Effect of the Fine Fraction of Particulate Matter versus the Coarse Mass and Other Pollutants on Daily Mortality in Santiago,Chile

ABSTRACT

Daily counts of non-accidental deaths in Santiago, Chile, from 1988 to 1996 were regressed on six air pollutants— fine particles (PM_2.5), coarse particles (PM_10–2.5), CO, SO₂, NO₂, and O₃. Controlling for seasonal and meteorological conditions was done using three different models— a generalized linear model, a generalized additive model, and a generalized additive model on previously filtered data. Single- and two-pollutant models were tested for lags of 1-5 days and the average of the previous 2-5 days.

The increase in mortality associated with the mean levels of air pollution varied from 4 to 11%, depending on the pollutants and the way season of the year was considered. The results were not sensitive to the modeling approaches, but different effects for warmer and colder months were found. Fine particles were more important than coarse particles in the whole year and in winter, but not in summer. NO₂ and CO were also significantly associated with daily mortality, as was O₃ in the warmer months. No consistent effect was observed for SO₂. Given particle composition in Santiago, these results suggest that combustion-generated pollutants, especially from motor vehicles, may be associated with increased mortality. Temperature was closely associated with mortality. High temperatures led to deaths on the same day, while low temperatures lead to deaths from 1 to 4 days later.     

Toward enhanced subsurface intervention methods using chaotic advection

Many intervention activities in the terrestrial subsurface involve the need to recover/emplace distributions of scalar quantities (e.g. dissolved phase concentrations or heat) from/in volumes of saturated porous media. These scalars can be targeted by pump-and-treat methods or by amendment technologies. Application examples include in-situ leaching for metals, recovery of dissolved contaminant plumes, or utilizing heat energy in geothermal reservoirs. While conventional pumping methods work reasonably well, costs associated with maintaining pumping schedules are high and improvements in efficiency would be welcome. In this paper we discuss how transient switching of the pressure at different wells can intimately control subsurface flow, generating a range of "programmed" flows with various beneficial characteristics. Some programs produce chaotic flows which accelerate mixing, while others create encapsulating flows which can isolate fluid zones for lengthy periods. In a simplified model of an aquifer subject to balanced pumping, chaotic flow topologies have been predicted theoretically and verified experimentally using Hele-Shaw cells. Here, a survey of the key characteristics of chaotic advection is presented. Mathematical methods are used to show how these characteristics may translate into practical situations involving regional flows and heterogeneity. The results are robust to perturbations, and withstand significant aquifer heterogeneity. It is proposed that chaotic advection may form the basis of new efficient technologies for groundwater interventions.     

The Controversy Over Natural Channel Design: Substantive Explanations and Potential Avenues for Resolution1

Lave, Rebecca, 2009. The Controversy Over Natural Channel Design: Substantive Explanations and Potential Avenues for Resolution. Journal of the American Water Resources Association (JAWRA) 45(6):1519‐1532. Abstract: The controversy over Natural Channel Design (NCD) has perplexed, and sometimes paralyzed, the stream restoration community in the United States for more than a decade. Despite the high level of energy expended by participants on both sides, the content of the discussion has not advanced significantly. The two sides seem to be talking past each other, rather than engaging in constructive conversation. This paper attempts to start that conversation. Based on five years of primarily social science research, this paper explains the key components of the NCD approach, evaluates a number of the most common objections raised by its critics, offers a brief explanation for the widespread use of NCD, and concludes with suggestions about how to bring the controversy to a close.     

Fisheries regulatory regimes and resilience to climate change

Climate change is already producing ecological, social, and economic impacts on fisheries, and these effects are expected to increase in frequency and magnitude in the future. Fisheries governance and regulations can alter socio-ecological resilience to climate change impacts via harvest control rules and incentives driving fisher behavior, yet there are no syntheses or conceptual frameworks for examining how institutions and their regulatory approaches can alter fisheries resilience to climate change. We identify nine key climate resilience criteria for fisheries socio-ecological systems (SES), defining resilience as the ability of the coupled system of interacting social and ecological components (i.e., the SES) to absorb change while avoiding transformation into a different undesirable state. We then evaluate the capacity of four fisheries regulatory systems that vary in their degree of property rights, including open access, limited entry, and two types of rights-based management, to increase or inhibit resilience. Our exploratory assessment of evidence in the literature suggests that these regulatory regimes vary widely in their ability to promote resilient fisheries, with rights-based approaches appearing to offer more resilience benefits in many cases, but detailed characteristics of the regulatory instruments are fundamental.     

