内蒙古自治区能源概况及各种能源产消情况分析

通过对内蒙古自治区能源概况进行调查,分析内蒙古近几年各种能源的产消情况,这对于内蒙古如何优化能源结构的调整、促进内蒙古的可持续发展有着十分重要的意义。     

一种有机硅改性丙烯酸防污涂料的研究

目的通过在丙烯酸树脂分子中引入有机硅,制备一种具有低表面能的有机硅改性丙烯酸树脂CP-CC021。方法探讨合成工艺中有机硅单体和引发剂含量以及添加纳米级Si O2粒子填料对涂层性能的影响规律。结果获得了最大接触角的最佳工艺条件,添加纳米Si O2粒子增大了涂层的表面粗糙度,在涂层表面形成了大量微-纳结构状的突起,显著提高涂层的疏水性能。结论有机硅单体(VTMS)质量分数为23.0%,引发剂(AIBN)质量分数为0.50%,纳米Si O2粒子添加量(质量分数)为7.4%,得到的涂层接触角为126.1°。     

Synthesis and kinetics investigation of meso-microporous Cu-SAPO-34 catalysts for the selective catalytic reduction of NO with ammonia

A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH_3-SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns(XRD), Scanning electron microscopy(SEM), Transmission electron microscopy(TEM), N_2 sorption-desorption, nuclear magnetic resonance(NMR), Inductively Coupled Plasma-Atomic Emission spectrometer(ICP-AES), X-ray absorption spectroscopy(XPS),Temperature-programmed desorption of ammonia(NH_3-TPD), Ultraviolet visible diffuse reflectance spectroscopy(UV-Vis DRS) and Temperature programmed reduction(TPR).The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion( 90%) among the wide activity temperature window in the range of 150–425℃.     

5种沉水植物对重金属富集能力的对比研究

为了探求不同的沉水植物对水体中重金属吸收富集能力的差异,采用原子吸收光谱法,对淮河支流东风渠水体及水体中常见的5种沉水植物:菹草、黑藻、龙须眼子菜、穗花狐尾藻及小茨藻进行了铅(Pb)、镉(Cd)、锌(Zn)、铜(Cu)含量分析。结果表明:5种沉水植物样品中重金属含量远远高于水体重金属背景值,对重金属Cu、Pb、Cd、Zn的富集系数为58~1 515,对Zn富集最强,最大富集量达到242.42 mg/kg,富集系数为1 515。不同的沉水植物对重金属的吸收富集优势存在明显差异,利用沉水植物来修复水体重金属污染时,须依据不同的污染元素来选择合适的沉水植物。     

模拟状态下高尔夫球场果岭区域土壤氮磷浸出物对铁岗水库水质影响研究

通过采集高尔夫球场即将淹没的果岭土壤进行实验室条件下的模拟库基样品试验,对水库扩容后蓄水初期水质的变化情况进行了研究.结果表明:库水所含主要成分pH、高锰酸钾盐指数、总氮、总磷、氨氮和硝酸盐氮分别为7.4(mg/L)、30.8(mg/L)、1.16(mg/L)、1.189(mg/L)、0.21(mg/L)和0.11(mg/L);果岭20 cm土层库基土样pH、有机质、硝酸盐氮、氨态氮和有效磷分别为6.41(mg/kg)、10.29(mg/kg)、25.48(mg/kg)、25.76(mg/kg)和140.77(mg/kg).现有库基成分会改变库水高锰酸钾盐指标的升高.库水本身的总磷和总氮含量就严重超标.果岭库基本身的磷氮含量也很高.浸泡后果岭库基土样对降低浸出物总磷的严重超标起到了对冲的作用,致使总磷含量大为降低.     

Research on the evolvement of morphology of coking coal during the coking process

The evolvement of morphology and structure of the coal with different metamorphic degrees during coking process in the vertical furnace was investigated by infrared Image detector. Moreover, the temperature distribution in the radial direction and the crack formation were also studied in heating process. The results show that the amount of crack and the shrinkage level of char decrease with the coal rank rising. In addition, the initial temperature of crack formation for char increases with the coal rank rising.     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.     

An unusual high ozone event over the North and Northeast China during the record-breaking summer in 2018

Under the background of global warming, the summer temperature of the North and Northeast China (NNEC) has significantly increased since 2017, which was accompanied by the aggravated ozone (O₃) pollution. In 2018, the NNEC experienced a record-breaking summer of the past 40 years. Influenced by the abnormal high temperatures, a regional ozone event occurred on 2-3 August, over 63% of 79 selected cities in the NNEC were exposed to O₃ pollution, and the maximum value of MDA8 O₃ reached 268 μg/m³. Observations indicated that ozone concentrations agree well with the maximum temperature at 2 meters (MT2M) over NNEC with a correlation coefficient of 0.69. During the pollution episode, strong downdraft in the local high (35°N-42.5°N, 112.5°E-132.5°E; LH) over the NNEC created the favourable meteorological conditions for O₃ formation. By analyzing the horizontal wind and wave activity fluxes (WAFs) at 200 hPa, we found that the LH formation was resulted from the Rossby wave propagation from upstream along the mid-latitude Asian jet. The split polar vortex intrusion further strengthened the amplitude of the Rossby wave and reinforced the LH. Moreover, a secondary circulation between Typhoon Jongdari and the LH contributed to the enhanced LH with strong subsidence. On the other hand, the stratospheric intrusions under the deep subsidence also contributed to the enhanced surface O₃. In this study, the deep-seated meteorological dynamical mechanisms contributing to the abnormal high temperatures were investigated, which can lead to a better understanding of the regional O₃ pollution over NNEC under the global-warming background.     

地质雷达在监测地下水石油烃污染中的应用

随着我国工业迅速发展,石油烃污染威胁地下水安全问题逐渐暴露出来。地质雷达作为一种非破坏性的原位探测技术在国外已广泛应用于地下水监测,由于石油烃在地质雷达图谱上通常显示出高阻异常特征,这为探测地下水中的石油烃污染提供了可能。简述了地质雷达探测石油烃的原理,探测效果的影响因素,并列举了部分国外实例,证实了地质雷达探测地下水石油烃污染的可行性。     

明胶厂剩余高钙污泥作为燃煤固硫剂的应用研究

明胶生产产业在废水处理工艺中产生大量剩余高钙污泥,采用该剩余污泥作为燃煤固硫剂,在高温管式电阻炉内进行燃烧实验,通过测定燃烧前和燃烧后样品中的硫含量确定该剩余污泥的固硫效果。通过单因素研究煤粉粒径、剩余污泥粒径和剩余污泥/煤样%等影响因素对固硫率的影响。在单因素试验的基础上通过正交设计法优选达到较高固硫率的实验条件。实验结果表明:影响固硫率的因素从大到小依次为燃烧温度>剩余污泥/煤样%>煤粉粒径>剩余污泥粒径。以剩余污泥作为固硫剂,固硫率最高的实验条件为:燃烧温度800℃,剩余污泥/煤样为3%,煤粉粒径60⁹0目,剩余污泥粒径9090目,剩余污泥粒径90¹20目。并且,当温度达到1150℃,煤粉粒径90120目。并且,当温度达到1150℃,煤粉粒径90¹20目,剩余污泥粒径为60120目,剩余污泥粒径为60⁹0目,污泥/煤样(质量比)为3%时,固硫率可达62.78%,说明在高温下该剩余污泥保持较高的固硫率。将明胶厂剩余污泥作为固硫剂是较为合适的再利用方法,可有效缓解当前该污泥大量堆积污染环境的状况。