First-trimester prenatal diagnosis of spinal muscular atrophy using microsatellite markers

Twenty-five pregnancies at risk for spinal muscular atrophy I (SMA I) have been monitored by first-trimester prenatal diagnosis. Microsatellite markers were used in all cases to amplify polymorphic regions at the D5S125, D5S435, D5S39, D5S127, and D5S112 loci. All families, including 12 SMA I pedigrees with a deceased index child, were fully informative for DNA analysis. Three fetuses were predicted to be affected and 22 fetuses were predicted to be unaffected. Twenty-two newborns were unaffected by clinical examination at birth. These results support the accuracy of SMA I prenatal diagnosis based on linkage analysis.     

Catalytic hydrodechlorination of 1,2-dichloroethane using copper nanoparticles under reduction conditions of sodium borohydride

1,2-Dichloroethane (1,2-DCA) is a raw material used for the manufacture of vinyl chloride monomer (VCM) and therefore has very often been detected in the groundwater nearby the VCM manufacturing plant. Zero-valent iron (ZVI) is capable of degrading a wide array of highly chlorinated contaminants; however, the reactivity of ZVI towards 1,2-DCA is very low. In this study, zero-valent copper nanoparticles have been synthesized for effective dechlorination of 1,2-DCA under reduction conditions of sodium borohydride. Copper nanoparticles consisted of mainly metallic copper (Cu(0)) with small amounts of cuprous oxide (Cu(2)O). They have surface areas of about 19.0 m(2) g(-1) and an average diameter of 15 nm. Batch experiments were conducted to test the effectiveness of copper nanoparticles for 1,2-DCA degradation using sodium borohydride as electron donors where the ORP was measured as -1100 mV. More than 80% of 1,2-DCA (30 mg L(-1)) was rapidly degraded within 2 h in the presence of both copper nanoparticles (2.5 g L(-1)) and borohydride (25 mM). No reduction of 1,2-DCA was observed when the system contained either copper nanoparticles alone or borohydride alone. The degradation intermediates included ethane and ethylene accounting for 79% and ～1.5% of the 1,2-DCA lost, respectively. Potential environmental applications can be achieved by immobilizing copper nanoparticles onto the surface of reducing metals to form a reactive bimetallic structure.     

Chemically coupled microwave and ultrasonic pre-hydrolysis of pulp and paper mill waste-activated sludge: effect on sludge solubilisation and anaerobic digestion

The effects of alkali-enhanced microwave (MW; 50–175 °C) and ultrasonic (US) (0.75 W/mL, 15–60 min) pretreatments, on solubilisation and subsequent anaerobic digestion efficiency of pulp and paper mill waste-activated sludge, were investigated. Improvements in total chemical oxygen demand and volatile suspended solids (VSS) solubilisation were limited to 33 and 39 % in MW pretreatment only (175 °C). It reached 78 and 66 % in combined MW–alkali pretreatment (pH 12?+?175 °C), respectively. Similarly, chemical oxygen demand and VSS solubilisation were 58 and 37 % in US pretreatment alone (60 min) and it improved by 66 and 49 % after US–alkali pretreatment (pH 12?+?60 min), respectively. The biogas yield for US 60 min–alkali (pH 12)-pretreated sludge was significantly improved by 47 and 20 % over the control and US 60 reactors, respectively. The biogas generation for MW (150 °C)–alkali (pH 12)-pretreated sludge was only 6.3 % higher than control; however, it was 8.3 % lower than the MW (150 °C) reactor, which was due to the inhibition of anaerobic activity under harsh thermal–alkali treatment condition.     

The impact of semiconductor, electronics and optoelectronic industries on downstream perfluorinated chemical contamination in Taiwanese rivers

This study provides the first evidence on the influence of the semiconductor and electronics industries on perfluorinated chemicals (PFCs) contamination in receiving rivers. We have quantified ten PFCs, including perfluoroalkyl sulfonates (PFASs: PFBS, PFHxS, PFOS) and perfluoroalkyl carboxylates (PFCAs: PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA) in semiconductor, electronic, and optoelectronic industrial wastewaters and their receiving water bodies (Taiwan's Keya, Touchien, and Xiaoli rivers). PFOS was found to be the major constituent in semiconductor wastewaters (up to 0.13 mg/L). However, different PFC distributions were found in electronics plant wastewaters; PFOA was the most significant PFC, contributing on average 72% to the effluent water samples, followed by PFOS (16%) and PFDA (9%). The distribution of PFCs in the receiving rivers was greatly impacted by industrial sources. PFOS, PFOA and PFDA were predominant and prevalent in all the river samples, with PFOS detected at the highest concentrations (up to 5.4 μg/L).     

