Development of a new standardised method for sustainable monitoring of the vulnerable pink sea fan Eunicella verrucosa

The aim of this survey was to test a standardised method to follow the demographic evolution of a dense aggregative ‘forest’ population of the temperate gorgonian Eunicella verrucosa (Octocorallia, Gorgoniidae) using in situ photographic recordings. Distribution, density, growth and demographic evolution of the colonies was compared along two parallel transects. Computer treatment allowed the estimation of the total branch fan surface area, and the individual growth of tagged colonies was determined by measuring the increase in this surface area, using consecutive photographs taken at two-year intervals. To integrate the potential bias of branch overlapping, we proposed a correction factor between the in situ photographic surface area and the surface area of the gorgonian calculated from ex situ photographic surface area with all branches deployed. The surface-frequency distribution of colonies was converted to estimated-age-frequency distribution using an estimated growth curve based on the net growth rate. The technique used revealed significant differences in population structure and the dynamics of gorgonian colonies, as the two transects appeared to be influenced by different environmental conditions. The recruitment also seemed to vary according to year and transect, resulting in different densities. Our work showed clear results in characterising the variations of gorgonian demographic evolution at a small spatial scale; thus, it is assumed that this method could be a sustainable tool for coastal environmental managers.     

废轮胎与煤共热解失重特性研究

采用热解重量分析法研究了废轮胎粉、炼焦煤粉(简称煤粉)及混合样的热解特性。实验结果表明,废轮胎粉的热解出现三个显著的失重峰,煤粉热解仅出现一个显著失重峰。与煤粉热解相比,废轮胎粉热解开始失重温度和失重基本结束的温度相对较低,失重速率较大,且失重量较大。煤粉与废轮胎粉的显著失重存在重叠的温度区间(360～450℃),说明废轮胎粉与煤粉可以进行共热解。随废轮胎粉质量分数增加,共热解物料总失重率增加。废轮胎粉与煤粉共热解存在协同效应,在280～540℃时协同效应抑制共热解挥发分的逸出,导致失重量降低,最大失重速率峰温升高;高于540℃后,协同效应促进共热解反应,使共热解总失重率增大。     

Use of Congeneric Assessment to Reveal the Linked Genetic Histories of Two Threatened Fishes in the Murray‐Darling Basin,Australia

Abstract: The intensely regulated Murray‐Darling Basin in southeastern Australia is the nation's most extensive and economically important river system, and it contains fragmented populations of numerous fish species. Among these is the Murray hardyhead (Craterocephalus fluviatilis), a species listed as endangered (International Union for Conservation of Nature Red List) in the mid‐1990s prior to its acute decline with the progression of a severe drought that began in 1997. We compared the genetic structure of Murray hardyhead with 4 congeneric species (Darling hardyhead[C. amniculus], Finke hardyhead[C. centralis], Lake Eyre hardyhead[C. eyresii], and unspecked hardyhead[C. stercusmuscarum]), selected on the basis of their taxonomic or biological similarity to Murray hardyhead, in order to affirm species boundaries and test for instances of introgressive hybridization, which may influence species ecology and conservation prospects. We used allozyme (52 loci) and mtDNA markers (1999 bp of ATPase and cytochrome b) to provide a comparative genetic assessment of 139 Murray hardyhead, which represented all extant and some recently extirpated populations, and 71 congeneric specimens from 12 populations. We confirmed that Murray hardyhead and Darling hardyhead are taxonomically distinct and identified a number of potential conservation units, defined with genetic criteria, in both species. We also found allozyme and mtDNA evidence of historic genetic exchange between these 2 allopatric species, apparently involving one population of each species at the geographic edge of the species’ ranges, not in the most proximate populations sampled. Our results provide information on species boundaries and offer insight into the likely causes of high genetic diversity in certain populations, results which are already being used to guide national recovery planning and local action. Given the prevalence of incorrect taxonomies and introgression in many organismal groups, we believe these data point to the need to commence genetic investigations of any threatened species from an initially broad taxonomic focus.     

Effects of environmental parameters on the oxygen consumption of four marine invertebrates: a comparative factorial study

The oxygen consumption curves of two decapod crustaceans (Palaemon serratus, Penaeus monodon) and two prosobranch molluscs (Trunculariopsis trunculus, Nassarius mutabilis) have been detected in the entire pO₂ interval from 0 to 160 mmHg, under different conditions of temperature and salinity. From the experimental curves, physiological parameters such as the initial oxygen consumption velocity, the Q ₁₀ values and the oxygen independence indices have been measured. The latter parameters have been obtained using normalised plots which allow their better evaluation. The effects of temperature, salinity and oxygen partial pressure on the oxygen-consumption features have been studied using a factorial experimental plan which allows measurement of the effects of each experimental variable as well as the effects of synergistic interactions between different variables. Received: 27 March 2000 / Accepted: 13 November 2000     

Changing environmental strategies over time: an empirical study of the steel industry in the United States.

