Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

库仑滴定法测定一氧化碳

本文就一氧化碳的测定条件和CO氧化过程中氧化剂的选择进行了研究。试验表明:ReAO_4-Ⅱ为氧化CO的活性催化剂,转化率可达100％(在300℃以上),本法简便,可用于空气中一氧化碳的测定和催化剂对CO活性测试。     

Estimating means and variances: The comparative efficiency of composite and grab samples

This paper compares the efficiencies of two sampling techniques for estimating a population mean and variance. One procedure, called grab sampling, consists of collecting and analyzing one sample per period. The second procedure, called composite sampling, collectsn samples per period which are then pooled and analyzed as a single sample. We review the well known fact that composite sampling provides a superior estimate of the mean. However, it is somewhat surprising that composite sampling does not always generate a more efficient estimate of the variance. For populations with platykurtic distributions, grab sampling gives a more efficient estimate of the variance, whereas composite sampling is better for leptokurtic distributions. These conditions on kurtosis can be related to peakedness and skewness. For example, a necessary condition for composite sampling to provide a more efficient estimate of the variance is that the population density function evaluated at the mean (i.e.f()) be greater than . If , then a grab sample is more efficient. In spite of this result, however, composite sampling does provide a smaller estimate of standard error than does grab sampling in the context of estimating population means.     

液相化学发光分析在环境监测中的应用

介绍液相化学发光分析法的原理和特点以及十年来在我国环境监测中的应用。收录1983年～1991年国内的应用论文50余篇,作了较为系统全面的评述。     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Comparison of allozyme and mitochondrial DNA spatial differentiation in the limpet Patella vulgata

Allozyme and restriction enzyme analysis of mtDNA was used to study variation in samples from British populations of the marine limpet Patella vulgata in two regions. South Wales and Northeast England. Allozyme analysis revealed significant differences in allele frequencies among samples. However F _ST (population differentiation) values were no higher between than within regions, indicating that genetic heterogeneity was localised and not related to geographic separation. For mtDNA, samples from South Wales exhibited higher haplotype diversity values than samples from Northeast England. In addition there were substantial differences in the haplotype distribution between regions. The value of , the haploid analogoue of F _ST , was low within regions (=0.09) but high between regions (=0.44). The estimated difference in migration rate for allozymes and mtDNA exceed the neutral expectation, unless it is assumed that there are influential differences in the magnitude of female and male gametic dispersal.     

Biodegradation of undecylbenzenesulphonate by mixed methane-oxidizing culture

Biodegradation of undecylbenzenesulphonate (C(11)LAS) was performed in shake flasks at 21 degrees C by using a mixed methanotrophic-heterotrophic culture containing type II methanotrophs. Concentrations of C(11)LAS and aromatic intermediates were determined by reversed-phase high-performance liquid chromatography (RP-HPLC). Methane and carbon dioxide concentrations were measured in headspace samples by using gas chromatography. RP-HPLC analyses of aqueous samples show that the culture MM1 expresses the capability of C(11)LAS transformation in the presence or absence of methane. Simultaneous methane oxidation and C(11)LAS degradation, and the inhibition of both transformation processes by acetylene were observed. This suggests the possibility that C(11)LAS transformation is catalyzed by methane monooxygenase (MMO). Comparable affinity of culture MM1 for both methane and C(11)LAS ( [Formula: see text], respectively), and more than four times higher maximum transformation rate for methane than for C(11)LAS ( [Formula: see text] (dry weight) cells day(-1), respectively), were determined. This further supports the involvement of MMO enzyme system in transformation and suggests a pronounced competitive inhibition of C(11)LAS degradation by methane.     

多介质环境目标值的应用

本文概述了多介质目标德的SAM/Ⅰ的方法。多介质目标值包括环境目标值和排放目标值。点源分析包括SAM/ⅠA,SAM/ⅠB,SAM/Ⅰ,SAM/Ⅱ。在缺少环境质量标准的情况下,使用多介质环境目标值有较强的适用性,且具有省时、省力、经济等特点。本文将多介质目标值的SAM/ⅠA点源分析方法引入聚氯乙烯生产废水的环境评价中,取得较为满意的结果。     

地震安全性评价工作在城市建设中的重要作用

地震安全性评价工作在城市建设中起着非常重要的作用,为工程抗震提供精确的设计依据,提供科学合理的地震动参数,提出科学合理的设防要求,能够在一定程度上避免破坏性地震造成的损失,从而达到有效减灾的目的。