Distribution and partitioning of iron, zinc, and arsenic in surface sediments in the Grande River mouth to Cuitzeo Lake, Mexico

Cuitzeo Lake is one of the largest and most important lakes in Mexico. It receives different types of pollutants through its main tributary, the Grande River of Morelia. The aim of this work was to determine if high concentrations of iron, zinc, and arsenic are present in sediments in an area near the river mouth to the lake, as well as to estimate the partitioning of these metals using a sequential extraction procedure in order to obtain information of their potential bioavailability. Sediment samples were collected from three different sites in Cuitzeo Lake and two sites in Grande River in both dry and wet seasons. A sequential extraction procedure was carried out to determine the concentrations of these elements in different geochemical phases of the sediments. Total metal concentrations were evaluated by using the enrichment factor and the geoaccumulation index. A comparison with sediment quality guidelines and shale values has also been made. The results indicate that sediments are considered unpolluted by iron and moderately polluted by zinc and arsenic. However, fractionation studies showed that significant amounts of Zn and As could be released to the lake ecosystem depending on the environmental conditions, representing a medium risk potential of bioavailability to the biota.     

Spatial dynamics of Mediterranean coastal regions

During recent decades the northern shores of the Mediterranean have experienced a rapid transformation; mainly due to touristic development. At present, more than 25% of the worldÕs hotel accommodation is found in the Mediterranean. This paper presents some figures illustrating the related growth of different sectors of coastal economy, such as housing, tourism, industry and traffic. A better control of these developments is urgently needed. To this end a spatial planning policy should be elaborated which fully incorporates environmental issues. The concept of integrated coastal (zone) management has only recently been introduced in regional and national policies. A classification of spatial dynamics including settlement-environment relationships can stimulate the implementation of integrated planning policies in the coastal belt of the Mediterranean region.     

Seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk from a high altitude pasture in the Italian Alps

The seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk was studied in a high altitude pasture in the Alps (1900 m a.s.l.). PCB contamination in vegetation shows a concentration peak in June, which is mainly interpreted as the consequence of a temporary PCB enrichment of the air layer above the ground due to net emission fluxes from the soil. A three compartment dynamic model was developed to test this hypothesis. The North/South enrichment factor in the vegetation was 1.5-1.6 for penta- and hexa-substituted congeners and 1.7 for hepta- and octa-PCBs, according to the effect of temperature on compounds having higher K_oa values. Milk concentrations followed the vegetation seasonal trend. The congener abundance in milk is in agreement with the biotransformation susceptibility, absorption efficiency and residence time of the different congeners in dairy cows.     

Regional integration and local change: road paving, community connectivity, and social–ecological resilience in a tri-national frontier, southwestern Amazonia

Initiatives for global economic integration increasingly prioritize new infrastructure in relatively remote regions. Such regions have relatively intact ecosystems and provide valuable ecosystem services, which has stimulated debates over the wisdom of new infrastructure. Most prior research on infrastructure impacts highlights economic benefits, ecological damage, or social conflicts. We suggest a more integrative approach to regional integration by appropriating the concepts of connectivity from transport geography and social?Cecological resilience from systems ecology. Connectivity offers a means of observing the degree of integration between locations, and social?Cecological resilience provides a framework to simultaneously consider multiple consequences of regional integration. Together, they offer a spatial analysis of resilience that considers multiple dimensions of infrastructure impacts. Our study case is the southwestern Amazon, a highly biodiverse region which is experiencing integration via paving of the Inter-Oceanic Highway. Specifically, we focus on the ??MAP?? region, a tri-national frontier where Bolivia, Brazil, and Peru meet and which differs in the extent of highway paving. We draw on a tri-national survey of more than 100 resource-dependent rural communities across the MAP frontier and employ indicators for multiple dimensions of connectivity and social?Cecological resilience. We pursue a comparative analysis among regions and subregions with differing degrees of community connectivity to markets in order to evaluate their social?Cecological resilience. The findings indicate that connectivity and resilience have a multifaceted relationship, such that greater community connectivity corresponds to greater resilience in some respects but not others. We conclude by noting how our findings integrate those from heretofore largely disparate literatures on infrastructure. The integration of transport geography with resilience thought thus stands to advance the study of infrastructure impacts.     

