Surface functional characteristics (C, O, S) of waste tire-derived carbon black before and after steam activation

The effects of steam activation on the surface functional characteristics of waste tire-derived carbon black were investigated. Two carbon-based materials, powdered carbon black (PCB) and PCB-derived powdered activated carbon (PCB-PAC), were selected for this study. A stainless steel tubular oven was used to activate the PCB at an activation temperature of 900 degrees C and 1 atm using steam as an activating reagent. X-ray photoelectron spectroscopy (XPS) was adopted to measure the surface composition and chemical structure of carbon surface. Various elemental spectra (C, O, and S) of each carbon sample were further deconvoluted by peak synthesis. Results showed that the surfaces of PCB and PCB-PAC consisted mainly of C-C and C-O. The PCB-PAC surface had a higher percentage of oxygenated functional groups (C=O and O-C=O) than PCB. The O1s spectra show that the oxygen detected on the PCB surface was mainly bonded to carbon (C-O), whereas the oxygen on the PCB-PAC surface could be bonded to hydrogen (O-H) and carbon (C-O). Sulfur on the surface of PCB consisted of 58.9 wt% zinc sulfide (ZnS) and 41.1 wt% S=C=S, whereas that on the surfaces of PCB-PAC consisted mainly of S=C=S. Furthermore, the increase of oxygen content from 9.6% (PCB) to 11.9% (PCB-PAC) resulted in the increase of the pH values of PCB-PAC after steam activation.     

超声强化Fe0去除阳离子红GTL的研究

采用US/Fe^0系统去除阳离子红GTL,考察了pH值、Fe^0用量、超声功率及活性炭、H2O2、盐分添加对阳离子红GTL去除率的影响,利用紫外-可见吸收光谱变化查明阳离子红GTL在不同条件下的去除差异性,利用SEM解析铁的形态与染料去除的相关性。结果表明：pH≥5.0时超声和Fe^0具有协同效应,Fe^0用量2 g/L,pH=7.0,超声功率135 W,阳离子红GTL去除率达到96.07%;一定量的活性炭、H2O2、盐分添加会加速染料去除,US加速Fe^0反应速度,但不改变染料降解机理,添加活性炭能够彻底降解阳离子红GTL,添加H2O2提供的氧化环境抑制苯胺类化合物生成;铁的形态及与染料的接触是影响染料去除效果的重要原因。     

福建省热带气旋暴雨型地质灾害特征分析

福建是受热带气旋影响较严重的省份,又是一个多山的省份,每年都有因热带气旋暴雨诱发滑坡等地质灾害造成巨大人员伤亡和经济损失的事例发生.通过分析福建省1990～2006年热带气旋暴雨诱发的地质灾害个例,发现热带气旋暴雨型地质灾害的规模和强度均比雨季暴雨诱发的地质灾害大;它的发生与热带气旋路径、过程雨量和当日雨量关系密切,地质灾害主要发生在强降水后的48 h内;热带气旋登陆前后,若有偏东急流、西南季风、冷空气、暖式切变等系统共同作用,对暴雨具有增幅作用,极易引发地质灾害.     

污水灌溉风险概率分布的研究

针对目前我国水资源紧缺、用大量污水进行农田灌溉造成环境污染的现状,指出了污水灌溉风险研究中的不足.利用农业干旱模型,通过非参数检验对污水灌溉风险的概率分布进行了研究,并利用江苏省南京地区某污灌区的实际资料,计算了当地污水灌溉风险的概率分布.     

Well water contaminated by acidic mine water from the Dabaoshan Mine, south China: chemistry and toxicity

An investigation into well water quality was carried out in a rural area subject to irrigation with acidic mine water from the Guangdong Dabaoshan Mine, southern China. The results of water pH measurements from 112 wells in two different seasons suggest that the well water has been contaminated to varying degrees in the investigated Shangba floodplain (approximately 11km south of the Guangdong Dabaoshan Mine). There is a trend that well water pH increased southwards, suggesting that the impacts of acidic irrigation water on groundwater decreased with increasing distance to the entry point of acidic irrigation water. Water quality monitoring results of the selected wells show that Cu and Cd in the water exceeded the limits set in the Chinese National Standards for Drinking Water (GB 5749-85) for the wells close to the irrigation water source. If the World Health Organization (WHO) standard was considered, Cd in some wells was almost 10 times as high as the WHO guideline value (0.003mg l(-1)). Water collected from the location closest to the acidic irrigation water source was acutely toxic to the test organism (Daphnia carinata) even after 51 time dilution. It is likely that the extremely high mortality rate of the local population reported for the study area is at least partly related to the high levels of heavy metals, particularly Cd in the drinking well water.     

Life cycle assessment of fuel selection for power generation in Taiwan

Life cycle assessment (LCA) was applied to performance data from 1997-2002 to evaluate the environmental impacts of the energy input, airborne emission, waterborne emission, and solid waste inventories for Taiwan's electric power plants. Eco-indicator 95 was used to compare the differences among the generation processes and fuel purification. To better understand the environmental trends related to Taiwan's electric power industry, three fuel scenarios were selected for LCA system analysis. Results indicate that there are differences in characteristic environmental impact among the 13 power plants. Scenario simulation provided a basis for minimizing environmental impacts from fuel selection targets. Fuel selection priority should be a gas-fired combined cycle substituted for a coal-fired steam turbine to be more environmentally friendly, particularly in the areas of the greenhouse effect, acidification, winter smog, and solid waste. Furthermore, based purely on economic and environmental criteria, it is recommended that the gas-fired combined cycle be substituted for the oil-fired steam turbine.     