This study investigates how environmental strategies change over time. We submit evidence from the US steel industry that firms have modified their strategies over time. We offer that US industry passed through three stages--cost minimization, cost-effective compliance, and beneficial environmental controls. We compare typologies of environmental strategies and choose that of C. Oliver as the most appropriate. We investigate how environmental strategies in the steel industry changed over time a 4-year period. We offer that a further understanding of Oliver's strategies may increase understanding of the relationship between business and government on environmental issues. One over-arching problem in our field is the need to adequately operationalize how firms change strategies and pass through different stages. We hope that our study will help future researchers and practitioners better articulate the concepts of environmental strategies over time. Our study focused on the steel industry in the United States. We chose the US steel industry as one of the major environmental actors in the United States. The United States Environmental Protection Agency ranks the iron and steel industry as the largest industrial source of toxic environmental contamination. We encourage researchers to evaluate and test our methodology and findings in other contexts--both in other nations and different industries.     

Catchment-wide assessment of the cost-effectiveness of stormwater remediation measures in urban areas

The cost effectiveness of catchment-wide funding for the environmental remediation of urban waterways on the scale of a major metropolitan catchment is examined considering the typical land-use and pollutant-export characteristics of urban catchments. The evaluation is performed by comparing the effectiveness of the major stormwater treatment modes for the pollutants of concern with the proportion of pollutant export to which the measure applies. The heavy metals copper, lead, and zinc in the aqueous phase or bound to fine particulates are identified as representative of the pollutants of concern in drainage from urban catchments. The analysis suggests that these priority pollutants are predominantly (79–87%) derived from runoff from residential property and roads as disseminated urban surfaces. Analysis of a specific case of catchment-wide funding of stormwater remediation in the Sydney Harbour catchment, Australia reveals that the funding allocation cannot be expected to have achieved reductions in the loads of priority pollutants due to the types of treatment measures implemented and the sources addressed. The apportionment of funding in better accordance with the maximum potential effectiveness of stormwater treatment modes and the pollutant-export characteristics of urban catchments could thus be expected to achieve a more cost-effective result from such funding initiatives.     

Investigations of biological processes in Austrian MBT plants

Mechanical biological treatment (MBT) of municipal solid waste (MSW) has become an important technology in waste management during the last decade. The paper compiles investigations of mechanical biological processes in Austrian MBT plants. Samples from all plants representing different stages of degradation were included in this study. The range of the relevant parameters characterizing the materials and their behavior, e.g. total organic carbon, total nitrogen, respiration activity and gas generation sum, was determined. The evolution of total carbon and nitrogen containing compounds was compared and related to process operation. The respiration activity decreases in most of the plants by about 90% of the initial values whereas the ammonium release is still ongoing at the end of the biological treatment. If the biogenic waste fraction is not separated, it favors humification in MBT materials that is not observed to such extent in MSW. The amount of organic carbon is about 15% dry matter at the end of the biological treatment.     

Exposure to inhaled THM: Comparison of continuous and event-specific exposure assessment for epidemiologic purposes

Trihalomethanes (THMs) (chloroform, bromoform, dibromochloromethane, and bromodichloromethane) are the most abundant by-products of chlorination. People are exposed to THMs through ingestion, dermal contact and inhalation. The objective of this study was to compare two methods for assessing THM inhalation: a direct method with personal monitors assessing continuous exposure and an indirect one with microenvironmental sampling and collection of time–activity data during the main event exposures: bathing, showering and swimming. This comparison was conducted to help plan a future epidemiologic study of the effects of THMs on the upper airways of children. 30 children aged from 4 to 10 years were included. They wore a 3M^™ 3520 organic vapor monitor for 7 days. We sampled air in their bathrooms (during baths or showers) and in the indoor swimming pools they visited and recorded their time–activity patterns. We used stainless steel tubes full of Tenax^® to collect air samples. All analyses were performed with Gas Chromatography and Mass Spectrometry (GC-MS). Chloroform was the THM with the highest concentrations in the air of both bathrooms and indoor swimming pools. Its continuous and event exposure measurements were significantly correlated (r_s = 0.69 p < 0.001). Continuous exposures were higher than event exposures, suggesting that the event exposure method does not take into account some influential microenvironments. In an epidemiologic study, this might lead to random exposure misclassification, thus underestimation of the risk, and reduced statistical power. The continuous exposure method was difficult to implement because of its poor acceptability and the fragility of the personal monitors. These two points may also reduce the statistical power of an epidemiologic study. It would be useful to test the advantages and disadvantages of a second sample in the home or of modeling the baseline concentration of THM in the home to improve the event exposure method.     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.