Brazil’s Amazonian forest carbon: the key to Southern Amazonia’s significance for global climate

Southern Amazonia is the first region of Brazil’s Amazon area to be exposed to intensive conversion to agriculture and ranching. This conversion emits greenhouse gases from the carbon stock in the biomass and soils of the previous vegetation. Quantifying these carbon stocks is the first step in quantifying the impact on global warming from this conversion. This review is limited to information on Brazilian Amazonia’s carbon stocks. It indicates large amounts of carbon at risk of emission in both biomass and soils, as well as considerable uncertainty in estimates. Reducing uncertainty is a priority for research but the existence of uncertainty must not be used as an excuse for delaying measures to contain deforestation. The magnitude of carbon stocks is proportional to greenhouse gas emissions per hectare of deforestation and consequently to impact on global climate.

     

Lake Water Levels and Associated Hydrologic Characteristics in the Conterminous U.S.

Establishing baseline hydrologic characteristics for lakes in the United States (U.S.) is critical to evaluate changes to lake hydrology. We used the U.S. Environmental Protection Agency National Lakes Assessment 2007 and 2012 surveys to assess hydrologic characteristics of a population of ~45,000 lakes in the conterminous U.S. based on probability samples of ~1,000 lakes/yr distributed across nine ecoregions. Lake hydrologic study variables include water‐level drawdown (i.e., vertical decline and horizontal littoral exposure) and two water stable isotope‐derived parameters: evaporation‐to‐inflow (E:I) and water residence time. We present (1) national and regional distributions of the study variables for both natural and man‐made lakes and (2) differences in these characteristics between 2007 and 2012. In 2007, 59% of the population of U.S. lakes had Greater than normal or Excessive drawdown relative to water levels in ecoregional reference lakes with minimal human disturbances; whereas in 2012, only 20% of lakes were significantly drawn down beyond normal ranges. Water isotope‐derived variables did not differ significantly between survey years in contrast to drawdown. Median E:I was 20% indicating that flow‐through processes dominated lake water regimes. For 75% of U.S. lakes, water residence time was less than one year and was longer in natural vs. man‐made lakes. Our study provides baseline ranges to assess local and regional lake hydrologic status and inform management decisions in changing environmental conditions.     

Potential negative consequences of adding phosphorus-based fertilizers to immobilize lead in soil

A study of the potential negative consequences of adding phosphate (P)-based fertilizers as amendments to immobilize lead (Pb) in contaminated soils was conducted. Lead-contaminated firing range soils also contained elevated concentrations of antimony (Sb), a common Pb hardening agent, and some arsenic (As) of unknown (possibly background) origin. After amending the soils with triple superphosphate, a relatively soluble P source, column leaching experiments revealed elevated concentrations of Sb, As, and Pb in the leachate, reflecting an initial spike in soluble Pb and a particularly dramatic increase in Sb and As mobility. Minimal As, Sb, and Pb leaching was observed during column tests performed on non-amended control soils. In vitro extractions tests were performed to assess changes in Pb, As, and Sb bioaccessibility on P amendment. Lead bioaccessibility was systematically lowered with increasing P dosage, but there was much less of an effect on As and Sb bioaccessibility than on mobility. Our results indicate that although P amendments may aid in lowering the bioaccessibility of soil-bound Pb, it may also produce an initial increase in Pb mobility and a significant release of Sb and As from the soil, dramatically increasing their mobility and to a lesser extent their bioavailability.     

Decreasing lead bioaccessibility in industrial and firing range soils with phosphate-based amendments

