污泥活性炭强化SBR法处理垃圾渗滤液的实验研究

为了进一步处理垃圾渗滤液,试验采用污泥活性炭强化序批式间歇反应器（SBR）法进行处理,通过对比普通SBR法试验,得出投加污泥活性炭强化SBR法处理垃圾渗滤液的效果要远远高于普通SBR法。当污泥活性炭的投加量为1.2 g/L,容积负荷为0.5～1.5 kg BOD₅/(m³·d)时,进水1 h,曝气10 h,沉淀1.5 h,闲置1.5 h,处理效果最好,COD的去除率达到了85%,NH³-N的去除率达到了90%。     

Adsorption of phenol and its derivatives from water using synthetic resins and low-cost natural adsorbents: a review

In this article, the technical feasibility of the use of activated carbon, synthetic resins, and various low-cost natural adsorbents for the removal of phenol and its derivatives from contaminated water has been reviewed. Instead of using commercial activated carbon and synthetic resins, researchers have worked on inexpensive materials such as coal fly ash, sludge, biomass, zeolites, and other adsorbents, which have high adsorption capacity and are locally available. The comparison of their removal performance with that of activated carbon and synthetic resins is presented in this study. From our survey of about 100 papers, low-cost adsorbents have demonstrated outstanding removal capabilities for phenol and its derivatives compared to activated carbons. Adsorbents that stand out for high adsorption capacities are coal-reject, residual coal treated with H3PO4, dried activated sludge, red mud, and cetyltrimethylammonium bromide-modified montmorillonite. Of these synthetic resins, HiSiv 1000 and IRA-420 display high adsorption capacity of phenol and XAD-4 has good adsorption capability for 2-nitrophenol. These polymeric adsorbents are suitable for industrial effluents containing phenol and its derivatives as mentioned previously. It should be noted that the adsorption capacities of the adsorbents presented here vary significantly depending on the characteristics of the individual adsorbent, the extent of chemical modifications, and the concentrations of solutes.     

镰刀菌HJ01对对氯苯酚的降解特性

采用实验室分离的一株镰刀菌HJ01,以对氯苯酚(4-CP)为降解底物,以蔗糖为外加碳源,考察了蔗糖质量浓度、降解温度、初始pH对4-CP降解效果的影响,初步探讨了镰刀菌HJ01对4-CP的降解动力学和降解机理.实验结果表明:该菌株能以4-CP为惟一碳源和能源生长;在外加蔗糖为碳源,蔗糖质量浓度为3 g/L、降解温度为30℃、初始pH为8的条件下,50 mg/L4-CP能在6 d内被完全降解.以4-CP为惟一碳源和外加蔗糖下的降解动力学分别符合Haldane模型和一级动力学方程.     

固态排渣煤粉炉NOx产生浓度影响因素偏相关分析

利用第一次全国污染源普查“火力发电行业产排污系数核算”工作中现场监测得到的数据,首次采用偏相关分析的方法,对固态排渣煤粉炉中机组规模、空气过剩系数、煤中挥发分和发电负荷率等因素对NOx产生浓度的影响进行定性分析,结论：NOx产生浓度与前三种因素存在显著的相关。而与发电负荷率的关系受锅炉是否采用低氮燃烧技术的影响。空气过剩系数越大,煤的挥发分越高,NOx产生浓度越低;采用低氮燃烧装置的锅炉中,机组规模越大,产生的NOx越少,且对于同一锅炉来说,NOx产生浓度随着发电负荷率的升高而增大;未采用燃烧控制的锅炉中,机组规模越大,NOx产生浓度越高,且与发电负荷率不相关。根据分析结果,提出了控制燃煤电厂固态排渣煤粉炉NOx排放的优化措施和建议。     

Effects of time-gap settings of adaptive cruise control (ACC) on driving performance and subjective acceptance in a bus driving simulator

