A/O-MBR中硝化活性污泥的富集及其对氧氟沙星的降解作用

采用A/O-MBR系统,逐步提高进水氨氮浓度富集了硝化活性污泥(NAS),在此基础上,考察了COD、烯丙基硫脲(ATU)、氨氮初始浓度及氨氧化速率对NAS降解氧氟沙星(OFL)的影响。结果表明:富集的NAS的氨氧化速率达到了20 mg/(g SS·h)以上,对OFL具有明显降解作用;ATU存在条件下,COD对OFL的去除作用没有影响;提高初始氨氮浓度和NAS氨氧化速率均可以提高OFL降解量;初始氨氮浓度由50 mg/提升至150 mg/L时,OFL降解量由67.26 μg/g提高到82.11 μg/g;氨氧化速率由小于2.5 mg/(g SS·h)提升至大于20 mg/(g SS·h)时,OFL降解量由30.71 μg/g提高到75.16 μg/g。     

Fe3O4-TiO2Al吸附剂去除水中氟离子

以实验室制备的Fe3O4-TiO2·nH2O·Al吸附剂处理模拟和实际含氟废水,探讨了吸附剂用量、体系pH、吸附温度和吸附时间等因素对F-吸附效果的影响。结果表明:在初始F-浓度16.1 mg/L,起始pH 8.0,吸附剂投加量5 g/L,室温(约25 ℃)下吸附15 min时,模拟和实际废水的出水F-均可达到3O4-TiO2·nH2O·Al具有一定的实际应用价值。含氟水溶液初始pH对Fe3O4-TiO2·nH2O·Al吸附F-性能影响较大。在pH 介于3.0~5.0 时,吸附容量较大,过高或过低都会导致吸附容量降低。Fe3O4-TiO2·nH2O·Al吸附F-的过程为放热反应,升温不利于F-的吸附。该吸附剂吸附F- 的过程为化学吸附,符合准二级动力学模型,等温线拟合接近Freundlich吸附等温线。     

Short-duration hydrothermal fermentation of food waste: preparation of soil conditioner for amending organic-matter-impoverished arable soils

Environmental Science and Pollution Research - Soil conditioners can be used to compensate for the insufficient soil nutrition and organic matter (OM) of arable soils. However, the traditional...     

带长链烷基季铵盐杀菌活性官能团树脂的合成

以强酸型阳离子交换树脂作载体 ,合成磺酰氯树脂后固载乙二胺并胺基叔胺化 ,最后加卤代烷合成带长链烷基季铵盐杀菌活性官能团树脂 ,确定了合成路线中的各步反应条件。对异养菌的杀菌性能测定结果表明 ,合成的杀菌树脂的杀菌率在测定条件下都达到了 90 %以上 ,有望用于工业和民用水的杀菌消毒     

铝离子与聚硅酸的相互作用

本文应用核磁共振技术及化学分析方法研究了铝离子与聚硅酸之间的相互作用情况;借助于微电泳技术测定了含铝离子的聚硅酸絮凝剂在不同pH值条件下水解沉淀物的表面ζ电位变化情况;借助于透射电镜手段及静置观察方法考察了铝离子含量对聚硅酸胶凝作用的影响。实验结果表明,聚硅酸对铝离子具有一定的螯合(络合)和吸附作用,但二者之间不存在定量的作用关系,而是聚硅酸对铝离子的作用量随着铝离子含量的增加而增加。铝离子影响聚硅酸的胶凝时间,适量的铝离子的存在可延长聚硅酸的胶凝时间。聚硅酸的存在影响铝离子在不同pH值下的水解沉淀物的ζ电位值,使得达到零电位状态时的pH值向低pH值方向移动。     

济南市土壤中酞酸酯的分析与分布

本文对济南市土壤中酞酸酯污染的重点地区进行了比较详细的研究，初步掌握了酞酸酯在土壤中分布状况及分布规律。     

二氧化氯的发生技术

本文对国内外ＣｌＯ２的发生技术进行了综合评述，详尽地介绍了作者自行研制的ＣｌＯ２发生技术和装置，认为我国推广应用ＣｌＯ２消毒处理饮用水的时机已经成熟。     

纳米级铁粉脱氯降解四氯化碳

四氯化碳的生产和使用，给人类带来了较大危害。为此，采用纳米铁粉这一新方法对其进行脱氯处理。试验以纳米级铁粉对四氯化碳的脱氯率为考察指标，选用L25（5^6）正交试验方案，考察了降解介质的初始pH值、纳米铁粉的质量、降解温度、摇床转速和脱氯时间5个影响因素。结果表明，pH值这一因素有极显著影响；在得出的纳米铁粉对四氯化碳脱氯的最佳工艺条件下，获得了99．5％的脱氯率，为有机氯化物脱氯开辟了一条新途径。     

Uncovering the evolution of tin use in the United States and its implications

• US tin use decreases as the GDP value added by manufacturing sector increases. • Global and China’s tin use increases as the GDP added by manufacturing increases. • A sigmoid curve can fit the US tin use data well. • US tin use patterns is not due to the finite tin reserves or resources. • Policies, substitutions, etc. play key roles in the changing tin use patterns. Tin is of key importance to daily life and national security; it is considered an essential industrial metal. The United States (US) is the world’s largest economy and consumer of natural resources. Therefore, the analysis of historical tin use in the US is helpful for understanding future tin use trends in the world as a whole and in developing countries. Time series analysis, regression analysis with GDP or GDP/capita, and historical data fitted with logistic and Gompertz models are employed in this study. Historical tin use in the US shows three stages—increase-constant-decrease, as GDP per capita has increased. Tin use in the US is negatively correlated with the GDP value added by the manufacturing sector, while the use of tin worldwide and in China continues to increase along with the GDP value added by the manufacturing sector. Although a sigmoid curve can fit the US tin use data well, that use is not directly related to the limited tin reserves or resources. Rather, policies, economic restructuring, substitutions, new end-use markets, etc. have played key roles in the changing tin use patterns. This work contributes to understanding future tin use at both the global and national levels: tin use will continue to increase with GDP at the global level, but use patterns of tin at the national level can be changed through human intervention.     

Redox-active ligands in artificial photosynthesis: a review

Environmental Chemistry Letters - Given the rising socioeconomic issues of fossil fuels, efficient artificial photosynthesis would be an important milestone toward a sustainable world. A key step...