Formation pathways of polychlorinated dibenzofurans (PCDFs) in sediments contaminated with PCBs during the thermal desorption process

Thermal desorption has attracted considerable interest as a remediation technology for the removal of dioxins and polychlorinated biphenyls (PCBs) from contaminated soils and sediments. Although several research groups have confirmed that polychlorinated dibenzofurans (PCDFs) are formed from PCBs during the thermal desorption of sediments contaminated with PCB, the formation pathways remain poorly understood. Herein, thermal desorption has been used to develop a greater understanding of the formation pathways of PCDFs from sediments contaminated with PCBs. PCB decomposition experiments of sediments contaminated with PCBs were performed over 5 min at 450 °C with a gas composition of 10% O(2)/90% N(2), either in the absence (Run 1) or presence (Run 2-4) of one of three different (13)C(12)-labeled PCB individual standards. The results of Run 1 showed that 99.96% of PCBs and 98.40% of polychlorinated dibenzo-p-dioxins (PCDDs) in the treated sediments had decomposed, whereas the concentration levels of PCDFs had increased by a factor of 31. The addition of different (13)C(12)-labeled PCBs to the sediment sample yielded different (13)C(12)-PCDFs isomer patterns, with formation pathways including loss of ortho-Cl(2), loss of HCl involving a 2,3-chlorine shift, loss of ortho-H(2) and dechlorination.     

以羟胺为底物的自养脱氮微量热研究

羟胺（NH₂OH）是单级自养脱氮系统物质转化的重要中间产物。从稳定运行（氨氮去除率维持90%以上,总氮去除率维持在80%以上）的单级自养脱氮工艺（SBBR）取活性污泥放入量热池,加入不同浓度N-NH₂OH（40～200 mg/L）进行量热实验研究。结果表明,用Boltzmann模型可以很好地表达量热值与NH₂OH浓度的关系,超过一定浓度的羟胺会抑制微生物活性,自营养脱氮过程的产热增量降低。     

微波修复原油污染土壤的均匀设计实验

采用均匀设计实验方法,研究了微波修复原油污染土壤时原油去除率与微波能耗、含水率和含炭率等因素的关系,并应用MATLAB编程拟合出经验公式。结果分析表明:微波能耗在0～288 kJ范围内,污染土壤的原油去除率随微波能耗线性增加;在含水率为6%、含炭率为4%、微波能耗从0增加到288 kJ时,原油去除率从0%增加至92.3%;含炭率在0%～4%范围内原油去除率与含炭率成线性关系,在微波能耗为288 kJ、含水率为6%、含炭率从0%增加到4%时,原油去除率从12.3%增加至92.3%;原油去除率与含水率成二次曲线关系且开口向下,微波修复原油污染土壤的最佳含水率为6.6%。研究结果对微波修复原油污染土壤技术的优化提供了有价值的参考。     

Analysis of arable land loss and its impact on rural sustainability in Southern Jiangsu Province of China

Rapid urbanization and industrialization in southern Jiangsu Province have consumed a huge amount of arable land. Through comparative analysis of land cover maps derived from TM images in 1990, 2000 and 2006, we identified the trend of arable land loss. It is found that most arable land is lost to urbanization and rural settlements development. Urban settlements, rural settlements, and industrial park-mine-transport land increased, respectively, by 87 997 ha (174.65%), 81 041 ha (104.52%), and 12 692 ha (397.99%) from 1990 to 2006. Most of the source (e.g., change from) land covers are rice paddy fields and dryland. These two covers contributed to newly urbanized areas by 37.12% and 73.52% during 1990–2000, and 46.39% and 38.86% during 2000–2006. However, the loss of arable land is weakly correlated with ecological service value, per capita net income of farmers, but positively with grain yield for some counties. Most areas in the study site have a low arable land depletion rate and a high potential for sustainable development. More attention should be directed at those counties that have a high depletion rate but a low potential for sustainable development. Rural settlements should be controlled and rationalized through legislative measures to achieve harmonious development between urban and rural areas, and sustainable development for rural areas with a minimal impact on the ecoenvironment.     