Particulate matter in the indoor and outdoor air of a gymnasium and a fronton

An indoor/outdoor monitoring programme of PM₁₀ was carried out in two sports venues (a fronton and a gymnasium). Levels always below 50 μg m^?3 were obtained in the fronton and outdoor air. Due to the climbing chalk and the constant process of resuspension, concentrations above 150 μg m^?3 were registered in the gymnasium. The chalk dust contributed to CO₃ ^2? concentrations of 32?±?9.4 μg m^?3 in this sports facility, which represented, on average, 18 % of the PM₁₀ mass. Here, the carbonate levels were 128 times higher than those registered outdoors. Much lower concentrations, around 1 μg m^?3, were measured in the fronton. The chalk dust is also responsible for the high Mg²⁺ concentrations in the gym (4.7?±?0.89 μg m^?3), unfolding a PM₁₀ mass fraction of 2.7 %. Total carbon accounted for almost 30 % of PM₁₀ in both indoor spaces. Aerosol size distributions were bimodal and revealed a clear dependence on physical activities and characteristics of the sports facilities. The use of climbing chalk in the gymnasium contributed significantly to the coarse mode. The average geometric mean diameter, geometric standard deviation and total number of coarse particles were 0.77 μm, 2.79 cm^?3 and 28 cm^?3, respectively.     

Production and partial characterization of bioemulsifier from a chromium-resistant actinobacteria

Surface-active compounds such as synthetic emulsifiers have been used for several decades, both for the degradation of hydrocarbons and increasing desorption of soil-bound metals. However, due to their high toxicity, low degradability, and production costs unaffordable for use in larger ecosystems, synthetic emulsifiers have been gradually replaced by those derived from natural sources such as plants or microbes. In previous studies, the bacterium Streptomyces sp. MC1 has shown the ability to reduce and/or accumulate Cr(VI), a highly promising advance in the development of methods for environmental clean-up of sites contaminated with chromium. Here, new studies on the production of emulsifier from this strain are presented. The cultivation factors that have a significant influence on emulsifier biosynthesis, as well as the interactions among them, were studied by factorial design. Based upon optimization studies, maximum bioemulsifier production was detected in the culture medium having an initial pH of 8 with phosphate 2.0 g L^?1 and Ca⁺² 1.0 g L^?1 added, with an emulsification index about 3.5 times greater compared to the basal value. Interestingly, in the presence of 5.0 g L^?1 Cr(VI), Streptomyces sp. MC1 retained about 65% of its emulsifier production ability. Partially purified emulsifier presented high thermo-stability and partial water solubility. These findings could have promising future prospects for the remediation of organic- and metal-contaminated sites.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.

Materials and methods

Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.

Results

At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.

Discussion

The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.

Conclusions

It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.

Recommendations and perspectives

In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

     

Effect of pH,ionic strength,and background electrolytes on Cr(VI) and total chromium removal by acorn shell of Quercus crassipes Humb. & Bonpl.

The ability of Quercus crassipes acorn shells (QCS) to remove Cr(VI) and total chromium from aqueous solutions was investigated as a function of the solution pH, ionic strength, and background electrolytes. It was found that Cr(VI) and total chromium removal by QCS depended strongly on the pH of the solution. Cr(VI) removal rate increased as the solution pH decreased. The optimum pH for total chromium removal varied depending on contact time. NaCl ionic strengths lower than 200 mM did not affect chromium removal. The presence of 20 mM monovalent cations and anions, and of divalent cations, slightly decreased the removal of Cr(VI) and total chromium by QCS; in contrast, divalent anions (SO₄ ^2?, PO₄ ^2?, CO₃ ^2?) significantly affected the removal of Cr(VI) and total chromium. The biosorption kinetics of chromium ions followed the pseudo-second-order model at all solution pH levels, NaCl ionic strengths and background electrolytes tested. Results suggest that QCS may be a potential low-cost biosorbent for the removal of Cr(VI) and total chromium from aqueous solutions containing various impurities.     

Pesticide distribution in an agricultural environment in Argentina

An assessment of the off-site migration of pesticides from agricultural activity into the environment in the Neuquen River Valley was performed. The aim of this study was to evaluate the distribution of pesticides in several compartments of a small agricultural sub-catchment. Soil, surface water, shallow groundwater and drift deposition were analyzed for pesticide residues. Results showed the presence of some pesticide residues in soil, surface water and shallow groundwater compartments. The highest detection frequencies in water (surface and subsurface) were found for azinphos-methyl and chlorpyrifos (>70%). In terms of concentration, the highest levels were observed in shallow groundwater for azinphos methyl (22.5 μg/L) and carbaryl (45.7 μg/L). In the soil, even before the application period had started, accumulation of residues was present. These residues increased during the period studied. Spray drift during pesticide application was found to be a significant pathway for the migration of pesticide residues in surface water, while leaching and preferential flows were the main transport routes contributing to subsurface contamination.