铝生产过程碱烧伤事故及对策

通过对山西铝厂氧化铝分厂5年的碱烧伤事故分析与研究,指出了发生该类事故的原因,提出了在氧化铝生产中预防的对策,对氧化铝生产企业降低碱烧伤事故具有指导意义。     

我国农业县（市）绿色食品发展对策研究

发展绿色食品是实现区域可持续发展和发展生态农业的一条有效途径。本文分析了我国农业县（市）发展绿色食品普遍存在的问题,在此基础上提出了发展绿色食品的对策。     

Anheuser-busch's a pledge and a promise: Total employee involvement

Anheuser-Busch is a large, diversified corporation, both in its products and in its environmental efforts. It is well-known that Anheuser-Busch is the world'S largest brewer, with twelve operating breweries and a thirteenth under construction. It also operates the largest aluminum can recycling network in the world, Anheuser-Busch Recycling (A-BR). A-BR recycled more than 600 million pounds of aluminum in 1991, or more than 17 billion cans. This article describes how Anheuser-Busch has put TQEM ideas into practice involving all of its employees.     

Reliability and validity of aggressive driving measures in China

The present research was designed to examine the psychometric properties of Chinese versions of the Self Report Driver Behavior Aggression and Assertiveness subscales, the Driving Vengeance Questionnaire, and the Violent Driving Questionnaire. Study 1 found that the all scales demonstrated good internal consistency, with alphas ranging from .76 to .87 and that assertive driving was related to demerit points received over the past 12 months while driver aggression and violence were linked to collisions over the past 12 months. Study 2 found that the scales exhibited reasonable test-retest reliability, with correlations ranging from .82 to .89. Finally, Study 3 showed that each scale was predicted by other dangerous driving attitudes and behaviors, similar to the original versions. The consistency between the translated and original scales, the implications for use in a Chinese sample, and the uniformity of actions in the traffic environment across cultures are discussed.     

基础弹性刚度变化对铁路简支梁桥地震响应的影响研究

以某特大铁路简支梁桥为例 ,考虑m值变化对基础弹性刚度的影响 ,笔者建立了铁路简支梁桥单墩有限元计算分析模型 ;运用大型通用软件ANSYS ,采用时程分析方法 ,对不同地震输入激励条件下的桥墩动力响应进行计算研究 ;研究结果表明 ,m值变化引起的基础竖向刚度的变化对桥梁结构地震响应的影响较大。笔者的研究成果为硬土质基础的铁路简支梁桥的抗震安全设计 ,提供了重要参考。     

239+240Pu, 90Sr and 137Cs inventories in surface soils of Vietnam

Fallout 239+240Pu, 238Pu, 90Sr and 137Cs inventories in surface soils were measured for 20 locations in northern Vietnam yielding the mean values (+/- standard error) of 26.5+/-3.8 Bq m(-2) for 239+240Pu, 1048+/-143 Bq m(-2) for 137Cs and 212+/-28 Bq m(-2) for 90Sr. The concentrations of 137Cs and plutonium isotopes strongly correlate with each other resulting in a stable 239+240Pu/137Cs inventory ratio of 0.025+/-0.002. Among soil parameters, organic matter and fulvic acids strongly correlate with caesium and plutonium isotopes, especially in the 0-10 cm layer. 137Cs and 239+240Pu are distributed rather similarly over the 0-10 cm and 10-20 cm layers. At locations with high contents of sand (82-93%) along the South China Sea coast, the downward percolation by rainwater results in a higher accumulation of 239+240Pu and 137Cs in the 10-20 cm layer. The mean 137Cs/ 90Sr inventory ratio is 9.3+/-2.2, and the correlation is weak between these isotopes.     

Development and performance of the vehicle-mounted radiation monitoring equipment used in the Maralinga rehabilitation project

The rehabilitation of the former nuclear test site at Maralinga involved (among other processes) the removal of contaminated soil from an area of approximately 2.5 km2. The two most stringent rehabilitation criteria required measurements to ensure that no radioactive particle exceeding 100 kBq of 241Am activity, and no area of 1 ha exceeding 3 kBq/m2 of 241Am activity, remained in the rehabilitated area. The project timetable required that the area be scanned at the rate of approximately 3 ha/day. Two vehicle-mounted detection systems were developed and constructed to obtain the necessary measurements in the available timeframe. The scientific basis for the designs are presented, together with details of the selected equipment and technical solutions found. The performance of this equipment in the field is discussed in terms of both its scientific and technical operation. Based on the experience gained at Maralinga, improved versions of this equipment were produced under contract for the People's Republic of China.     

