Saguenay河溶解有机质光化学生成溶解无机碳的研究

溶解有机质作为水生生态系统中一种重要的活跃的有机组分,对生态系统中的碳循环起到重要的作用.利用模拟太阳光对Saguenay河溶解有机质的光氧化过程模拟,研究了溶解氧浓度、模拟太阳光波长范围和铁浓度对溶解无机碳产量的影响.研究表明,基于空气饱和样品前72 h的溶解无机碳产量1.39 μmol·L-1·h-1,氧气饱和条件下照射的溶解无机碳产量增加了52.5%,而氮气饱和条件下的照射则只有空气饱和样品的10%.实验以Mylar-D、有机玻璃UF-3和有机玻璃UF-4为滤光片研究了波长范围对溶解无机碳产量的影响,近似计算的结果表明UV-B、UV-A和可见光部分分别占无机碳产量的16.5%,55.4%和28.0%,表明溶解无机碳的生成可发生在紫外光无法到达的水体较深区域.铁在光化学催化氧化过程中起重要作用,当总铁浓度达到10 μmol·L-1时,有效的增加了溶解无机碳的生成速率,其生成速率约为初始样品的1.68倍(初始样品中总铁含量为3.2 μmol·L-1).     

Peak exposures in aluminium potrooms: instrument development and field calibration

Aluminium smelter potrooms are unique in that workplace exposures to hydrogen fluoride (HF), sulfur dioxide (SO2), and particulate matter occur simultaneously for some tasks. The peak exposures to these contaminants are of increasing interest in discovering the etiology of respiratory health effects. While a variety of direct-reading instruments are available for sulfur dioxide and particulate matter, only a few exist for hydrogen fluoride. The sensors in these HF instruments have a cross-sensitivity to sulfur dioxide making it difficult to monitor HF in an environment that also contains SO2. To overcome this problem, we assessed the simultaneous use of two electrochemical instruments: one with a SO2 sensor that does not respond to HF and the second with a hydrogen fluoride sensor that responds to both HF and SO2 in a 1 : 1 ratio, termed 'total acid gas'. The difference in the response between the two instruments should indicate the HF concentration: [HF + SO2] minus SO2 equals HF. The performance characteristics of this sampling train were evaluated in the laboratory through the generation of both HF and SO2 with permeation tubes. The response and recovery times for the SO2 only instrument were acceptable (6 and 15 s, respectively), but the "total acid gas" instrument exhibited both slow response and slow recovery approaching three and six min. The association between the traditional integrated filter sampling method and the direct-reading instrument for SO2 is 0.80 (Spearman's rho). The use of the digital filter strengthens the association between the HF direct-reading instrument and the integrated samples from 0.41 to 0.68.     

Bamboo in climate change and rural livelihoods

Climate change negotiations, assessments, and greenhouse gas inventory guidelines have all but bypassed bamboo. Disallowing stands of tree-like bamboos as forests disparages their function in the carbon (C) cycle, and disregards pillars of smallholder livelihoods. Exposing bamboo not as a panacea, but as an overlooked option for C conservation, sequestration, and adaptation, we screen details of distribution, morphology, growth, physiology, and impacts for pertinence to climate change. Additional to 40 million hectares of existing bamboo forests, many potential host countries for C projects harbor suitable sites. Definitions, methods and default values, such as the root/shoot- ratio, biomass conversion factors, allometric equations and sampling variables need adjusting. Rapid maturation, persistent rhizomes, a rich palette of species, and wind-firmness may mitigate risk. Bamboos can accommodate agro-and urban forestry, and reign in unsustainable shifting cultivation. Distribution functions of bamboo biomass stocks and growths do not deviate drastically from those of trees. If anything, bamboo stocks are slightly lower, and growths slightly higher, with medians of 87 t*ha⁻¹ and 10.5 t*ha⁻¹*yr⁻¹, respectively. However, bamboo’s outstanding socio-economic effects might well determine its future in mitigation and adaptation. Early, continuous yields, selective harvesting on even small parcels of land, low capital and high labor intensity, virtually 100% conversion efficiency to about 1,500 products, and, typically, 75% of economic returns benefiting rural people are advantageous attributes. Regional studies on suitability, silviculture, yields, economics, risk, and C assessment would strengthen bamboo’s function as ‘the poor man’s timber’ and promote its niche as the smallholder’s C sink.     

