Anaerobic degradation of diethyl phthalate, di-n-butyl phthalate, and di-(2-ethylhexyl) phthalate from river sediment in Taiwan

We investigated anaerobic degradation rates for three phthalate esters (PAEs), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), and di-(2-ethylhexyl) phthalate (DEHP), from river sediment in Taiwan. The respective anaerobic degradation rate constants for DEP, DBP, and DEHP were observed as 0.045, 0.074, and 0.027 1/day, with respective half-lives of 15.4, 9.4, and 25.7 days under optimal conditions of 30 °C and pH 7.0. Anaerobic degradation rates were enhanced by the addition of the surfactants brij 35 and triton N101 at a concentration of 1 critical micelle concentration (CMC), and by the addition of yeast extract. Degradation rates were inhibited by the addition of acetate, pyruvate, lactate, FeCl₃, MnO₂, NaCl, heavy metals, and nonylphenol. Our results indicate that methanogen, sulfate-reducing bacteria, and eubacteria are involved in the degradation of PAEs.     

添加粉煤灰对污泥比阻影响的研究

污泥脱水是污泥处理中重要的一环。本研究采用电厂废弃物粉煤灰对未脱水污泥改性，经过改性的污泥比阻降低，改善污泥脱水性能，并对产生这一现象的机制进行了探讨。     

生物炭/铁酸镧磁性复合材料的制备及对亚甲基蓝的吸附性能

为获得吸附性能良好、便于回收利用的新型吸附剂以处理染料废水,采用超声辅助溶胶-凝胶法将铁酸镧(LaFeO_3)经过一步热解负载于生物炭制得生物炭/LaFeO_3磁性复合材料(BC/FL)。其表面形态、结构和组成分析表明:BC/FL的比表面积、总孔容及平均孔径分别为34.67m2/g、0.041cm3/g和7.82nm,磁饱和强度达到40.283A/m,表面含有C=O、C=C=N、C≡C等官能团。批量吸附实验表明,25℃下,当亚甲基蓝(MB)的初始质量浓度为30mg/L时,BC/FL的最佳投加量为1.5g/L,吸附反应在120min达到平衡,去除率可达92.3%,且吸附效果基本不受pH影响。BC/FL对MB的吸附符合准二级动力学模型,Langmuir模型可描述其等温吸附过程。化学吸附占主导地位,主要机理为静电吸附、氢键和π-π共轭作用。吸附反应为单分子层吸附且为自发的吸热过程。     

南亚国际河流及其水资源开发

本文全面介绍了南亚地区的主要国际河流,印度河、恒河和布拉马普特拉河水资源开发的地理和历史背景。详细评述了印度河用水争端的来龙去脉和印度河条约的谈判和签署过程,以及印度与巴基斯坦和孟加拉在分享印度河和恒河水资源问题上的立场,笔者还分析了南亚国际河流水资源开发的现状,提出了流域综合开发,以合理利用水资源的建议。 文章中,笔者简要介绍了国际法律界经常采用的水资源分享的理论和学说。     

Incineration of paper sludge in a prototype vortexing fluidized bed combustor

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.     

The organic precursors affecting the formation of disinfection by-products with chlorine dioxide

The object of this research was to study the formation of disinfection by-products by using chlorine dioxide (ClO2) as a disinfectant reacting with different properties of organic substance in natural aquatic environment. The adsorbent resin (XAD-4, XAD-7) was used to divide the organic matters in raw water into three groups. The influence of the function groups on structure, reaction tendency, and formation of disinfection by-products generated by the reaction of these organic substances with chlorine dioxide was explored. The experimental results show that the three different organic groups formed using adsorbent resin were hydrophobic substance, hydrophilic acid, and non-acid hydrophilics in proportions of 43%, 41%, and 16%, respectively. Within the raw water in our study, the hydrophilic substance had a higher distribution proportion than that described in general articles and journals, which indicates that this water was contaminated with pollution from human beings. The exploration of the reactivity of the three different organic substances with chlorine dioxide shows that the unit consumption of disinfection agent per unit organic matters (represented by ClO2/DOC) is in the following sequence hydrophobic substance > hydrophilic substance > non-acid hydrophilics. It indicated that larger molecular organic precursors had larger consumption of disinfectant. We also discovered that after the reaction of the three different organic substances with chlorine dioxide, the largest amount of disinfection by-products were generated by the non-acid hydrophilics.     

