高气泡表面积通量浮选柱气浮除藻的研究

湖泊、水库等水源的富营养化,使藻类去除成为饮用水生产的重要任务.本研究采用高气泡表面积通量浮选柱气浮除藻,考察了混凝剂、气泡表面积通量和浮选柱高度等因素的影响.试验表明,高气泡表面积通量浮选柱气浮可高效地去除绿藻、硅藻和蓝藻,叶绿素a和藻类去除率达95%以上,比传统浮选柱气浮和沉降作业有较大幅度提高.与普通气浮柱比较,高气泡表面积通量浮选柱增加了气泡与藻的碰撞几率,防止因大表观充气速率造成的紊流和扰动,使气泡/藻结合体有相对静态的浮升环境,避免了气泡/藻结合体在浮升过程中的脱落,实现对藻类的迅速捕集和转移.     

三层复合铝合金板材的复合工艺和结合机制

研究了Al-Si/Al-Mn/Al-Si三层复合板热轧复合工艺,借助金相显微镜、扫描电镜、能谱仪分析了复合工艺参数对轧后结合强度和剥离面形貌的影响,得到了优化热轧复合工艺,并对热轧复合板界面结合机制进行了探讨.     

紫外光照射与生物降解耦合用于PCBs降解的研究

介绍了PCBs紫外光降解的机理及研究进展 ,讨论了影响PCBs光降解的主要因素 ,即环上的氯原子数目、取代位置及所处的微环境均显著地影响PCBs的光降解速率。简述了PCBs生物降解的研究进展 ,重点概述了好氧降解、厌氧降解及好氧厌氧协同作用的机理及特点。最后 ,讨论了PCBs生物降解和光降解的互补性 ,介绍了最近的研究进展 ,指出光降解和生物降解耦合将加快PCBs的移走速率 ,提出了PCBs污染土壤原位修复需要进一步解决的问题。     

Effects of different sludge disintegration methods on sludge moisture distribution and dewatering performance

A key step in sludge treatment is sludge dewatering. However, activated sludge is generally very difficult to be dewatered. Sludge dewatering performance is largely affected by the sludge moisture distribution. Sludge disintegration can destroy the sludge structure and cell wall, so as change the sludge floc structure and moisture distribution, thus affecting the dewatering performance of sludge. In this article, the disintegration methods were ultrasound treatment, K₂FeO₄ oxidation and KMnO₄ oxidation. The degree of disintegration (DD_COD), sludge moisture distribution and the final water content of sludge cake after centrifuging were measured. Results showed that three disintegration methods were all effective, and K₂FeO₄ oxidation was more efficient than KMnO₄ oxidation. The content of free water increased obviously with K₂FeO₄ and KMnO₄ oxidations, while it decreased with ultrasound treatment. The changes of free water and interstitial water were in the opposite trend. The content of bounding water decreased with K₂FeO₄ oxidation, and increased slightly with KMnO₄ oxidation, while it increased obviously with ultrasound treatment. The water content of sludge cake after centrifuging decreased with K₂FeO₄ oxidation, and did not changed with KMnO₄ oxidation, but increased obviously with ultrasound treatment. In summary, ultrasound treatment deteriorated the sludge dewaterability, while K₂FeO₄ and KMnO₄ oxidation improved the sludge dewaterability.     

ClO2溶胞对SBR处理系统污泥减量研究

通过烧杯溶胞实验,考察了ClO2处理SBR剩余污泥上清液△SCOD随处理时间的变化,以确定ClO2溶胞最佳方式;在SBR中试系统,把系统排出剩余污泥的50%经ClO2处理后回流至处理系统,运行50 d,考察处理系统的污泥减量效果及其对系统污水处理效果的影响.结果表明,ClO2具有良好的溶胞作用,在最佳投量为8 mg C...     