The bioaerosols emitted from toilet and wastewater treatment plant: a literature review

Environmental Science and Pollution Research - The aerosols harboring microorganisms and viruses released from the wastewater system into the air have greatly threatened the health and safety of...     

Is urban development an urban river killer? A case study of Yongding Diversion Channel in Beijing, China

The high population and concrete environment alter urban areas by changing temperature, rainfall runoff, and water resource utilization activities. This study was conducted to investigate the water quality features of the Yongding Diversion Channel in Beijing, China, and its relationship with rainfall and urban development. Monthly water quality data were obtained from April to October of 2004 at monitoring sites of Sanjiadian, Gaojing, Luodaozhuang, and Yuyuangtan. The monthly water quality grades from 2007 to 2011 were also investigated and compared with those of other rivers. Dissolved oxygen and pH showed greater decreases after one or two moderate rainfall events than several light rainfall events. The potassium permanganate index （CODMn）, ammonia nitrogen （NH3-N） and total phosphorus （TP） increased more after several light rainfall events than after one or two moderate or heavy rainfall events. Pollutant concentrations （CODMn, NH3-N, TP） in downstream regions showed greater changes than those in upstream areas after heavy rainfall events. Intense human activities around the channel greatly influenced the water quality of the channel in rainy season because of runoff pollution; however, heavy rainfall had a strong dilution effect on the pollutant concentrations in rivers. Overall, urban development has obviously deteriorated the water quality of the Yongding Diversion Channel as indicated by an increase in the water quality index from 3.22 in 2008 to 4.55 in 2010. The Pearson correlation between monthly rainfall and water quality indices from 2007 to 2011 ranged from 0.1286 to 0.6968, generally becoming weaker as rainfall and rainfall runoff became more random and extreme.     

Accumulation of radiocesium by mushrooms in the environment: a literature review

During the last 50 years, a large amount of information on radionuclide accumulators or "sentinel-type" organisms in the environment has been published. Much of this work focused on the risks of food-chain transfer of radionuclides to higher organisms such as reindeer and man. Until the 1980s and 1990s, there were few published data on the radiocesium ((134)Cs and (137)Cs) accumulation by mushrooms. The present review of published data for (134,137)Cs accumulation by mushrooms in nature discusses the aspects that promote (134,137)Cs uptake by mushrooms and focuses on mushrooms that demonstrate a propensity for use in the environmental biomonitoring of radiocesium contamination. Transfer factors (TF, as dry weight concentration in fruiting body divided by concentration in substrate) ranged up to 24 (unitless), and aggregate transfer factors (T(ag), as Bq(137)Cs/kg dw in fruiting body divided by the aerial deposition as Bq/m(2)) ranged up to 8m(2)/kg dw.     

Influence of alkalinity, hardness and dissolved solids on drinking water taste: A case study of consumer satisfaction

Two surveys of consumer satisfaction with drinking water conducted by Taiwan Water Supply Corp. are presented in this study. The study results show that although a lot of money was invested to modify traditional treatment processes, over 60% of local residents still avoided drinking tap water. Over half of the respondents felt that sample TT (from the traditional treatment process) was not a good drinking water, whether in the first or second survey, whereas almost 60% of respondents felt that samples PA, PB, CCL and CT (from advanced treatment processes) were good to drink. For all drinking water samples, respondent satisfaction with a sample primarily depended on it having no unpleasant flavors. Taiwan Environmental Protection Administration plans to revise the drinking water quality standards for TH and TDS in the near future. The new standards require a lower TH concentration (from currently 400mg/L (as CaCO(3)) to 150mg/L (as CaCO(3))), and a lower TDS maximum admissible concentration from the current guideline of 600 to 250mg/L. Therefore, this study also evaluated the impacts on drinking water tastes caused by variations in TH and TDS concentrations, and assessed the need to issue more strict drinking water quality standards for TH and TDS. The research results showed that most respondents could not tell the difference in water taste among water samples with different TDS, TH and alkalinity. Furthermore, hardness was found to be inversely associated with cardiovascular diseases and cancers, and complying with more strict standards would lead most water facilities to invest billions of dollars to upgrade their treatment processes. Consequently, in terms of drinking water tastes alone, this study suggested that Taiwan Environmental Protection Administration should conduct more thorough reviews of the scientific literature that provides the rationale for setting standards and reconsider if it is necessary to revise drinking water quality standards for TH and TDS.     