A study was conducted to investigate the effects of time-gap settings and contents of secondary tasks on a fix-based bus driving simulator on drivers’ performance while reclaiming control from ACC in a car-following scenario of emergency brake by the lead vehicle. Thirty professional bus drivers drove on the simulator with the scenario of highway traffic flow under 12 random time-gap settings: from 0.64 s to 2.40 s with the interval of 0.16 s. As for the effects of secondary tasks, subjects were evenly divided into three conditions: no secondary task interference, simple secondary task, and complex task. The results demonstrated that different safety demarcations of time-gaps on subjective acceptance and driving performance can be found out. The integrated demarcations separated time-gaps into divisions that represented different levels of danger. It revealed that the safer time-gaps for different situations were: longer than 1.60 s for none-secondary task distraction and longer than 2.08 s for being continuously distracted by secondary tasks. The demand for simple tasks is relatively high, so a larger time-gap is needed for the driver to remain safe. This research has implications for the time-gap selection of ACC and effects of secondary task distraction on buses. A next logical step will focus on determining time-gaps for lead vehicles on curves or slopes, when multiple vehicles are present ahead, and modeling driver behavior and performance with ACC for cars, buses, and other types of vehicles.     

应用AHP进行气体灭火系统的优选

在研究了CO2、FM-200(七氟丙烷)、烟烙尽(INERGEN)及气溶胶等气体灭火技术特点的基础上,通过对这4种灭火剂的灭火效率、安全性、环保性和经济性4项性能指标进行AHP综合分析,分析结果表明,气溶胶灭火系统是现阶段最具优势的哈龙替代物.     

搞好煤矿安全生产工作的建议

煤矿作为高危行业,安全始终是天字号的头等大事。从全国范围内发生的重特大事故来看,也主要集中在煤炭领域。泰安市是煤炭主要产区,因此,抓好煤矿安全生产工作,不仅能有效遏制和减少重特大安全事故的发生,也充分体现了代表最广大人民群众的根本利益,执政为民的具体要求。     

水体中高锰酸盐指数的流动注射分析方法

研究了用流动注射分析技术测定水体中高锰酸盐指数。使用新发明的耐腐蚀恒流泵、低记忆高效混合器、不存留气泡流通池等部件,通过高温高压,缩短消解时间,从而建立了一种可用于无人值守的自动在线快速监测水体中高锰酸盐指数的分析方法。     

兰州市空气污染对儿童肺功能影响的前瞻性研究

从不同的角度阐述了室内外空气污染对儿童肺功能 ,特别是小气道功能的影响及其影响程度的前瞻性研究结果。并通过多因素、多指标的综合分析 ,揭示了一些影响儿童肺功能的主要因素。指出了从保护人体健康的角度来说 ,好的环境空气质量和良好的室内空气质量同样重要     

Status and habitat preferences for endemic inhabitants of fiddler crab Uca formosensis in Hsiang-Shan wetland, Taiwan

This article reports on soil samples collected from Hsiang-Shan wetland, Taiwan. Canonical discriminant analysis (CDA) was applied to identify an existing habitat type's scheme by identifying the physico-chemical properties of sediment in Hsiang-Shan wetland. The three constructed discriminant functions (CDFs) showed a marked contribution by most of the discriminant variables, and the recognition capacities in these three CDFs were 49.5, 32.8 and 17.7%. Our study revealed that the most important latent factors in Hsiang-Shan wetland are soil texture-caused factor, ocean current-caused factor, nutrient-caused factor, and the redox reaction-caused factor. And the most sensitivity parameters in this habitat followed the descending order: OBD, EC, Eh, sand, TN, porosity, STP, silt, VCP and pH. And the inhabited sediment properties for U. formosensis in terms of soil texture are sand, silt, and clay (34.05, 29.72, and 32.35%, respectively): that is clay loam soil. We also found that U. formosensis preferred to inhabit the upper intertidal zone, spending 8.41% of the time submerged. Vegetation coverage on the ground was less than 2.20%, showing that it preferred to live in a bare intertidal habitat. Concerning nest choosing, excavating burrows is more difficult when a high soil penetration force is required, and in this study the soil penetration force for 20 cm was found to be is 45.98 N/cm(2). The results will be helpful in developing a methodology for use by the government in refining its management programs.