Short-term effects of gaseous pollutants on cause-specific mortality in Wuhan, China

In Asia, limited studies have been published on the association between daily mortality and gaseous pollutants of nitrogen dioxide (NO2), ozone (O3), and sulfur dioxide (SO2). Our previous studies in Wuhan, China, demonstrated long-term air pollution effects. However, no study has been conducted to determine mortality effects of air pollution in this region. This study was to determine the acute mortality effects of the gaseous pollutants in Wuhan, a city with 7.5 million permanent residents during the period from 2000 to 2004. There are approximately 4.5 million residents in Wuhan who live in the city's core area of 201 km2, where air pollution levels are highest, and pollution ranges are wider than the majority of the cities in the published literature. We used the generalized additive model to analyze pollution, mortality, and covariate data. We found consistent NO2 effects on mortality with the strongest effects on the same day. Every 10-microg/m3 increase in NO2 daily concentration on the same day was associated with an increase in nonaccidental (1.43%; 95% confidence interval [CI]: 0.87-1.99%), cardiovascular (1.65%; 95% CI: 0.87-2.45%), stroke (1.49%; 95% CI: 0.56-2.43%), cardiac (1.77%; 95% CI: 0.44-3.12%), respiratory (2.23%; 95% CI: 0.52-3.96%), and cardiopulmonary mortality (1.60%; 95% CI: 0.85-2.35%). These effects were stronger among the elderly than among the young. Formal examination of exposure-response curves suggests no-threshold linear relationships between daily mortality and NO2, where the NO2 concentrations ranged from 19.2 to 127.4 microg/m3. SO2 and O3 were not associated with daily mortality. The exposure-response relationships demonstrated heterogeneity, with some curves showing nonlinear relationships for SO2 and O3. We conclude that there is consistent evidence of acute effects of NO2 on mortality and suggest that a no-threshold linear relationship exists between NO2 and mortality.     

Influences of metals on kinetics of methyl tert-butyl ether biodegradation by Ochrobactrum cytisi

The influence of zinc, manganese, and nickel on the degradation of MTBE (methyl tert-butyl ether), by an aerobic MTBE-degrading strain, Ochrobactrum cytisi, were investigated. The result showed that unlike previous findings, O. cytisi was able to degrade MTBE through direct metabolism when MTBE was present as the only carbon source. The degradation rate of MTBE was rapid, completed within 80 h. MTBE biodegradation by this strain was stimulated at low concentrations of Zn(2+) (1-5 mg l(-1)) and Mn(2+) (1-5 mg l(-1)) but inhibited at high concentrations of Zn(2+) (20 mg l(-1)) and Mn(2+) (20 mg l(-1)), and at low concentration of Ni(2+) (1-4 mg l(-1)). Kinetic parameters for MTBE degradation in the presence or absence of metals were obtained through nonlinear regression and a least-square minimization procedure. In all cases, a good agreement was achieved between kinetic simulations and experimental results.     

Phosphorus Load Reduction Goals for Feitsui Reservoir Watershed, Taiwan

The present paper describes an effort for developing the total maximum daily load (TMDL) for phosphorus and a load reduction strategy for the Feitsui Reservoir in Northern Taiwan. BASINS model was employed to estimate watershed pollutant loads from nonpoint sources (NPS) in the Feitsui Reservoir watershed. The BASINS model was calibrated using field data collected during a 2-year sampling period and then used to compute watershed pollutant loadings into the Feitsui Reservoir. The simulated results indicate that the average annual total phosphorus (TP) loading into the reservoir is 18,910 kg/year, which consists of non-point source loading of 16,003 kg/year, and point source loading of 2,907 kg/year. The Vollenweider mass balance model was used next to determine the degree of eutrophication under current pollutant loading and the load reduction needed to keep the reservoir from being eutrophic. It was estimated that Feitsui Reservoir can becoming of the oligotrophic state if the average annual TP loading is reduced by 37% or more. The results provide the basis on which an integrated control action plan for both point and nonpoint sources of pollution in the watershed can be developed.     

Monitoring and Assessment of Persistent Organochlorine Residues in Sediments from the Daliaohe River Watershed, Northeast of China

Surface sediment samples from 12 sites of the three selected rivers in Daliaohe River watershed (Hunhe River, Taizihe River and Daliaohe River) were analyzed with the objective of establishing sources and hazard of the organochlorinae pesticides (OCPs) and polychlorinated biphenyl (PCBs) in surface sediments. The total concentrations of OCPs varied from 3.06 to 23.24 ng g⁻¹. ∑HCH (α-HCH, β-HCH, δ-HCH, γ-HCH), ∑DDT (p, p′-DDE, p, p′-DDD, o, p′-DDT, p, p′-DDT) and ∑Cyclodiene (Heptachlor, Aldrin, Heptachlor epoxide, Dieldrin, Endrin) ranged from 1.86 to 21.48, 0.5 to 2.81 and 0.56 to 1.53 ng g⁻¹, respectively. Results of OCPs also illustrate that the most dominant pollutants among the OCPs was ∑HCH, and γ-HCH was the most dominant isomer in HCH, which was evidence of recent input of lindane. It possibly came from the runoff of polluted soils and long-scale transportation. Total PCB concentrations ranged between 1.88 and 16.88 ng g⁻¹. The peak concentrations of PCBs were found in sediments from station T5 and D3, which are in the vicinity of industrial areas and ferry, respectively. These data show a moderate level of OCPs and PCBs contaminations compared to that in other countries.