Dissipation of epoxiconazole in the paddy field under subtropical conditions of Taiwan

The environmental fate and distribution of fungicide epoxiconazole were studied by a rice paddy field model ecosystem. One week before the head-sprouting stage, rice plant was treated separately once with OPUS (tradename of epoxiconazole) 12% SC 2.1 kg ha(-1) and 1.4 kg ha(-1), respectively. Soil, water and rice plant were sampled seven days intervals nine times after application. The bioconcentration factor of epoxiconazole on mosquito fish in the ecosystem was also determined, based on the amounts of epoxiconazole content both in fish and water. This was initiated one day after the fungicide treatment, and continued for four days. In addition, the residue of epoxiconazole in rice grains was analyzed after harvest. After harvest, both planted water spinach (Ipomoea aquatica Forsk) and edible amaranth (Amaranthus mangostanüs L.) were analyzed. The results showed that epoxiconazole degraded in the local environment under the experimental conditions described. The degradation equations were in accordance with the first order kinetics. The DT50 of soil, field water and rice plant were 20-69 days, 11-20 days and 14-39 days, respectively. The bioconcentration factors of epoxiconazole on mosquito fish were 12.9 and 10.6 from 2.1 kg ha(-1) and 1.4 kg ha(-1) treatment, respectively. Residues of epoxiconazole in both rice and harvest vegetables were non-detectable. This indicates that epoxiconazole applied to rice at the recommended rates and application frequencies will not accumulate on rice grain and successive cropping vegetables.     

Quick determination of malodor-causing fatty acids in manure by capillary electrophoresis

The analysis of odor components in livestock waste has been extensively studied. Past research has identified volatile fatty acids, especially from C3 to C6, as indicators of malodor. Originally, the odorous components were analyzed by gas chromatography after a tedious absorption and troublesome extraction procedure or by a subjectively olfactory system or sense of smell. Thus, there is a need for the development of highly specific, quantitative analytical methods. In this research, a comprehensive liquid manure analysis approach-capillary electrophoresis (CE) with a systematic optimization procedure-was adopted to measure the concentration of propanoic acid (C2H5COOH, C3), butyric acid (C3H7COOH, C4), valeric acid (C4H9COOH, C5) and caproic acid (C5H11COOH, C6) in swine manure. Liquid samples after filtration were injected into CE directly. The following condition is finally proposed: fused-silica capillary, effective length 40 cm, 50 microm I.D.; buffer, 20 mM Tris and 10 mM p-anisate, pH 8.0; voltage 30 kV; temperature 25 degrees C. The results showed that CE provided a quantitative analysis of volatile fatty acids in liquid manure at the ppm level with minimum sample needed (nanoliter). Moreover, the use of CE is a timesaving technique; one measurement for the separation of those VFAs could be completed within 10 min.     

Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors

Copper adsorption kinetic properties in batch and fixed-bed reactors were studied in this paper. The isothermal adsorption experiments showed that the copper adsorption capacity of a granular activated carbon (Filtrasorb 200) increased when ionic strength was higher. The presence of EDTA diminished the adsorption. An intraparticle diffusion model and a fixed-bed model were successfully used to describe the batch kinetic and fixed-bed operation behaviors. The kinetics became faster when the solution pH was not controlled, implying that the surface precipitation caused some metal uptake. The external mass transfer coefficient, the diffusivity and the dispersion coefficient were obtained from the modeling. It was found that both external mass transfer and dispersion coefficients increased when the flow rate was higher. Finally effects of kinetic parameters on simulation of fixed-bed operation were conducted.     

Removal of BTEX vapor from waste gases by a trickle bed biofilter

The system performance of a trickle bed biofilter for treating single and mixed benzene, toluene, ethylbenzene, and o-xylene (BTEX) vapors from waste gases was investigated under different gas flow rates and influent BTEX concentrations. When a single substrate was fed, removal efficiencies of greater than 90% could be achieved for the loads below 64 g benzene/m3/hr, 110 g toluene/m3/hr, 53 g ethylbenzene/m3/hr, and 55 g o-xylene/m3/hr. When a mixed substrate was fed, removal efficiencies of each compound could be above 90% at BTEX loads below 96 g/m3/hr. The trickle bed biofilter appears to be an effective treatment process for removing both single and mixed BTEX vapors with low to high loads. Under similar substrate loads, BTEX vapors were preferentially biodegraded in the order of toluene, benzene, o-xylene, and ethylbenzene. The volumetric removal rates (elimination capacities) of BTEX vapors for a single-substrate feed were higher than those for a mixed-substrate feed under similar substrate loads; these differences were enhanced at higher substrate loads and less significant for a preferred substrate.     