沉积物毒性鉴别评估技术在一个有着多重污染物输入地点的应用

沉积物毒性鉴别评估用于确定造成沉积物整体毒性测试中观察到有害效果的原因。然而在多污染物的情况下,将总体毒性划分为为不同个体污染物单独造成的毒性的方法存在很多问题。利用一个有着多重输入与相关污染物的站点数据,我们为毒性鉴别评估提出一种通过追踪毒性单位（TUs）来确定是否囊括全部毒性的方法。首先确定出沉积物整体的毒性水平,然后将毒性来源划分至几种污染物大类,例如氨类,金属,非极性有机物等。本文中毒性很大程度上来源于非极性有机物,所以在萃取沉积物之后,将萃取物重新加回稀释水中以检测毒性的复原。每一部分污染物的毒性占比由溶剂梯度测量,并进行毒性检测。目标占比由气相色谱-质谱分析得到,从而鉴定出与特定成分相关的毒性。之后对这些成分相关的毒性单位进行测定以确定可能的原因组合和是否已囊括全部毒性。数据表明毒性既与已有化合物相关,又与新兴污染物相关,而两种污染物对于总体毒性的具体贡献则随实验地点改变。
精选自Howard C. Bailey, Catherine A. Curran, Peter Arth, Bonnie P. Lo, Rich Gossett. Application of Sediment Toxicity Identification Evaluation Techniques to a Site with Multiple-Contaminants. Environmental Toxicology and Chemistry: Volume 35, Issue 10, pages 2456–2465, October 2016. DOI: 10.1002/etc.3488
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3488/full
     

Uncertainty in watershed response predictions induced by spatial variability of precipitation

Negligence to consider the spatial variability of rainfall could result in serious errors in model outputs. The objective of this study was to examine the uncertainty of both runoff and pollutant transport predictions due to the input errors of rainfall. This study used synthetic data to represent the “true” rainfall pattern, instead of interpolated precipitation. It was conducted on a synthetic case area having a total area of 20 km² with ten subbasins. Each subbasin has one rainfall gauge with synthetic precipitation records. Six rainfall storms with varied spatial distribution were generated. The average rainfall was obtained from all of the ten gauges by the arithmetic average method. The input errors of rainfall were induced by the difference between the actual rainfall pattern and estimated average rainfall. The results show that spatial variability of rainfall can cause uncertainty in modeling outputs of hydrologic, which would be transport to pollutant export predictions, when uniformity of rainfall is assumed. Since rainfall is essential information for predicting watershed responses, it is important to consider the properties of rainfall, particularly spatial rainfall variability, in the application of hydrologic and water quality models.     

Effect of spatial variability of storm on the optimal placement of best management practices (BMPs)

It is significant to design best management practices (BMPs) and determine the proper BMPs placement for the purpose that can not only satisfy the water quantity and water quality standard, but also lower the total cost of BMPs. The spatial rainfall variability can have much effect on its relative runoff and non-point source pollution (NPSP). Meantime, the optimal design and placement of BMPs would be different as well. The objective of this study was to discuss the relationship between the spatial variability of rainfall and the optimal BMPs placements. Three synthetic rainfall storms with varied spatial distributions, including uniform rainfall, downstream rainfall and upstream rainfall, were designed. WinVAST model was applied to predict runoff and NPSP. Additionally, detention pond and swale were selected for being structural BMPs. Scatter search was applied to find the optimal BMPs placement. The results show that mostly the total cost of BMPs is higher in downstream rainfall than in upstream rainfall or uniform rainfall. Moreover, the cost of detention pond is much higher than swale. Thus, even though detention pond has larger efficiency for lowering peak flow and pollutant exports, it is not always the determined set in each subbasin.     

Removal of natural organic matter by cationic hydrogel with magnetic properties

Magnetic cationic hydrogel (MCH) was synthesized, and its removal efficiency and mechanisms in regard to natural organic matter (NOM, represented by humic acid and fulvic acid) from the aqueous environment were studied. The effects of time, adsorbent dosage, initial pH, ionic strength, background ions, and NOM types were also investigated. MCH was characterized and found to have a strong magnetic character, yielding an extra advantage for recycling and reuse. Batch studies showed that the removal of Aldrich humic acid (AHA) by MCH was effective. The main mechanism for the removal of NOM is believed to be due to electrostatic interaction. NOM with larger molecular weight tended to be preferentially removed. Solutions with low pH, high ionic strength, and background electrolytes containing calcium, sulfate and bicarbonate were unfavorable for AHA removal. The adsorption-desorption of MCH was evaluated in three cycles, and demonstrated high regeneration rates.     

Diversity and complexity in the acoustic behaviour of Dacyllus flavicaudus (Pomacentridae)

Synchronous underwater audio–video recordings and a passive acoustic detector were used to study the behaviour of Dascyllus flavicaudus. These damselfish produced sounds during six different behaviours and showed three different colour patterns while doing so. These sounds can be grouped into three classes: sounds associated with (1) fighting; (2) mating/visiting and (3) chasing and signal jumps. Moreover, the evolution of the different kinds of sound is discussed: the first calls could be a single pulse originating in teeth snapping. Modifications in the rhythm and number of pulses allowed the fish to build new messages. Daily recordings showed that sound production rates were higher at sunrise and sunset than during the day and that no sound was produced during the night. However, the kinds of call were different: sunrise sounds seemed mainly associated with mating/visiting, whereas the sounds associated with chasing and to signal jumps were mainly found at sunset.