In-situ stabilization using phosphate (P) amendments, such as P-based fertilizers and rock, are a potentially cost-effective and minimally disruptive alternative for stabilizing Pb in soils. We examined the effect of time (0-365 d), in vitro extraction pH (1.5 vs. 2.3), and dosage of three P-based amendments on the bioaccessibility (as a surrogate for oral bioavailability) of Pb in 10 soils from U.S. Department of Defense facilities. Initial untreated soil bioaccessibility consistently exceeded the U.S. Environmental Protection Agency default value of 60% relative bioavailability, with higher bioaccessibility consistently observed at an in vitro extraction pH of 1.5 vs. 2.3. Although P-based amendments statistically (P < 0.05) reduced bioaccessibility in many instances, with reductions dependent on the amendment and dosage, large amendment dosages (approximately 20-25% by mass to yield 5% P by mass) were required to reduce average bioaccessibility by approximately 25%. For most amendment combinations, reductions continued to occur for periods up to 1 yr, indicating that the observed reductions were not merely experimental artifacts of the in vitro extraction procedure. Although our results indicated that reductions in Pb bioaccessibility with P amendments are technically feasible, relatively large amendment masses were required to achieve relatively modest reductions in bioaccessibility. The cost and potential environmental implications of adding such large amounts of P may limit the practicality of in situ immobilization for some Pb-contaminated soils, industrial and firing range soils in particular.     

Characteristics of coal mine ventilation air flows

Coal mine methane (CMM) is not only a greenhouse gas but also a wasted energy resource if not utilised. Underground coal mining is by far the most important source of fugitive methane emissions, and approximately 70% of all coal mining related methane is emitted to the atmosphere through mine ventilation air. Therefore, research and development on mine methane mitigation and utilisation now focuses on methane emitted from underground coal mines, in particular ventilation air methane (VAM) capture and utilisation. To date, most work has focused on the oxidation of very low concentration methane. These processes may be classified based on their combustion kinetic mechanisms into thermal oxidation and catalytic oxidation. VAM mitigation/utilisation technologies are generally divided into two basic categories: ancillary uses and principal uses. However, it is possible that the characteristics of ventilation air flows, for example the variations in methane concentration and the presence of certain compounds, which have not been reported so far, could make some potential VAM mitigation and utilisation technologies unfeasible if they cannot cope with the characteristics of mine site ventilation air flows. Therefore, it is important to understand the characteristics of mine ventilation air flows. Moreover, dust, hydrogen sulphide, sulphur dioxide, and other possible compounds emitted through mine ventilation air into the atmosphere are also pollutants. Therefore, this paper presents mine-site experimental results on the characteristics of mine ventilation air flows, including methane concentration and its variations, dust loadings, particle size, mineral matter of the dust, and other compounds in the ventilation air flows. The paper also discusses possible correlations between ventilation air characteristics and underground mining activities.     

A calcite permeable reactive barrier for the remediation of Fluoride from spent potliner (SPL) contaminated groundwater

The use of calcite (CaCO3) as a substrate for a permeable reactive barrier (PRB) for removing fluoride from contaminated groundwater is proposed and is illustrated by application to groundwater contaminated by spent potliner leachate (SPL), a waste derived from the aluminium smelting process. The paper focuses on two issues in the implementation of calcite permeable reactive barriers for remediating fluoride contaminated water: the impact of the groundwater chemical matrix and CO2 addition on fluoride removal. Column tests comparing pure NaF solutions, synthetic SPL solutions, and actual SPL leachate indicate that the complex chemical matrix of the SPL leachate can impact fluoride removal significantly. For SPL contaminant mixtures, fluoride removal is initially less than expected from idealized, pure, solutions. However, with time, the effect of other contaminants on fluoride removal diminishes. Column tests also show that pH control is important for optimizing fluoride removal with the mass removed increasing with decreasing pH. Barrier pH can be regulated by CO2 addition with the point of injection being critical for optimising the remediation performance. Experimental and model results show that approximately 99% of 2300 mg/L fluoride can be removed when CO2 is injected directly into the barrier. This can be compared to approximately 30-50% removal when the influent solution is equilibrated with atmospheric CO2 before contact with calcite.     

Geographical and pedological drivers of distribution and risks to soil fauna of seven metals (Cd, Cu, Cr, Ni, Pb, V and Zn) in British soils

Concentrations of seven metals were measured in over 1000 samples as part of an integrated survey. Sixteen metal pairs were significantly positively correlated. Cluster analysis identified two clusters. Metals from the largest (Cr, Cu, Ni, V, Zn), but not the smallest (Cd, Pb) cluster were significantly negatively correlated with spatial location and soil pH and organic matter content. Cd and Pb were not correlated with these parameters, due possibly to the masking effect of recent extensive release. Analysis of trends with soil properties in different habitats indicated that general trends may not necessarily be applicable to all areas. A risk assessment indicated that Zn poses the most widespread direct risk to soil fauna and Cd the least. Any risks associated with high metal concentrations are, however, likely to be greatest in habitats such as arable and horticultural, improved grassland and built up areas where soil metal concentrations are more frequently elevated.     

