Four kinds of capping materials for controlling phosphorus and nitrogen release from contaminated sediment using a static simulation experiment

• Lanthanum modified bentonite (LMB) can effectively absorb phosphorus (P). • Water treatment plant sludge (WTPS) capping is effective for controlling P release. •Aluminum-based P-inactivation agent (Al-PIA) is an efficient P control material. •The P adsorbed by WTPS and Al-PIA is mainly in the form of NAIP. We determined the effects of quartz sand (QS), water treatment plant sludge (WTPS), aluminum-based P-inactivation agent (Al-PIA), and lanthanum-modified bentonite (LMB) thin-layer capping on controlling phosphorus and nitrogen release from the sediment, using a static simulation experiment. The sediment in the experiment was sampled from Yundang Lagoon (Xiamen, Fujian Province, China), which is a eutrophic waterbody. The total phosphorus (TP), ammonium nitrogen (NH₄⁺-N), and total organic carbon (TOC) levels in the overlying water were measured at regular intervals, and the changes of different P forms in WTPS, Al-PIA, and sediment of each system were analyzed before and after the test. The average TP reduction rates of LMB, Al-PIA, WTPS, and QS were 94.82, 92.14, 86.88, and 10.68%, respectively, when the release strength of sediment TP was 2.26–9.19 mg/(m²·d) and the capping strength of the materials was 2 kg/m². Thin-layer capping of LMB, WTPS, and Al-PIA could effectively control P release from the sediment (P<0.05). However, thin-layer capping of LMB, Al-PIA, and QS did not significantly reduce the release of ammonium N and organic matter (P > 0.05). Based on our results, LMB, Al-PIA, and WTPS thin-layer capping promoted the migration and transformation of easily released P in sediment. The P adsorbed by WTPS and Al-PIA mainly occurred in the form of NAIP.     

Co-pyrolysis of oil sludge with hydrogen-rich plastics in a vertical stirring reactor: Kinetic analysis,emissions, and products

● Collaborative treatment of plastics and OS was established to improve oil quality. ● PE addition successfully improved OS pyrolysis process by deploying H/C_eff ratio. ● Higher H/C_eff ratio promoted cracking to obtain more gas and light oil fractions. ● The degradation of PE and OS was promoted each other under their temperature range. Pyrolysis is an effective method to treat oily sludge (OS) due to its balance between oil recovery and nonhazardous disposal. However, tank bottom OS contains a high content of heavy fractions, which creates obstacles for pyrolysis due to the high activation energy. The incomplete cracking of macromolecules and secondary polymerization decreases the oil quality and causes coking during the operation process. This study introduced polyethylene (PE) into OS to deploy the H/C_eff ratio of feedstocks for pyrolysis. A strong interaction between OS and PE during copyrolysis could be observed from the TG/DTG curves. PE tightly participated in OS degradation, while OS also promoted PE degradation at high temperature. Apparent pits were generated in solid residues from copyrolysis, which was attributed to the uniform and violent gas release. In addition to HCN, other nitrogenous and sulphurous pollutants were inhibited. Accordingly, more gas products were attained after PE addition with more value-added compositions of alkanes and alkenes. Although the oil yield decreased after PE addition, the oil products from copyrolysis possessed higher heating values and higher contents of light fractions with short chains as well as paraffins. Consequently, copyrolysis of OS and PE significantly improved the pyrolysis process and resulted in high oil quality.     

Spatiotemporal variations of dissolved organic matter in a typical multi-source watershed in northern China: a fluorescent evidence

Environmental Science and Pollution Research - The amount of dissolved organic matter (DOM) in a multi-source watershed is important for complete management and assessing the river basin’s...     

Emission inventory and control policy for non-road construction machinery in Tianjin

Environmental Science and Pollution Research - The establishment of a non-road construction machinery emission inventory forms the basis for the analysis of pollutant emission characteristics and...     

Impact of air pollutants on hospital visits for pediatric asthma in Fuzhou city,southeast China

Environmental Science and Pollution Research - Rapid social development in China has resulted in severe air pollution and adverse impacts on people’s health. Although studies have been...     

How can green building development promote carbon emission reduction efficiency of the construction industry?——Based on the dual perspective of industry and space

Environmental Science and Pollution Research - Green building development(GBD) plays an important role in improving carbon emission reduction efficiency of the construction industry(CEEOCI), and...     

Impact of particle sizes on health risks and source-specific health risks for heavy metals in road dust

Environmental Science and Pollution Research - To analyze the impact of particle sizes on sources and related health risks for heavy metals, road dust samples in Beijing were collected and sifted...     

Effects of ambient air pollution on glycosylated hemoglobin: a systematic review and meta-analysis

Environmental Science and Pollution Research - Air pollution is one of the biggest environmental health problems in the world; accumulative studies have shown that air pollution was closely related...     

Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

Environmental Science and Pollution Research - In this work, GAC@Ni/Fe particle electrodes were prepared and employed for the degradation of sulfamethylthiadiazole (SMT) by three-dimensional...     

Influence of different inoculation densities of black soldier fly larvae (Hermetia illucens) on heavy metal immobilization in swine manure

The disposal of organic waste by the biocomposting of black soldier fly larvae (BSFL) has drawn broad attention. However, the discrepancies in heavy metal immobilization between BSFL biocomposting with different inoculation densities and aerobic composting need to be further researched. In this study, BSFL with inoculation densities of 0.08%, 0.24% and 0.40% was added to swine manure to investigate its influence on heavy metal bioaccumulation and bioavailability. The physicochemical properties, BSFL growth performance and amino acid contents were measured. The results showed that the germination index, total prepupal yield and bioavailable fraction removal rate (%) of Cr and Pb at an inoculation density of 0.40% of BSFL were the highest among all of the BSFL biocomposting groups. Although the bioaccumulation factor and heavy metal (Cd, Cr, Cu and Zn) concentrations of the BSFL body from swine manure with inoculation densities of 0.24% and 0.40% of BSFL were similar, the BSFL inoculation density of 0.40% had the best absorption effect on these heavy metals in terms of total prepupal yield. Therefore, this study provides a basis for exploring the optimal inoculation density of BSFL biocomposting to reduce the harmful effects of heavy metals in swine manure.