Ozone predictions in Atlanta, Georgia: analysis of the 1999 ozone season

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Laboratory and field evaluation of measurement methods for one-hour exposures to O3, PM2.5, and CO.

While researchers have linked acute (less than 12-hr) ambient O3, PM2.5, and CO concentrations to a variety of adverse health effects, few studies have characterized short-term exposures to these air pollutants, in part due to the lack of sensitive, accurate, and precise sampling technologies. In this paper, we present results from the laboratory and field evaluation of several new (or modified) samplers used in the "roll-around" system (RAS), which was developed to measure 1-hr O3, PM2.5, and CO exposures simultaneously. All the field evaluation data were collected during two sampling seasons: the summer of 1998 and the winter of 1999. To measure 1-hr O3 exposures, a new active O3 sampler was developed that uses two nitrite-coated filters to measure O3 concentrations. Laboratory chamber tests found that the active O3 sampler performed extremely well, with a collection efficiency of 0.96 that did not vary with temperature or relative humidity (RH). In field collocation comparisons with a reference UV photometric monitor, the active O3 sampler had an effective collection efficiency ranging between 0.92 and 0.96 and a precision for 1-hr measurements ranging between 4 and 6 parts per billion (ppb). The limits of detection (LOD) of this method were 9 ppb-hr for the chamber tests and approximtely 16 ppb-hr for the field comparison tests. PM2.5 and CO concentrations were measured using modified continuous monitors--the DustTrak and the Langan, respectively. A size-selective inlet and a Nafion dryer were placed upstream of the DustTrak inlet to remove particles with aerodynamic diameters greater than 2.5 microm and to dry particles prior to the measurements, respectively. During the field validation tests, the DustTrak consistently reported higher PM2.5 concentrations than those obtained by the collocated 12-hr PM2.5 PEM samples, by approximately a factor of 2. After the DustTrak response was corrected (correction factor of 2.07 in the summer and 2.02 in the winter), measurements obtained using these methods agreed well with R2 values of 0.87 in the summer and 0.81 in the winter. The results showed that the DustTrak can be used along with integrated measurements to measure the temporal and spatial variation in PM2.5 exposures. Finally, during the field validation tests, CO concentrations measured using the Langan were strongly correlated with those obtained using the reference method when the CO levels were above the LOD of the instrument [approximately 1 part per million (ppm)].     

Biodegradation of benzene, toluene; and other aromatic compounds by Pseudmonas sp. D8

Pseudmonas sp. D8 strain, which has the potential to utilize toluene as a sole carbon source, was isolated. At a concentration of 100 mg/l, this strain was found to efficiently degrade toluene and benzene (both individually and in mixture) in culture medium at 30°C and pH7. Following a two-hour lag phase, complete biodegradation of 100 mg/l toluene or benzene occurred within 6 to 8 hours. The addition of nitrate, phosphate, or sulfate at various concentrations were found to have significant influence on both toluene and benzene degradation. In addition, results show that the D8 strain has the ability to degrade monochlorophenols, nitrophenols, and phenol, but not aliphatic compounds. Inoculation of groundwater samples containing 100 mg/1 toluene or benzene with Pseudmonas sp. D8 resulted in rapid degradation within 24 33 hours.     

Bio-oxidation of airborne volatile organic compounds in an activated sludge aeration tank

An activated sludge aeration tank (40 x 40 x 300 cm, width x length x height) with a set of 2-mm orifice air spargers was used to treat gas-borne volatile organic compounds (VOCs; toluene, p-xylene, and dichloromethane) in air streams. The effects of liquid depth (Z), aeration intensity (G/A), the overall mass-transfer rate of oxygen in clean water (KLaO2), the Henry's law constant of the tested VOC (H), and the influent gaseous VOC concentration (C0) on the efficiency of removal of VOCs were examined and compared with a literature-cited model. Results show that the measured VOC removal efficiencies and those predicted by the model were comparable at a G/A of 3.75-11.25 m3/m2 hr and C0 of approximately 1000-6000 mg/m3. Experimental data also indicated that the designed gas treatment reactor with KLaO2 = 5-15 hr(-l) could achieve > 85% removal of VOCs with H = 0.24-0.25 at an aerated liquid depth of 1 m and > 95% removal of dichloromethane with H = 0.13 at a 1-m liquid depth.