Photochemical alteration of the molecular weight of dissolved organic matter

Molecular weight (MW) is a key control on the physical, chemical, and biological characteristics of dissolved organic mater (DOM). This study investigated the effect of photooxidation on the average MW of DOM by exposing DOM of diverse origins to simulated solar radiation at varying levels of dissolved oxygen and under different incident light wavelength regimes. During irradiation, high-molecular-weight fractions were destroyed and low-molecular-weight constituents were formed. The average MW decreased with irradiation time in all treatments in a manner that can be described by a quasi-exponential function, which suggests that solar radiation is incapable of completely mineralizing DOM even after prolonged exposure. Increasing the oxygen concentration accelerated the MW reduction while the removal of oxygen strongly suppressed this process. The fractional contributions from UV-B, UV-A, and visible radiations to full-spectrum photoinduced MW reduction varied considerably among the DOM samples examined, ranging from 19% to 60%, 17% to 36%, and 15% to 46%, respectively. The MW changes in time-series irradiations were inversely correlated with the ratio of the absorbance at 250 nm to that at 365 nm (i.e., the E₂/E₃ quotient). Photoinduced MW reduction was accompanied by a decrease of polydispersity, which is indicative of a reduced DOM heterogeneity.     

Effectiveness of photocatalytic filter for removing volatile organic compounds in the heating, ventilation, and air conditioning system

Nowadays, the heating, ventilation, and air conditioning (HVAC) system has been an important facility for maintaining indoor air quality. However, the primary function of typical HVAC systems is to control the temperature and humidity of the supply air. Most indoor air pollutants, such as volatile organic compounds (VOCs), cannot be removed by typical HVAC systems. Thus, some air handling units for removing VOCs should be added in typical HVAC systems. Among all of the air cleaning techniques used to remove indoor VOCs, photocatalytic oxidation is an attractive alternative technique for indoor air purification and deodorization. The objective of this research is to investigate the VOC removal efficiency of the photocatalytic filter in a HVAC system. Toluene and formaldehyde were chosen as the target pollutants. The experiments were conducted in a stainless steel chamber equipped with a simplified HVAC system. A mechanical filter coated with Degussa P25 titania photocatalyst and two commercial photocatalytic filters were used as the photocatalytic filters in this simplified HVAC system. The total air change rates were controlled at 0.5, 0.75, 1, 1.25, and 1.5 hr(-1), and the relative humidity (RH) was controlled at 30%, 50%, and 70%. The ultraviolet lamp used was a 4-W, ultraviolet-C (central wavelength at 254 nm) strip light bulb. The first-order decay constant of toluene and formaldehyde found in this study ranged from 0.381 to 1.01 hr(-1) under different total air change rates, from 0.34 to 0.433 hr(-1) under different RH, and from 0.381 to 0.433 hr(-1) for different photocatalytic filters.     

水化氧化处理垃圾渗滤液生物处理后的尾水

经生物处理后垃圾渗滤液尾水的CODCr约在500~800 mg/L,此类CODCr除部分为有机物外,还含有大量还原性无机类物质,因此不适合采用常规的生物处理方法进行深度处理。本研究在投药量较低的情况下,采用水泥、NaAlO2和Ca(ClO)2等物质联合作用,取得较好的尾水CODCr去除效果(达到国家二级排放标准)。机理研究表明:渗滤液尾水CODCr的去除主要通过两种途径:一方面为常规的氧化作用,另一方面通过特殊的水化作用,可去除部分还原性无机类物质。