稠油火驱开采技术节能减排效果分析

火驱作为稠油热采的有效接替技术,与注蒸汽开采技术相比,具有采收率高,能耗低,CO_2排放少的优势。文章从火驱驱油机理特征阐述了火驱与注蒸汽技术的不同点,从燃料开采能耗、热效率、注入剂资源、数据对比四个方面分析火驱比注蒸汽热效率高,无燃料开采成本,能耗是注蒸汽的50%;从CO_2气体排放方式和排放量对比可知,火驱能够减少温室气体排放,为油田节能减排、环保生产起到积极作用。     

Bio-immobilization of Cu and Zn in recirculated bioreactor landfill

Purpose  

To protect the environmental quality of soil, groundwater, and surface water near the landfill site, it is necessary to make an accurate assessment of the heavy metal mobility. This study aims to present the bio-immobilization behavior of heavy metals in landfill and provide some reference suggestion for the manipulation of heavy metal pollution control after closure.     

多孔富铁填料曝气过滤除磷机理研究

采用多孔富铁填料的曝气过滤装置具有优良的除磷性能,理论分析研究了多孔富铁填料的除磷机理,通过铁细菌测定、电镜扫描、红外光谱分析等实验对其除磷机理进行了验证。结果表明,多孔富铁填料除磷为化学除磷过程,铁的形态转化中存在铁细菌的氧化作用,沉淀物以碱式磷酸铁为主。     

ASBBR-二级SBBR-化学除磷组合工艺处理榨菜腌制废水

针对榨菜腌制废水高盐高氮磷高有机物浓度的特征,提出"厌氧序批式生物膜反应器(ASBBR)-二级序批式生物膜反应器(SBBR)-化学除磷"组合处理工艺,在前期对组合工艺中单元工艺的关键工况参数研究的基础上,考察组合工艺的处理效能。实验结果表明,采用该组合工艺,可使进水COD、NH4+-N、TN及PO43--P分别为10 000、345、550和38.5mg/L的榨菜腌制废水,处理出水COD、NH4+-N、TN及PO43--P分别达到93.6、12.3、18和0.1 mg/L,去除率分别为99.1%、96.4%、96.7%和99.9%,出水达到污水综合排放一级标准。     

介质阻挡放电联合催化臭氧化降解甲苯

采用介质阻挡放电区后结合MnOx/Al2O3/发泡镍去除甲苯,考察甲苯进气方式、臭氧产生方法及湿度对甲苯与O3同时去除的影响。结果表明,O3是等离子体区后催化降解甲苯的主要物种,介质阻挡放电联合催化臭氧化可实现甲苯及O3的同时高效去除。输入电压为9.0 kV时,甲苯的去除效率达92.8%,在80 min内O3的去除效率维持在99%以上。水蒸气对催化剂催化分解臭氧的活性没有直接的影响,O3浓度较高时湿度对甲苯降解效率的影响很小。GC-MS分析结果表明,甲苯降解的主要气相副产物有烷烃、酸、酮和含苯环有机物,提出了甲苯的降解途径。     

Fenton氧化-活性炭吸附耦合处理焦化废水生化尾水的研究

研究了Fenton氧化、活性炭吸附、Fenton氧化一活性炭吸附等方法,对焦化废水生化尾水的处理效果,分析了Fenton氧化一活性炭吸附法处理焦化废水生化尾水的工艺条件。结果表明,Fenton氧化与活性炭吸附耦合处理焦化废水生化尾水的最优条件是：H2O2投加量为5mL／L,FeSO4·7H2O投加量为200mg／L,活性炭投加量为2g／L,反应pH=4．0,反应时间为20min。在此条件下,COD去除率可达82．6％,出水水质符合《污水综合排放标准》（GB8978--1996）一级标准。