高声能密度超声波破碎污泥细胞效能的研究

采用超声波在较高声能密度下处理SBR的剩余污泥,主要考察了含固率、声能密度和作用时间对污泥细胞破碎效果的影响。结果表明,在声能密度0.5～3 W/mL内,含固率1%～1.5%的剩余污泥经超声波作用后,上清液SCOD随作用时间呈线性升高;在声能密度1～3 W/mL内,含固率0.25%～0.5%的剩余污泥经超声波作用后,上清液SCOD随作用时间呈平缓缓慢升高。高声能密度超声波更适合对较高含固率污泥的细胞破碎;此情况下,上清液SCOD增幅、NH4＋-N、TN及TP升幅均与声能密度正相关。经超声波作用6 min后,污泥形态结构已破坏。     

Patterns and dietary intake of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in food products in China

The health risk of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like PCBs (dl-PCBs) to human being should be assessed regularly. To evaluate the contamination levels in various food products in the Chinese market and to assess the dietary exposure of the Chinese population, 11 varieties of food groups totaling 634 samples including beef and mutton, chicken and duck, pork, fish and seafood, milk and dairy products were evaluated. The average concentrations of PCDD/Fs in all groups ranged from 0.291 to 8.468 pg/g whole weight (w.w.). The average toxic equivalency concentrations were from 0.012 pg TEQ/g w.w. for cereal to 0.367 pg TEQ/g fat for marine oil. OCDD and 2,3,7,8-TCDF were the dominant congeners in foodstuffs. The dietary estimated mean intake for the Chinese rural and urban populations were 0.656 and 0.514 pg TEQ/kg body weight/day, respectively, however, the cereal group exposure were higher to the estimate daily intake and contributed 81% for rural and 48% for urban population, followed by fish and seafood which contributed 4% and 16% to the estimate daily intake. The estimated dietary intakes were compared with the toxicological reference values and showed that both rural and urban populations were well below those values.     

基于实际飞行数据的首都机场飞机发动机日排放清单估算方法研究

根据航班实际飞行数据估算机场飞机主发动机排放量,可以提升机场排放清单编制的准确度.基于北京首都机场某日运行数据和国内1326架次航班的机载飞行数据(QAR数据),研究了基于飞行数据的机场飞机主发动机排放清单制定方法.采用一阶近似3.0(FOA3.0)方法补充国际民航组织发动机排放数据库颗粒物基准排放指数,结合QAR数据,应用波音燃油流量法2(BFFM2)估算了实际飞行条件下污染物排放指数,编制了首都机场该日飞机主发动机排放清单,分析了首都机场航班排放特征.在此基础上,探讨了结合实际数据本地化的着陆和起飞循环,以期为机场飞机主发动机排放量的快速准确核算提供新的思路.结果发现,该日航班主发动机HC、CO、NO_x和PM_(2.5)排放量分别为933.9、10967.8、14703.5和85.5 kg,较标准LTO循环估算结果的偏差分别为15.6%、13.2%、-29.1%和-18.9%.NO_x排放主要集中在起飞和爬升阶段,占其排放总量的68.0%;HC和CO排放主要集中在滑行和慢车阶段,分别占其排放总量的90.0%和88.0%;PM_(2.5)在各飞行阶段的排放较为平均.对于单位LTO循环,航班滑行过程中平均排队等候(地速为零)时间为7.7 min,产生的HC、CO、NO_x和PM_(2.5)分别占总滑行阶段对应污染物排放量的26.3%、27.5%、25.7%和27.5%,这一部分排放量有望通过场面运行优化进一步控制.     

磷酸活化活性炭对Cu~（2＋）的吸附特征研究

寻求廉价而高效的吸附材料为目的,研究向日葵秸杆基活性炭对铜离子的吸附性能。以向日葵秸秆为原料,经H3PO4活化制备活性炭,通过静态实验研究了其对水溶液中Cu2＋的吸附特性,考察了溶液pH值、吸附温度和离子强度对吸附的影响,探讨了吸附热力学、动力学和吸附机理。结果表明：溶液pH值为5～6时活性炭对Cu2＋的去除效果最好;向50 mL 170 mg·L-1的溶液中加入0.5 g活性炭,温度为45℃、吸附时间为1 h时,对Cu2＋的去除率可达98.3%;Langmuir方程能更好地描述Cu2＋在活性炭上的等温吸附特征,静态吸附容量可达41.03 mg·g-1;吸附过程符合拟二级动力学过程,且为吸热的化学吸附过程,膜扩散为速率控制步骤,离子交换可能在吸附过程中起了重要作用。