常张高速公路岩石边坡仿原生态植被恢复技术的应用研究

介绍了常张高速公路岩石边坡仿原生态植被恢复技术的施工工艺、新型的生态防护技术与传统的边坡防护相比较,具有投资省、见效快,且能稳定表层边坡,综合造价仅为客土喷播植草的50%～60%,能在短期内使边坡整体环境景观效果与周边协调一致,尤其适宜于对客土喷播植草难以成活的极陡边坡(坡率大于1∶0.75)的生态防护,探索出了一条适合我省实际情况的且成本低、效果好的新的生态防护模式.仿原生态植被恢复技术是常张高速公路生态防护措施的典型代表,对今后我省山区高速公路生态防护建设具有一定的指导意义.     

近十年水中硫化物测定方法的进展

评述了１９８５～１９９６年间报道的水中硫化物方法概况，内容包括：水样的预处理方法，水样测定的分光光度法，电化学法，原子吸收光谱以及其他分析方法等。     

乌贼墨黑色素对Pb2+-Cu2+二元体系的吸附性能研究

为探索新型生物吸附剂，以乌贼墨黑色素（SIM）为吸附剂，研究Pb²⁺、Cu²⁺单组分溶液及Pb²⁺-Cu²⁺二元混合体系中SIM对Pb²⁺和Cu²⁺的吸附效果并构建等温吸附模型.结果表明，pH值、SIM添加量、吸附时间对SIM吸附Pb²⁺和Cu²⁺的吸附量影响较大，而吸附温度对吸附效果影响较小；单组分吸附与二元混合体系吸附对比表明，二元混合体系中Pb²⁺和Cu²⁺存在竞争吸附.应用L （Langmuir）和F （Freundlich）等温吸附模型拟合了SIM对Pb²⁺、Cu²⁺单组分金属离子的吸附过程，其中L模型与试验结果拟合度更高；应用Non-modified Langmuir、Modified Langmuir isotherm、Extended Langmuir、Extended Freundlich和SRS模型5种模型对Pb²⁺-Cu²⁺二元混合体系的等温吸附过程进行拟合，其中Extended Langmuir模型与试验结果拟合度最佳.应用红外光谱（FTIR）分析SIM吸附金属离子的原理时发现，SIM上羟基、-NH和不饱和键是金属离子的吸附位点，且SIM对Pb²⁺的吸附能力优于对Cu²⁺的吸附.     

非均相催化湿式氧化法活性炭再生

使用浸渍法制备的CuO Al2 O3催化剂对吸附苯酚饱和的活性炭进行非均相催化湿式氧化再生研究 ,考察了反应温度、反应时间、催化剂投加量、反应氧分压、投炭量、蒸馏水量对非均相催化湿式氧化再生活性炭的影响结果 ,同时在该实验中得到非均相CuO Al2 O3催化湿式氧化再生活性炭的最佳条件。对催化剂进行了X衍射分析 ,并通过对催化剂的稳定性进行实验 ,得出该催化剂在进行催化湿式氧化再生活性炭的过程中具有较好的稳定性     

氟苯胺好氧生物降解性能的研究

利用驯化污泥研究了邻氟苯胺、对氟苯胺、2,4-二氟苯胺的好氧生物降解性能.结果表明,3种氟苯胺的好氧生物降解性能从高到低依次为对氟苯胺、邻氟苯胺和2,4-二氟苯胺.降解动力学分析表明,除2,4-二氟苯胺在实验质量浓度8.56 mg/L时为一级反应,其他为零级反应;且它们的降解规律都符合Monod方程;30 ℃、振荡速率140 r/min为氟苯胺的最佳降解条件.同时研究了共基质条件下葡萄糖和苯胺对2,4-二氟苯胺的好氧降解的影响,葡萄糖的引入有促进作用,而苯胺只在一定浓度范围内有促进作用.氟苯胺的生产废水与生活污水合并处理以及多种组分混合废水处理是可行的.     

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.     

双氧水强化微电解法处理硝基苯废水的试验研究

以某化工厂的硝基苯生产废水为研究对象,在小试确定试验条件的基础上,采用双氧水强化微电解法对废水进行处理,探讨双氧水强化微电解法对废水处理的原理及处理工艺条件.实验结果表明：双氧水强化微电解法处理难降解有机废水,效果好,可以提高废水的生化性,为废水的后续处理提供了有利条件,是难生化有机废水处理的有效方法之一.     

Biohydrogen production in continuous-flow reactor using mixed microbial culture.

The goal of the proposed project was to develop an anaerobic fermentation process that converts negative-value organic wastes into hydrogen-rich gas in a continuous-flow reactor under different operating conditions, such as hydraulic retention time (HRT), heat treatment, pH, and substrates. A series of batch tests were also conducted in parallel to the continuous study to evaluate the hydrogen conversion efficiency of two different organic substrates, namely sucrose and starch. A heat shock (at 90 degrees C for 15 minutes) was applied to the sludge in an external heating chamber known as a sludge activation chamber, as a method to impose a selection pressure to eliminate non-spore-forming, hydrogen-consuming bacteria and to activate spore germination. The experimental results showed that the heat activation of biomass enhanced hydrogen production by selecting for hydrogen-producing, spore-forming bacteria. The batch feeding at a shorter HRT of 20 hours (or higher organic loading rate) favored hydrogen production, whereas, at a longer HRT of 30 hours, methane was detected in the gas phase. The major organic acids of hydrogen fermentation were acetate, butyrate, and propionate. Up to 23.1% of influent chemical oxygen demand was consumed in biomass synthesis. Batch tests showed that the hydrogen-production potential of starch was lower than sucrose, and better conversion efficiency from starch was obtained at a lower pH of 4.5. However, addition of sucrose to starch improved the overall hydrogen-production potential and hydrogen-production rate. This study showed that sustainable biohydrogen production from carbohydrate-rich substrates is possible through heat activation of settled sludge.     

磷钨酸光催化降解甲基橙溶液的研究

以磷钨酸为光催化剂,在紫外灯照射下,对模拟染料废水甲基橙溶液进行光催化降解,并研究了催化剂加入量、pH值、甲基橙初始浓度和外加氧化剂H2O2对光催化降解效果的影响.结果表明,磷钨酸光催化剂加入量为300 mg/100 mL,pH=2.5时,甲基橙溶液的降解率明显高于其他pH值的降解率;在较低浓度下,甲基橙溶液的光催化降解反应符合一级动力学方程;外加氧化剂H2O2可提高光催化反应速率.     

连续流分段进水生物脱氮工艺控制要点及优化

主要介绍了分段进水生物脱氮工艺的系统工作原理及工艺特性,并探讨了该工艺运行操作和设计的几个重要影响因素,如进水流量分配比、溶解氧、污泥回流比、C/N比等,并在此基础上讨论了分段进水生物脱氮工艺的优化控制对策.