不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds（Stoke＇s Diameter）表示法，利用巴柯离心机对样品进行处理，得到各类排放源所排放的不同粒径的颗粒物重量百分比，为环境管理提供科学依据。     

氢化物发生一原子荧光光谱法测定气田废水中的痕量砷

采用氢化物发生－原子荧光光谱法测气田废水中的痕量砷。方法有取样量少，操作简单、灵敏度高、准确度高、重现性好等优点。砷的测定线性范围为1～200ng/mL，方法的检出限为0．0453ng/mL，相对标准偏差小于等于1．6％，加标回收率在96．0％～97．7％范围内。测定密码标样与气田废水中的痕量砷，获得了满意的结果。     

生物酶技术在农药残留快速检测中的应用进展

综述了生物酶法快速检测有机磷和氨基甲酸酯类农药残留的某些理论与技术问题。该技术是现代生物学技术同农业环境监测技术相结合的产物。并介绍了国内外关于农药残留快速测定的方法和研究状况，在快速和现场测定等方面有着巨大的潜力，是一种极具前景的快速检测技术。     

Application of the analytic hierarchy process to select characterization and risk-based decision-making and management methods for hazardous waste sites

Environmental managers at U.S. Department of Defense (DoD) installations overseas are faced with the challenge of managing contaminated sites at these installations with little information on the extent of contamination or the risk posed by the site. In this regard, DoD managers overseas encounter a situation quite similar to the situation faced by decision makers in the U.S. who are managing brownfields. Innovative site characterization and risk-based decision-making methods, which are currently being developed for expeditious application at brownfield sites in the U.S., may also be appropriate for application at overseas DoD sites. In this paper, the analytic hierarchy process (AHP) is used by DoD decision makers to evaluate and rank innovative site characterization technologies and risk-based decision-making and management methods, for use at installations in Korea. Results indicate that for sites with high potential risk the decision makers preferred site characterization technologies that produce data of high quality and a method that can be used to establish credible risk-based remediation goals. This study provides a framework for applying characterization technologies and risk management to poorly characterized contaminated sites in developing countries, where resources for remedial actions may be limited.     

佛山五峰垃圾填埋场封场后CH4等浓度变化特征

通过对垃圾填埋场设置监测井监测，讨论了垃丧填埋场封场后在内部温度，渗滤液的ＰＨ值及Ｏ２，ＣＨ４、ＣＯ２等气体浓度在时间上与空间上的变化，认为在不同到３ａ的时间五峰垃圾填埋场内部垃圾分解的程度就已达到整个分解过程听中后期，提出在高温高湿地区要充分利用ＣＨ４资源，必须尽快直埋尽快封场或边填埋边使用。     

Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

Road transport produces significant amounts of emissions by using crude oil as the primary energy source. A reduction of emissions can be achieved by implementing alternative fuel chains. The objective of this study is to carry out an economic, environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China. A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE, in which natural gas produces compressed natural gas (CNG), methanol, dimethylether (DME) and Fischer Tropsch diesel (FTD). The study included fuel production, vehicle production, vehicle operation, infrastructure and vehicle end of life as a system for each fuel/vehicle system. A generic gasoline fueled car is used as a baseline. Data have been reviewed and modified based on the best knowledge available to Chongqing local sources. Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale, direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly. The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles, and what issues need to be resolved in Chongqing. The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.     

粉煤灰在城市固体废物好氧填埋中应用的研究

从理论和实验两方面系统地阐述了粉煤灰在城市固体废物 (MSW)好氧填埋中的应用。粉煤灰具有良好的吸附性能及pH值调节能力 ,与MSW按适当比例混合后进行好氧填埋 ,能够弥补城市固体废物好氧填埋的不足 ,更能有效地降解垃圾 ,尤其是对垃圾渗滤液具有更好的降解效果     

喷射成形制造工艺

喷射成形是一种先进的材料制备技术,该技术具有近终形制造的特点,近年来已广泛应用于研究和开发多种高性能快速凝固材料.文中介绍了喷射成形工艺过程、特点,并回顾了喷射成形工艺的发展历程及现在所达到的技术水平.     

二氧化钛涂覆材料对甲苯的光催化降解作用

在自制的模拟小室中对二氧化钛涂覆材料的光催化性能进行了初步研究，在玻璃、瓷砖和日光灯这3种常见材料表面涂覆了二氧化钛，并以甲苯为模型化合物，测试了3种材料的净化性能。结果表明，3者对甲苯均有一定的降解效果，是有实用前景的光催化净化材料。