Apportionment of ambient primary and secondary fine particulate matter at the Pittsburgh National Energy Laboratory particulate matter characterization site using positive matrix factorization and a potential source contributions function analysis

Fine particulate matter (PM2.5) concentrations associated with 202 24-hr samples collected at the National Energy Technology Laboratory (NETL) particulate matter (PM) characterization site in south Pittsburgh from October 1999 through September 2001 were used to apportion PM2.5 into primary and secondary contributions using Positive Matrix Factorization (PMF2). Input included the concentrations of PM2.5 mass determined with a Federal Reference Method (FRM) sampler, semi-volatile PM2.5 organic material, elemental carbon (EC), and trace element components of PM2.5. A total of 11 factors were identified. The results of potential source contributions function (PSCF) analysis using PMF2 factors and HYSPLIT-calculated back-trajectories were used to identify those factors associated with specific meteorological transport conditions. The 11 factors were identified as being associated with emissions from various specific regions and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. Three sources associated with transport from coal-fired power plants to the southeast, a combination of point sources to the northwest, and a steel mill and associated sources to the west were identified. In addition, two secondary-material-dominated sources were identified, one was associated with secondary products of local emissions and one was dominated by secondary ammonium sulfate transported to the NETL site from the west and southwest. Of these 11 factors, the four largest contributors to PM2.5 were the secondary transported material (dominated by ammonium sulfate) (47%), local secondary material (19%), diesel combustion emissions (10%), and gasoline combustion emissions (8%). The other seven factors accounted for the remaining 16% of the PM2.5 mass. The findings are consistent with the major source of PM2.5 in the Pittsburgh area being dominated by ammonium sulfate from distant transport and so decoupled from local activity emitting organic pollutants in the metropolitan area. In contrast, the major local secondary sources are dominated by organic material.     

Guidelines for Subspecific Substitutions in Wildlife Restoration Projects

Reintroduction of animals is becoming increasingly popular as a means of restoring populations of threatened species. Sometimes depletion of wild populations leaves only captive populations from which reintroduction projects can obtain founders for releases. The World Conservation Union guidelines on reintroductions recommend that the individuals to be reintroduced should be of the same subspecies as those that were extirpated. In some cases, however, a subspecies may have become extinct in the wild and in captivity. A substitute form may then be chosen for possible release. Such substitutions are actually a form of benign introduction. Considerations include assessment of the value of a substitution project and the selection of a suitable substitute. Species substitutions increase biodiversity, conserve related forms, improve public awareness of conservation issues, educate the public, and may be implemented for aesthetic or economic reasons. Selection of a suitable substitute should focus on extant subspecies and consider genetic relatedness, phenotype, ecological compatibility, and conservation value of potential candidates. An example of a substitution project is the reintroduction of the North African Red-necked Ostrich (  Struthio camelus camelus ) into areas once occupied by the now extinct Arabian Ostrich (  Struthio camelus syriacus ). S. c. camelus was chosen as a substitute because of its geographic proximity, phenotypic similarity, and conservation value. The World Conservation Union's reintroduction guidelines should be consulted before a project is begun.     

No Inbreeding Depression Observed in Mexican and Red Wolf Captive Breeding Programs

Abstract: Inbreeding depression is expected to affect populations of outbreeding mammals in inverse proportion to their population size and can affect whether small populations persist or go extinct. We used studbook records to examine the effect of inbreeding upon juvenile viability and litter size in two endangered species that have recently been reintroduced to the wild: the Mexican wolf ( Canis lupus baileyi ) and the red wolf ( C. rufus ). We found that neither juvenile viability nor litter size was lowered by inbreeding in either taxon. In fact, both captive breeding programs appear to have less lethal equivalents than the median estimate for mammals. We did find that year of birth was correlated with increasing viability in both taxa. We conclude that there is no evidence that inbreeding depression will prove a major obstacle to the success of either recovery effort.