The regulation of a spatially heterogeneous externality: Tradable groundwater permits to protect streams

Groundwater pumping can reduce the flow of surface water in nearby streams. In the United States, recent awareness of this externality has led to intra- and inter-state conflict and rapidly-changing water management policies and institutions. Although the marginal damage of groundwater use on stream flows depends crucially on the location of pumping relative to streams, current regulations are generally uniform over space. We use a population data set of irrigation wells in the Nebraska portion of the Republican River Basin to analyze whether adopting spatially differentiated groundwater pumping regulations leads to significant reductions in farmer abatement costs and costs from damage to streams. We find that regulators can generate most of the potential savings in total social costs without accounting for spatial heterogeneity. However, if regulators need to increase the protection of streams significantly from current levels, spatially differentiated policies will yield sizable cost savings.     

Integral approach to industrial effluent quality control in favour of preventing the Rijeka bay pollution

Abstract

INA‐Petrochemical Industry Omi?alj, Yugoslavia is currently producing low density polyethylene, vinyl chloride monomer and ethylene dichloride.

Because of a potentially great hazard for environmental pollution, particularly by low molecular weight chlorinated hydrocarbons, the company has been putting significant effort into its anti‐pollution programme.

Modern technology, polyfunctional organization and proper control of all waste materials has enabled, thus far, no evident or noticable impact on the environment.

Wastewater treatment from the source to final discharged effluent and environmental control results are described.     

Natural attenuation of petroleum hydrocarbons—a study of biodegradation effects in groundwater (Vitanovac,Serbia)

The role of natural attenuation processes in groundwater contamination by petroleum hydrocarbons is of intense scientific and practical interest. This study provides insight into the biodegradation effects in groundwater at a site contaminated by kerosene (jet fuel) in 1993 (Vitanovac, Serbia). Total petroleum hydrocarbons (TPH), hydrochemical indicators (O₂, NO₃^?, Mn, Fe, SO₄^2?, HCO₃^?), δ¹³C of dissolved inorganic carbon (DIC), and other parameters were measured to demonstrate biodegradation effects in groundwater at the contaminated site. Due to different biodegradation mechanisms, the zone of the lowest concentrations of electron acceptors and the zone of the highest concentrations of metabolic products of biodegradation overlap. Based on the analysis of redox-sensitive compounds in groundwater samples, redox processes ranged from strictly anoxic (methanogenesis) to oxic (oxygen reduction) within a short distance. The dependence of groundwater redox conditions on the distance from the source of contamination was observed. δ¹³C values of DIC ranged from ??15.83 to ??2.75‰, and the most positive values correspond to the zone under anaerobic and methanogenic conditions. Overall, results obtained provide clear evidence on the effects of natural attenuation processes—the activity of biodegradation mechanisms in field conditions.     

Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

Metal concentrations in the soils and native plants surrounding the old flotation tailings pond of the copper mining and smelting complex Bor (Serbia)

In this study concentrations of metals in the native plants and soils surrounding the old flotation tailings pond of the copper mine were determined. It has been established that the soil is heavily contaminated with copper, iron and arsenic, the mean concentrations being 1585.6, 29,462.5 and 171.7 mg kg(-1) respectively. All the plants, except manganese, accumulated metallic elements in concentrations which were either in the range of critical and phytotoxic values (Pb and As) or higher (Zn), and even much higher (Cu and Fe) than these values. Otherwise, the accumulation of Mn, Pb and As was considerably lower than that of Cu, Fe and Zn. In most plants the accumulation of target metals was highest in the root. Several plant species showed high bioaccumulation and translocation factor values, which classify them into species for potential use in phytoextraction. The BCF and TF values determined in Prunus persica were 1.20 and 3.95 for Cu, 1.5 and 6.0 for Zn and 1.96 and 5.44 for Pb. In Saponaria officinalis these values were 2.53 and 1.27 for Zn, and in Juglans regia L. they were 8.76 and 17.75 for Zn. The translocation factor in most plants, for most metals, was higher than one, whereas the highest value was determined in Populus nigra for Zn, amounting to 17.8. Among several tolerant species, the most suitable ones for phytostabilization proved to be Robinia pseudoacacia L. for Zn and Verbascum phlomoides L., Saponaria officinalis and Centaurea jacea L. for Mn, Pb and As.     

Soil Contamination by Pb, Zn and Cn from a Lead Smeltery

In the environment of a lead smeltery contamination with lead, zinc and cadmium was measured over a 15-year period. Efficient bag filters were installed in order to remove dust from the flue gases. This measure of improvement resulted in a drastic reduction of lead, zinc and cadmium content in suspended particles (by 92, 94 and 89%), to a lesser extent in depositions (by 79, 75 and 68%), whereas in household dust the reduction was considerably lower (by 53, 55 and 70%). It can be assumed that household dust contains also redispersed soil particles on which the dust from the smeltery flue gases has deposited over years. To determine to what extent contaminated soil continues to cause increased population exposure directly or through plants or pastures, in the period 1981–1985 the content of metallic ions in the soil was measured at three depths. Selective solubility of soil metallic compounds was analysed in water, in 1 mol ammoniumacetate solution and in 0.05 mol ethylenediaminetetra-acetic acid (EDTA) solution in relation to their solubility in suspended particles, depositions and household dust. A considerably low portion of soluble metallic compounds was found in the soil and physico-chemical characteristics of the soil and portion of metallic ions bound to fulvice and humic acids were determined. The behaviour of metallic ions in contact with soil samples was studied in laboratory and it was found that approximately 50% of lead, 70% of zinc and 7% of cadmium ions change into non-soluble or poorly soluble compounds. By qualitative phase analysis in the non-soluble fraction PbO₂, Pb₃P₄O₁₃, Zn(OH)₂, ZnO, Fe₂O₃ and Cd(OH)₂ were identified.     

Extending the use of air quality indices to reflect effective population exposure

Although there are tendencies to develop a single common index which would describe an overall air quality status within an area, constructed from a choice of measurements of individual pollutants, indices describing individual pollutants themselves have several potentials which can be used in ways which are not possible with pollutant concentrations. On the case of Belgrade, Serbia, we investigated possibilities of using such indices for comparisons between pollutants, characterization of monitoring sites, and extending their use to include elements of population exposure. A methodology of adjusting the results obtained at monitoring stations located in severe pollution conditions, like street canyons, is proposed and used.     

Arsenic distribution in water/sediment system of Sevojno

Arsenic is a toxic and carcinogenic element. Its toxicity depends on its oxidation state and its concentration. The aim of this paper is to determine, for the first time, the concentration levels of arsenic in water and sediment during the spring/summer period of 2009 in Sevojno, a region in West Serbia with a long industrial tradition, as well as to determine the model of arsenic distribution in water/sediment system and the level of its compatibility with the existing theoretical model. Adsorption is a continual process in the environment. It plays a very important role in the transport and fate of pollutants, especially in sediment. The adsorption of arsenic was examined using the Freundlich adsorption isotherm.