Ozone pollution characteristics and sensitivity analysis using an observation-based model in Nanjing, Yangtze River Delta Region of China

Ground-level ozone (O₃) has become a critical pollutant impeding air quality improvement in Yangtze River Delta region of China. In this study, we present O₃ pollution characteristics based on one-year online measurements during 2016 at an urban site in Nanjing, Jiangsu Province. Then, the sensitivity of O₃ to its precursors during 2 O₃ pollution episodes in August was analyzed using a box model based on observation (OBM). The relative incremental reactivity (RIR) of hydrocarbons was larger than other precursors, suggesting that hydrocarbons played the dominant role in O₃ formation. The RIR values for NO_X ranged from –0.41%/% to 0.19%/%. The O₃ sensitivity was also analyzed based on relationship of simulated O₃ production rates with reductions of VOC and NO_X derived from scenario analyses. Simulation results illustrate that O₃ formation was between VOCs-limited and transition regime. Xylenes and light alkenes were found to be key species in O₃ formation according to RIR values, and their sources were determined using the Positive Matrix Factorization (PMF) model. Paints and solvent use was the largest contributor to xylenes (54%), while petrochemical industry was the most important source to propene (82%). Discussions on VOCs and NO_X reduction schemes suggest that the 5% O₃ control goal can be achieved by reducing VOCs by 20%. To obtain 10% O₃ control goal, VOCs need to be reduced by 30% with VOCs/NO_X larger than 3:1.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

不同制备温度下污泥生物炭对Cr(Ⅵ)的吸附特性

以城市剩余污泥为原料,于300,400,500,600 ℃温度条件下制备生物炭,通过单因素静态吸附实验探讨制备温度对生物炭吸附Cr（Ⅵ）的影响。结果表明:在500 ℃以内随着温度上升制备的生物炭对Cr（Ⅵ）的吸附量增加,制备温度高于500 ℃后变化不明显;扫描电镜（SEM）、比表面积（BET）、傅里叶红外光谱（FTIR）表征结果显示,热解温度对生物炭表面形貌和官能团组成有显著影响;等温模型及动力学拟合结果表明,生物炭吸附Cr（Ⅵ）为单分子层吸附、物理-化学复合吸附。热解温度对污泥制备生物炭吸附Cr（Ⅵ）的性能有显著影响,最佳制备温度为500 ℃,在此条件制备的生物炭对Cr（Ⅵ）的理论吸附量可达7.93 mg/g。     

生物气溶胶的吸湿性

归纳了有关气溶胶吸湿性的测量方法以及过去近30a来文献中报道的生物气溶胶吸湿性的主要研究成果,总结了不同种类生物气溶胶之间吸湿性的差异.已有研究表明,绝大部分的生物气溶胶粒子都具有一定的吸湿性,当相对湿度为90%时,吸湿增长因子约为1.04（真菌孢子）~1.22（细菌）,花粉颗粒物吸湿后的质量与之前的比值为1.30~1.55.最后,提出了目前关于生物气溶胶吸湿性研究中尚未解决的科学问题及该领域的主要发展方向.     

污泥与不同pH值渗滤液联合厌氧发酵产氢分析

以污泥与垃圾焚烧厂渗滤液为原料,通过小瓶批式试验,考察了垃圾渗滤液的添加量以及渗滤液初始pH对联合厌氧消化产氢的影响。结果表明:未添加污泥的渗滤液本身也可以在厌氧发酵过程中产氢。而污泥与垃圾渗滤液联合厌氧发酵,当渗滤液初始pH为5.20时,添加90%的渗滤液体系产氢量最大,为201.58 mL,最大产氢速率也最高,为9.56 mL/h;当初始渗滤液pH为4.47时,最大产氢量出现在渗滤液添加剂量为60%的样品,为57.73 mL,随后减小,但最大产氢速率在添加40%的渗滤液达到峰值,为5.11 mL/h。     

