively low cost and low maintenance. Wood reintroduction is a viable transitional restoration technique for agricultural landscapes likely to rapidly improve stream condition if sources of colonists are viable and water quality is suitable.     

A sensitive and robust method for the determination of alkylphenol polyethoxylates and their carboxylic acids and their transformation in a trickling filter wastewater treatment plant

This paper presents a method for the determination of alkylphenols, alkylphenol polyethoxylates (APEO) and alkylphenol ethoxycarboxylates (APEC) in the aqueous and particulate phase of wastewater samples. Quantification was achieved by liquid chromatography-tandem mass spectrometry. The sensitivity of the method is demonstrated by low detection limits, in the dissolved phase 1.2-9.6ngl(-1) for alkylphenol, AP(1-3)EO and APEC and 0.1-4.1ngl(-1) for longer chain alkylphenol polyethoxylates. The method detection limit for particulate phase samples ranged from 6 to 60ngg(-1) for AP, AP(1-3)EO and APEC; with the longer chain APEO being from 0.5 to 20ngg(-1). Matrix effects were noted in complex matrix rich samples. There was a distinct change in the distribution of alkylphenol ethoxylates during biological treatment of the wastewater, with the major biotransformation products observed being carboxylated derivatives at concentrations of up to 1768ngl(-1). Shorter chain APEO were present in higher proportions in the suspended solids, due to their higher affinity to particulate matter compared to the long-chain oligomers.     

Estimation of septic tank setback distances based on transport of E. coli and F-RNA phages

Setback distances between septic tank systems and the shorelines of Lake Okareka, New Zealand were determined from model simulations for a worst-case scenario, using the highest hydraulic conductivity and gradient measured in the field, removal rates of the microbial indicators (Escherichia coli and F-RNA phages) determined from a column experiment, and maximum values of the design criteria for the disposal system, and assuming an absence of an unsaturated zone, a continuous discharge of the raw effluent from a failed or non-complying treatment system (both indicators at concentrations of 1x10(7) counts/100 ml) into the groundwater and no sorption of pathogens in the aquifer. Modelling results suggest that the minimal setback distances were 16 m to satisfy the New Zealand Recreational Water Quality Guidelines for E. coli <126 per 100 ml (Ministry for the Environment, 1999) and 48 m to meet the Drinking-Water Standards for New Zealand 2000 for enteric virus <1 per 100 l (Ministry of Health, 2000). These distances may be applicable for other lakeshores in pumice sand aquifers with groundwater velocities <7 m/day. Findings of laboratory column and batch experiments provided an insight into the microbial attenuation and transport processes in pumice sand aquifers. Bacterial removal was predominately through filtration (87-88%) and partially by die-off (12-13%), while viral removal was by both die-off (45%) and filtration (55%). In addition, microbial die-off in groundwater without aquifer material (i.e., free microbes) was much lower than die-off in groundwater with aquifer material (i.e., sorbed microbes) and contributed only 2-6% to the total removal. This implies that the setback distances estimated from die-off rates for the free microbes, determined in the laboratory without considering aquifer media and other removal processes, which are often reported in the literature, could be larger than necessary.     

Developing a sustainable energy strategy for a water utility. Part II: A review of potential technologies and approaches

Environmental legislation is increasing the amounts of bought-in electricity required for sewage treatment, and generating larger volumes of sewage sludge to be treated and disposed of. Concurrently, concerns over global warming and food safety from sewage sludge recycling on agricultural land is augmenting the costs of conventional sewage and sludge treatment technologies and practices. This paper reviews some emerging technologies and practices that may assist in mitigating these problems in the future. In addition, a number of potential renewable energy technologies available to water companies are reviewed. Results suggest that through the take-up of new technologies, current and future water quality standards could be delivered in a more sustainable way. However, this series of papers also highlights that institutional and political conflicts may have inadvertently failed to recognise the wider effects of improving water quality and lessened the financial support necessary for their widespread take-up. It is also suggested that through the use of a Strategic Environmental Assessment (SEA) approach, stakeholders could gain a better understanding of the broader environmental effects of achieving certain water quality standards and develop policy and long-term investment strategies accordingly. However, to fulfill the information requirements of an SEA, an appropriate appraisal tool that considers many of these factors in unison is required, and a possible technique is suggested.     

Reproduction on the edge: large-scale patterns of individual performance in a marine invertebrate

Reproductive output is a central attribute of life history, providing a measure of individual and population performance. The fields of ecology, biogeography, and evolutionary biology take disparate approaches in addressing spatial variation in reproduction, and thus we lack clear predictions for how reproductive output should vary geographically. We empirically investigate these contrasting theoretical approaches by determining geographic patterns in reproductive output for intertidal populations of the purple sea urchin, Strongylocentrotus purpuratus, at 15 sites spanning a large geographic distance (9 degrees span of latitude) from central California, USA, to Baja California, Mexico. Contrary to predictions from biogeography, some of the highest values of reproductive output are at sites near the species' southern range boundary. Additionally, sea urchins do not exhibit a latitudinal gradient in reproduction, but rather show considerable mesoscale variation in reproductive output. Spatial analyses reveal that this variation is correlated with coastal topographic features that are known to influence the pattern of nearshore nutrient flux and circulation. We hypothesize that urchins' reproductive output may be driven by the spatial distribution of their food supply, drift macroalgae, the abundance of which is influenced by both nutrient supply and alongshore transport processes that are coupled to topographic features. Large-scale studies such as this provide valuable insight into the causes of species' range limits, population connectivity, habitat reserve design, and forecasting the effects of climate change on species' distributions.     

Estimating different order polynomial logarithmic environmental Kuznets curves

Environmental Science and Pollution Research - This paper contributes to the environmental literature by (i) demonstrating that the estimated coefficients and the statistical significance of the...