夏季持续高温天气对北京市大气细粒子(PM2.5)的影响

在1999-06-23北京市出现长达13d的持续高温期间对细粒子(PM_2.5)质量浓度进行了观测.数据表明,持续高温期间细粒子质量浓度比非高温期间要高出2～3倍.但是通过对持续高温期间的气象数据进行分析,发现还是很利于污染物扩散.进一步分析同步监测的O₃浓度、颗粒物中SO₄^2-的粒径范围及其含量等数据,发现夏季持续高温期间活跃的光化学反应应该是北京市细粒子的主要来源.     

聚丙烯酰胺对聚合物驱含油污水中油珠沉降分离的影响

研究发现阴离子聚丙烯酰胺(HPAM)对聚合物驱含油污水处理有正反2方面影响.聚合物能增加污水粘度,降低油珠上浮速度,而且聚合物能增加油水界面水膜强度,延缓油珠聚并时间,这是聚合物对油珠沉降分离的不利影响;同时,聚丙烯酰胺具有絮凝性,能将水中油珠连接到一起,有利于油珠聚并.当聚丙烯酰胺相对分子质量为2.72×10⁶,浓度小于800mg/L时,絮凝作用大于粘度作用,有利于油珠的沉降分离.初始油珠粒径小是聚合物驱含油污水难处理的主要原因.横向流除油器可以加速油珠聚并,缩短沉降时间,适合处理聚合物驱含油污水.     

絮凝剂用壳聚糖的中试生产研究

在实验室制备絮凝剂用壳聚糖的基础上,按工业化生产的要求对壳聚糖进行了中试生产研究.经正交试验确定了生产过程中脱钙、脱蛋白、脱乙酰等3步反应的最佳工艺参数. 由此中试工艺生产的壳聚糖的生产成本比国内同类产品下降了22%,生产周期缩短了66%,且主要性能指标均达到或超过国内外同类产品的水平.     

北京市大气细粒子的来源分析

细粒子(空气动力学直径小于2.5μm的颗粒物)污染是许多城市重要的大气环境问题.从1999年至2000年对北京市细粒子展开了4次采样和化学分析,有效采样天数为40d.利用正定矩阵分解(PMF)方法对细粒子的来源进行了分析.化学成分包括EC(元素碳)、有机物、SO₄^2-、F^-、Cl^-、Fe、Ca、K、Mg、Al、Na、Zn、Mn、Ti、Pb、Ba和P等17种.发现主要来源有6类:地面扬尘、建筑源、生物质燃烧、二次源、机动车排放和燃煤.     

序言

<正>"环境计算化学与预测毒理学"是近年来在环境化学、环境毒理学、计算化学、计算生物学和分子生物学等学科之间形成的一个新兴的前沿研究领域,主要应用计算化学和大数据分析的方法开展化学品在环境介质中的转化行为、毒物在生物体内与大分子的相互作用机制以及毒性预测等方面的工作,已成为研究化学污染物的环境行为、毒理作用机制的重要手段,也是化学品生态风险评价与管理的必要工具,可为环境友好的     

微塑料对环境中有机污染物吸附解吸的研究进展

微塑料已成为新的全球性环境污染问题。作为强吸附剂,微塑料可以吸附共存的有机污染物,进而改变其环境行为和毒性;也可以通过解吸作用促进污染物在不同介质中的迁移。因而,微塑料与有机污染物的相互作用强度和机理是全面评估两者的环境风险和深度研究微塑料毒性机制的必要信息。目前微塑料研究处于快速发展的起始阶段,加之微塑料本身成分、粒径、表面风化情况的复杂性及共存有机污染物的多样性使两者的相互作用十分复杂,亟需理清微塑料吸附解吸作用的影响因素和相关机制。因而,本文详细综述了微塑料对有机污染物吸附解吸作用的研究进展,并着重从微塑料性质(成分、粒径和表面风化)、有机污染物性质和水环境介质性质方面探讨了吸附的影响因素和相互作用机制,希望为微塑料吸附有机污染物及吸附的后续影响研究提供借鉴与参考。     

Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

CNT-TiO₂ composite is used to activate PMS under UV-light assistance. Superior performance is due to the enhanced electron-transfer ability of CNT. SO₄•⁻, •OH and ¹O₂ play key roles in the degradation of organic pollutants. In this work, a UV-light assisted peroxymonosulfate (PMS) activation system was constructed with the composite catalyst of multi-walled carbon nanotubes (CNT) - titanium dioxide (TiO₂). Under the UV light irradiation, the photoinduced electrons generated from TiO₂ could be continuously transferred to CNT for the activation of PMS to improve the catalytic performance of organic pollutant degradation. Meanwhile, the separation of photoinduced electron-hole pairs could enhance the photocatalysis efficiency. The electron spin resonance spectroscopy (EPR) and quenching experiments confirmed the generation of sulfate radical (SO₄•⁻), hydroxyl radical (•OH) and singlet oxygen (¹O₂) in the UV/PMS/20%CNT-TiO₂ system. Almost 100% phenol degradation was observed within 20 min UV-light irradiation. The kinetic reaction rate constant of the UV/PMS/20%CNT-TiO₂ system (0.18 min⁻¹) was 23.7 times higher than that of the PMS/Co₃O₄ system (0.0076 min⁻¹). This higher catalytic performance was ascribed to the introduction of photoinduced electrons, which could enhance the activation of PMS by the transfer of electrons in the UV/PMS/CNT-TiO₂ system.     

Effects of cultivation strategies on the cultivation of Chlorella sp. HQ in photoreactors

Heterotrophic cultivation caused high level of ROS and high lipids accumulation. HMTC is the best culture strategy for improving the microalgal biomass. Chlorella sp. HQ had great nutrient removal capacity under five culture strategies. The effects of cultivation strategies (including autotrophic cultivation (AC), heterotrophic cultivation (HC), fed-batch cultivation (FC), heterotrophic+ autotrophic two-stage cultivation (HATC), and heterotrophic+ mixotrophic two-stage cultivation (HMTC)) on the growth and lipid accumulation of Chlorella sp. HQ and its total nitrogen (TN) and total phosphorus (TP) removal in secondary effluent were investigated in column photoreactors. The results showed that the TN and TP removal rates ranged between 93.72%–95.82% and 92.73%–100%, respectively, under the five different strategies. The microalgal growth potential evaluated by the maximal growth rate (R_max) was in the order of HMTC>HC>FC>AC>HATC. The values of biomass, total lipid yield, triacylglycerols (TAGs) yield, and total lipid content of the microalga cultivated in the last 5 d increased significantly, but the TAGs productivities of the five strategies were lower than those in the first 7 d. Compared with all the other cultivation strategies, the TAGs productivity and yield after 12 d of cultivation under the heterotrophic condition reached the highest values accompanying the highest level of intracellular reactive oxygen species (ROS), in which the TAGs yield reached 40.81 mg/L at the end of the cultivation period. The peaks in TAGs yield and ROS level suggested that HC was beneficial for lipids accumulation via regulating the cellular redox status and exerting ROS stress on microalgal cells. In summary, HMTC was the best cultivation strategy for improving the microalgal biomass and HC was the best strategy for microalgal TAGs accumulation to produce biodiesel.     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Interactive effects of single,binary and trinary trace metals (lead,zinc and copper) on the physiological responses of Kandelia obovata seedlings

Environmental Geochemistry and Health - Heavy metals are considered important environmental contaminants, and their mixture toxicity on plants has complex mutual interactions. The interactive...