氢化物发生一原子荧光光谱法测定气田废水中的痕量砷

采用氢化物发生－原子荧光光谱法测气田废水中的痕量砷。方法有取样量少，操作简单、灵敏度高、准确度高、重现性好等优点。砷的测定线性范围为1～200ng/mL，方法的检出限为0．0453ng/mL，相对标准偏差小于等于1．6％，加标回收率在96．0％～97．7％范围内。测定密码标样与气田废水中的痕量砷，获得了满意的结果。     

生物酶技术在农药残留快速检测中的应用进展

综述了生物酶法快速检测有机磷和氨基甲酸酯类农药残留的某些理论与技术问题。该技术是现代生物学技术同农业环境监测技术相结合的产物。并介绍了国内外关于农药残留快速测定的方法和研究状况，在快速和现场测定等方面有着巨大的潜力，是一种极具前景的快速检测技术。     

佛山五峰垃圾填埋场封场后CH4等浓度变化特征

通过对垃圾填埋场设置监测井监测，讨论了垃丧填埋场封场后在内部温度，渗滤液的ＰＨ值及Ｏ２，ＣＨ４、ＣＯ２等气体浓度在时间上与空间上的变化，认为在不同到３ａ的时间五峰垃圾填埋场内部垃圾分解的程度就已达到整个分解过程听中后期，提出在高温高湿地区要充分利用ＣＨ４资源，必须尽快直埋尽快封场或边填埋边使用。     

Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

Road transport produces significant amounts of emissions by using crude oil as the primary energy source. A reduction of emissions can be achieved by implementing alternative fuel chains. The objective of this study is to carry out an economic, environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China. A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE, in which natural gas produces compressed natural gas (CNG), methanol, dimethylether (DME) and Fischer Tropsch diesel (FTD). The study included fuel production, vehicle production, vehicle operation, infrastructure and vehicle end of life as a system for each fuel/vehicle system. A generic gasoline fueled car is used as a baseline. Data have been reviewed and modified based on the best knowledge available to Chongqing local sources. Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale, direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly. The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles, and what issues need to be resolved in Chongqing. The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.     

粉煤灰在城市固体废物好氧填埋中应用的研究

从理论和实验两方面系统地阐述了粉煤灰在城市固体废物 (MSW)好氧填埋中的应用。粉煤灰具有良好的吸附性能及pH值调节能力 ,与MSW按适当比例混合后进行好氧填埋 ,能够弥补城市固体废物好氧填埋的不足 ,更能有效地降解垃圾 ,尤其是对垃圾渗滤液具有更好的降解效果     

喷射成形制造工艺

喷射成形是一种先进的材料制备技术,该技术具有近终形制造的特点,近年来已广泛应用于研究和开发多种高性能快速凝固材料.文中介绍了喷射成形工艺过程、特点,并回顾了喷射成形工艺的发展历程及现在所达到的技术水平.     

二氧化钛涂覆材料对甲苯的光催化降解作用

在自制的模拟小室中对二氧化钛涂覆材料的光催化性能进行了初步研究，在玻璃、瓷砖和日光灯这3种常见材料表面涂覆了二氧化钛，并以甲苯为模型化合物，测试了3种材料的净化性能。结果表明，3者对甲苯均有一定的降解效果，是有实用前景的光催化净化材料。     

厌氧水解改善富马酸废水的可生化性研究

炼油厂产生的难于生物降解的富马酸废水 ,其BOD5/CODcr均值 (比值平均值 )仅为 0 .2 83。采用厌氧水解对其进行处理 ,实验研究表明 :通过厌氧水解 ,其BOD5/CODcr可提高至 0 .433 ,废水的可生化性显著提高 ,为后续好氧处理创造了有利条件。     

水面溢油集油剂研究--天然混合羧酸系列集油剂

利用天然混合羧酸与聚氧丙烯醚以适当比例混合，以乙醇为溶剂制得新型集油剂，燃点８８．７℃，对于柴油、原油膜有优良的集油性能。ＱＳ＝１集油剂在５５ｃｍ长的水槽中，使水面柴油膜收缩距离达４４．０～５０．８ｃｍ，维持时间大于６ｈ；ＱＳ－２集油剂使原油膜面积收缩率７４．３％～７６．５％，维持时间大于１６ｈ。该集油剂在０～４０００ｍｇ／ｄｍ＾３浓度下，不影响小球藻和小新月菱形藻生长。该集油剂在４级海况条件下仍