Monitoring losses of copper based wood preservatives in the Thames estuary

Field trials were conducted at two sites in the Thames estuary to monitor losses of copper, chromium and arsenic from wood preservative treated timbers of varying sizes and treatment regimes. Results indicated that leaching tests conducted under standard laboratory conditions might overestimate losses compared to losses resulting from real environmental exposures. Amine copper treated wood was noted to leach higher levels of copper compared to chromated copper arsenate treated wood, and was therefore considered an inappropriate replacement biocide for fresh and marine construction purposes on this basis. Increases in copper concentrations in the outer sections of amine copper treated posts may have represented re-distribution of this component in this timber. No accumulation of metals was found in sediments surrounding field trial posts.     

The success of elutriate tests in extended prediction of water quality after a dredging operation under freshwater and saline conditions

Dredging simulation by elutriate tests accurately predicted concentrations of Hg, Cu, Mn and Fe released to the water column from contaminated sediment to within 1 order of magnitude. Hg and Cu concentrations increased by up to 7-fold after dredging, but declined to background concentrations within 48 h. Maximum loadings of Hg and Cu coincided with Fe and total organic carbon (TOC) water column concentrations, suggesting Hg and Cu are adsorbed onto particulates of Fe oxides and organic material. Seasonal changes in redox potential and temperature did not significantly affect metal release from sediments. Saline water did not cause significant increases in contaminant release from sediments to the water column over that observed for freshwater. Water quality standards of 1 µg l^–1 Hg and 28 µg l^–1 Cu as annual averages were not breached by dredging operations. Long-term effects of dredging on Hg and Cu availability, due to deposition of contaminated material as surficial sediments, is, however, of concern.     

Heavy metal binding by the polymeric organic fractions of sewage sludges

Organic complexes in sewage sludge play an important role in the speciation and transformation of metals into potentially more toxic and bioavailable forms. Two organic fractions, bacterial extracellular polymer and fulvic acid, were extracted from mixed liquor and digested sewage sludge by methods established as the most appropriate. The homogeneity of the extracts was verified using gel permeation chromatography. Conditional stability constants and complexation capacities of the organic fractions from the sludges with copper, cadmium, nickel and zinc have been determined using equilibrium dialysis titration. Organic fractions extracted from digested sludge demonstrated a greater capacity to complex metals over mixed liquor extracts. Copper formed stronger complexes than nickel with the mixed liquor biomass and cadmium exhibited the greatest affinity for digested sludge organic matter.     

Analysis of volatile organic compounds in water,waste water and an industrial effluent

Three analytical methods have been evaluated for the determination of volatile organic compounds in water. These techniques have been subsequently applied to the study of a trade effluent discharge problem.     

Spatial distribution of mercury in the sediments and riparian environment of the River Yare, Norfolk, UK

Concentrations of total mercury (T-Hg) were determined in sediments and riparian (bankside) soils from the River Yare, Norfolk, UK to assess the current extent of contamination arising from a historical point source discharge. The results demonstrate that the spatial distribution pattern in surficial sediments and soils follows that of a distinct pollution plume with an initial increase 2-3 km downstream from the point source discharge at Whitlingham Sewage Treatment Works (STW) outfall. Average T-Hg concentrations in the surficial sediments ranged from 0.1 to 8.13 mg kg(-1); bankside soil concentrations ranged from 0.1 to 2.63 mg kg(-1). There has been a decline in downstream background sediment concentrations of Hg over time. This is likely to be the result of burial by fresh relatively uncontaminated sediments and possibly in the lower reach as a consequence of the influence of the freshwater-saline interface occurring near Cantley. Channel morphology was also shown to be an important factor in determining the large variations of Hg concentrations between sample points within transects. The predominant source of Hg to the soils appears to be due to dredging and the deposition of sediments during flooding.     

Factors controlling the accumulation of metals within fluvial systems

The magnitude and distribution of European Community (EC) regulated List I and List II metals and metalloids have been investigated in two lowland river systems in East Anglia, U.K. A combination of sediment and water quality data identified municipal sewage treatment work discharges as the main metal input sources to the river systems and identified two main areas of metal contamination: the Pix Brook, downstream of Letchworth STW on the River Ivel, and a 14 km enrichment zone adjacent to Whitlingham STW on the River Yare. The basement geology, flow dynamics, distance from point sources and sediment type were identified as important controls upon the magnitude and spatial distribution of metal contaminants.