滇池铜绿微囊藻（Microcystis aeruginosa kutz）对小白鼠肝脏和肝脏微结构毒害的研究

本文研究滇池水体富营养化时，产生“水华”的铜绿微囊藻可使小白鼠肝脏增重及肝脏超微结构发生明显变化，致使小白鼠中毒死亡。     

Characteristics of aerosols collected in central Taiwan during an Asian dust event in spring 2000

Aerosol samples for PM(2.5) and PM(2.5-10) were collected at four locations in central Taiwan from 26 to 31 March 2000, a period that experienced exceedingly high PM levels from 29 to 30 March due to the passage of an Asian dust storm. The samples were analyzed for mass, metallic elements, ions, and carbon. The purpose of this paper is to investigate the influence of the dust storm on the characteristics of local ambient particulate matter. The results indicate that the concentrations of the crustal elements Ca, Mg, Al, Fe and the sea salt species Na+ and Cl- in PM(2.5-10) during the dust episode exceed the mean concentrations in the non-dust period by factors of 3.1, 2.9, 2.6, 2.2, 2.3 and 2.1 respectively. Enrichment factors of Ca, Fe, and Mg in PM(2.5-10) during the dust event are close to unity, indicating that these elements are from soil. Reconstruction of aerosol compositions revealed that soil of coarse particulates elevated approximately 50% in the dust event. It is noted that during the dust event, the ratio of Mg/Al in PM(2.5-10) ranged from 0.21 to 0.25 while that of Ca/Al ranged from 0.6 to 0.9, levels more constant than those obtained in non-dust period.     

Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Manganese uptake and accumulation by the hyperaccumulator plant Phytolacca acinosa Roxb. (Phytolaccaceae)

The perennial herb Phytolacca acinosa Roxb. (Phytolaccaceae), which occurs in Southern China, has been found to be a new manganese hyperaccumulator by means of field surveys on Mn-rich soils and by glasshouse experiments. This species not only has remarkable tolerance to Mn but also has extraordinary uptake and accumulation capacity for this element. The maximum Mn concentration in the leaf dry matter was 19,300 microg/g on Xiangtan Mn tailings wastelands, with a mean of 14,480 microg/g. Under nutrient solution culture conditions, P. acinosa could grow normally with Mn supplied at a concentration of 8000 micromol/l, although with less biomass than in control samples supplied with Mn at 5 micromol/l. Manganese concentration in the shoots increased with increasing external Mn levels, but the total mass of Mn accumulated in the shoots first increased and then decreased. At an Mn concentration of 5000 micromol/l in the culture solution, the Mn accumulation in the shoot dry matter was highest (258 mg/plant). However, the Mn concentration in the leaves reached its highest value (36,380 microg/g) at an Mn supply level of 12,000 micromol/l. These results confirm that P. acinosa is an Mn hyperaccumulator which grows rapidly, has substantial biomass, wide distribution and a broad ecological amplitude. This species provides a new plant resource for exploring the mechanism of Mn hyperaccumulation, and has potential for use in the phytoremediation of Mn-contaminated soils.     

农药污染地下水的微生物治理及含水层渗透性变化研究

采用了从农药厂阿特拉津生产车间排污口污泥中分离出的菌种AT菌 ,进行了农药阿特拉津污染地下水微生物治理的模拟实验研究 ,在实验条件 (T =10℃ ,pH =7.5 )与野外含水层的条件基本一致情况下 ,难于生物降解的污染质阿特拉津的一次投菌降解率可达 3 1.0 8% ;设计了两种有效细菌的投放方式以模拟野外条件下的菌种投加条件。另外 ,AT菌的作用会造成被治理含水层的渗透性能降低 ,两种投菌方式下 ,实验后含水层的渗透系数分别下降 60 .5 4%和 3 4 5 6%。清水冲洗 10d的渗透性恢复率分别为 48.96%及 81.3 6% ,说明清水渗透恢复的方法效果明显     

Wet air oxidation of a reactive dye solution using CoAlPO(4)-5 and CeO(2) catalysts

Wet air oxidation of a prepared reactive dye solution was performed to assess the efficacy of CoAlPO(4)-5 and CeO(2) as catalysts in the reaction. Via adsorption and oxidation of dye, CoAlPO(4)-5 effectively decreased American Dye Manufacturers Institute and chemical oxygen demand (COD) values in the dye solution. At a reaction temperature of 135 degrees C and an applied pressure of 1.0 MPa, color and COD removal were as high as 95% and 90%, respectively, after 2 h. Active sites on the outer surface of CoAlPO(4)-5 are responsible for adsorption and decomposition of dye while active sites in the pores dominate further destruction and oxidation of intermediate products. Since the outer surface only represents a minor part of the total surface, the color removal does not increase appreciably with loading of CoAlPO(4)-5. The CeO(2) catalyst, calcined from cerium chloride under high thermal impact (type A CeO(2)) was very effective in removing color and COD from the solution. This catalyst demonstrated near 100% color removal at temperatures above 135 degrees C and the COD removal could be above 95% at 165 degrees C. With both CoAlPO(4)-5 and CeO(2) catalysts, COD rose and then fell back during the reaction, a feature typical of a consecutive reaction. In contrast to prepared CeO(2), a commercial CeO(2) did not exhibit any catalytic ability for the removal of color and COD. The durability of both CoAlPO(4)-5 and prepared CeO(2) is considered to be fair.