铁基质强化新型功能性化粪池高效处理黑水的试验

以铁基质生物载体为核心,将物理、生物和化学方法结合,对化粪池进行功能强化,实现黑水的原位深度处理.探究了溶解氧（DO）和碳氮比（C/N）等因素对黑水中污染物降解的影响,并在最佳运行参数下考察了氮素在系统中的转化机制.结果表明,当C/N为7.3~8.4时,好氧生物铁基质载体池DO为2.3~2.7mg/L时,系统氨氮（NH₄⁺-N）、总氮（TN） 、COD和总磷（TP）的平均去除率分别可达90.74%、85.81%、92.65%和95.78%;当进水C/N降至3.3~4.2时,系统NH₄⁺-N、TN、COD和TP的平均去除率仍可维持在81.16%、76.62%、93.87%和94.75%.铁基质生物载体内电解作用显著强化了化粪池内TN的脱除、COD的氧化和TP的固定.氮素转化机制分析表明,内电解与反硝化菌的耦合强化了反硝化作用,降低了反硝化过程对有机碳源的需求,强化了低C/N条件下TN、TP的脱除.     

长治市沙尘天气污染特征及传输路径解析

以2018年3次沙尘天气为研究对象,分析了PM_2.5和PM₁₀浓度、水溶性离子组分、气象条件和气溶胶光学特征,研究了长治市沙尘天气的典型污染特征和传输路径.结果表明：长治市2018年共8d为受沙尘天气影响日,其中4月份最多（5d）,这与春季大气环流调整,冷暖空气活动频繁有关.沙尘污染发生前一般受西方或西北方冷空气影响,大气层结不稳定,大气环流转为经向环流,平均风速达4m/s以上;沙尘污染过程中PM_2.5/PM₁₀均低于0.3,环境空气中粗颗粒物占比较大,水溶性离子总浓度在PM_2.5中占比下降,Ca²⁺浓度为沙尘污染发生前的4倍以上.冬季沙尘为近地面扩散传输,春夏季沙尘为高空沉降传输,影响范围大,区域传输贡献明显.长治市沙尘重要潜在源区为蒙古国、哈萨克斯坦中部和新疆中北部的荒漠地区,传输路径主要为西北路径和正北路径,其中西北路径为哈萨克斯坦—新疆中北部—内蒙古西部—长治以及新疆中北部—内蒙古西部—长治两条路径,正北路径为蒙古国—内蒙古中部—山西北部—长治.     

Cr(Ⅵ)踪迹指标现场测定用于铬污染地下水源解析

根据研究区地下水样品测试结果,该文选定与Cr(Ⅵ)极强相关,且物理化学性质较稳定的钠离子作为研究地下水中Cr(Ⅵ)迁移规律的踪迹指标,并采用钠离子复合电极建立了踪迹指标现场检测方法。实验结果表明,钠离子浓度在5～500 mg/L线性范围内的电极响应斜率为-61.09 mV/pNa(103%),方法检出限为0.69 mg/L,加标回收率为92.8%～103.4%,现场测试结果与实验室测试结果一致。该研究根据踪迹指标钠离子与污染物现场检测数据,构建了钠离子与Cr(Ⅵ)浓度比值的对数函数,并有效识别出主污染源、次级污染源、污染物迁移主路径、潜在污染区、潜在影响区及背景区,为铬渣类污染场地土壤和地下水环境风险评价及污染修复提供了技术支撑和参考依据。     

矿山排水污染稻田土壤胶体对砷的吸附研究

为研究矿山排水污染土壤胶体对砷的吸附影响,文章以高砷污染区和背景区土壤的胶体在不同的pH、离子强度以及好氧/厌氧淹水条件下对As(Ⅴ)的吸附进行对比试验。结果表明:土壤胶体对As(Ⅴ)的吸附量随pH的增大而减少,且污染区胶体比背景区胶体对As(Ⅴ)的吸附量大;离子强度越大,胶体对As(Ⅴ)的吸附量越大,Ca(NO_3)_2浓度从0.001 mol/L增至0.1 mol/L时,污染区与背景区胶体对As(Ⅴ)的吸附量分别增加了30.57%、50.25%;厌氧淹水后的胶体对As(Ⅴ)的吸附量低于好氧条件下的胶体,解吸量较高,且厌氧淹水后污染区胶体与背景区胶体相比无明显吸附优势,而好氧条件下污染区胶体的解吸率低于背景区胶体,说明厌氧淹水后的胶体不易吸附且易释放As(Ⅴ)。因此,低p H和高离子强度以及好氧的条件有利于土壤胶体对砷的吸附。