Surface runoff losses of copper and zinc in sandy soils

Increased anthropogenic inputs of Cu and Zn in soils have caused considerable concern relative to their effect on water contamination. Copper and Zn contents in surface soil directly influence the movement of Cu and Zn. However, minimal information is available on runoff losses of Cu and Zn in agricultural soils, and soil-extractable Cu and Zn in relation to runoff water quality. Field experiments were conducted in 2001 to study dissolved Cu and Zn losses in runoff in Florida sandy soils under commercial citrus and vegetable production and the relationship between soil-extractable Cu and Zn forms and dissolved Cu and Zn concentrations in runoff water. Five extraction methods were compared for extracting soil available Cu and Zn. Concentrations of dissolved Cu and Zn in runoff were measured and runoff discharge was monitored. Mean dissolved Cu in field runoff water was significantly correlated with the extractable Cu obtained only by 0.01 mol L(-1) CaCl2, Mehlich 1, or DTPA-TEA methods. Dissolved Zn in runoff water was only significantly correlated with extractable Zn by 0.01 mol L(-1) CaCl2. The highest correlations to dissolved Cu in runoff were obtained when soil-available Cu was extracted by 0.01 mol L(-1) CaCl2. The results indicate that 0.01 mol L(-1) CaCl2-extractable Cu and Zn are the best soil indexes for predicting readily released Cu and Zn in the sandy soils. Both runoff discharge and 0.01 mol L(-1) CaCl2-extractable Cu and Zn levels had significant influences on Cu and Zn loads in surface runoff.     

Enzymatic characterization of organic phosphorus in animal manure

Information on the forms of P present in animal manure may improve our ability to manage manure P. In most investigations of manure P composition, only inorganic and total P are determined, and the difference between them is assigned as organic P. In this study, we explored the possibility of identifying and quantifying more specific organic P forms in animal manure with orthophosphate-releasing enzymes. Pig (Sus scrofa) manure and cattle (Bos taurus) manure were first sequentially fractionated into water-soluble P, NaHCO3-soluble P, NaOH-soluble P, HCl-soluble P, and residual P. The fractions were separately incubated with wheat phytase, alkaline phosphatase, nuclease P1, nucleotide pyrophosphatase, or their combinations. The released orthophosphate was determined by a molybdate blue method. Part of the organic P in those fractions could be identified by the enzymatic treatments as phytate (i.e., 39% for pig manure and 17% for cattle manure in water-soluble organic P), simple phosphomonoesters (i.e., 43% for pig manure and 15% for cattle manure in NaOH-soluble organic P), nucleotide-like phosphodiesters (2-12%), and nucleotide pyrophosphate (0-4%). Our data indicate that the enzymatic treatment is an effective approach to identify and quantify the organic P forms present in animal manures.     

Carbon disulfide at a Chinese viscose factory external and internal exposure assessment

This article presents the results of carbon disulfide exposure measurements in a Chinese viscose rayon factory. The objectives of the study were to identify the external exposure levels at a large factory and to investigate the 2-thiothiazolidine-4-carboxylic acid (TTCA) concentrations in the urine of the subjects who were exposed to carbon disulfide in the working place atmosphere. The metabolism of carbon disulfide in the exposed subjects was also studied in order to demonstrate the best points in time for the internal exposure sampling. The measurement of the amount of personal exposure to carbon disulfide in the air of the workplace was performed by GC-FPD; the presence of TTCA in the workers urine was analyzed by use of a modified HPLC method. The kinetics of TTCA excretion was studied by analyses at different time-points both during and after exposure to carbon disulfide in the subjects. A total of 155 personal samples were obtained. The carbon disulfide concentration in the staple viscose hall was 13.72 +/- 1.12 mg m-3 in terms of the geometric mean +/- geometric standard deviation, and was 20.05 +/- 1.33 mg m-3 in the filament spinning hall. The TTCA values in the subjects who worked in the staple spinning hall were 1.18 +/- 0.43 mg g-1 creatinine and 1.07 +/- 0.38 mg g-1 creatinine for subjects working in the filament spinning hall. The best time for TTCA sampling is at the end of the working shift, the TTCA excretion was stable for a period of 4-12 h after exposure of the subjects to the carbon disulfide. It might be that the Chinese have different anthropometric characteristics; a sampling bias may therefore appear among different races.